Package: mii-tool
Version: 1.60-22
Hi,
When looking at mii-tool -v's output, I see:
eth0: negotiated 100baseTx-FD flow-control, link ok
product info: Yukon 88E1011 rev 5
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD
10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD
10baseT-HD flow-control
The switch I'm using only supports 100 mbit, but the card itself
supports gigabit.
So the "link partner" advertising 1000baseT-HD looks wrong to me.
On the other hand, I only seem to be advertising 100baseTx-FD while
I can do 100baseTx-FD. It looks like those 2 lines are inverted?
Anyway, ethtool shows:
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Which makes more sense. However, it doesn't show the link
partner.
Looking at an other host, I see:
eth0: negotiated 100baseTx-FD, link ok
product info: vendor 00:00:00, model 0 rev 0
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
Which seems to suggest that the flow-control part is
at the correct line.
Kurt
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
