On Mon, Feb 16, 2009 at 10:03:42PM +0100, Philipp Kolmann wrote: > Simon Horman wrote: >> On Mon, Feb 16, 2009 at 08:22:18PM +0100, Philipp Kolmann wrote: >> >>> Package: heartbeat >>> Version: 2.1.3-6lenny0 >>> Severity: normal >>> >>> Hi Simon, >>> >>> it seems I am the one unlucky guy who uses heartbeat with IPv6.... >>> >>> I started updateing my cluster today to lenny and IPv6addr fails again: >>> >>> scs1:/etc/heartbeat/resource.d# ./IPv6addr 2001:629:3800:33:0:0:0:122 start >>> 2009/02/16_20:19:50 ERROR: Generic error >>> ERROR: Generic error >>> >>> >>> I dug into the source of IPv6addr.c and it seems that the mask is too long >>> and therefore the scan_if isn't matching. >>> >>> I have a 2001:629:3800:33::/64 subnet but it seems from my debug output >>> that IPv6addr tries to match /96 bits of the IP address which fails. >>> >>> My C knowledge is sadly too little to fix this myself. >>> >>> I would greatly be happy if you could help me with that. >>> >> >> Hi Philipp, >> >> that is very regrettable. I seem to recall spending some time >> on a very similar bug quite a while back, but I guess that >> something has slipped through the cracks. I'll try and track it down. >> >> Did you have a previous heartbeat setup that worked in this case? >> If only for bug tracking purposes it would be nice to know. >> > > Hi Simon, > > yea, I have only upgraded one server of the cluster. So I have etch > heartbeat still installed on the currenlty active clusterserver. > > Etch heartbeat worked after your help 2 years ago flawlessly ;) > > If needed I can also setup an etch cluster to help you...
Thanks. An etch cluster to test probably isn't neccessary at this point. -- Simon Horman VA Linux Systems Japan K.K., Sydney, Australia Satellite Office H: www.vergenet.net/~horms/ W: www.valinux.co.jp/en -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
