Package: installation-reports Boot method: CD Image version: Self-made boot CD with Lenny Debian Installer 5.0.0 Date: 2009-03-01
Machine: Self-made Desktop PC Processor: VIA C3 Nehemia 667MHz Memory: 512MB Partitions: <df -Tl will do; the raw partition table is preferred> > Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf > /dev/hda1 ext3 2885780 636284 2102908 24% / tmpfs tmpfs 250108 0 > 250108 0% /lib/init/rw udev tmpfs 10240 68 10172 1% /dev tmpfs tmpfs > 250108 0 250108 0% /dev/shm /dev/hda5 xfs 152302048 35293404 117008644 > 24% /storage Output of lspci -knn: > 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8623 [Apollo > CLE266] [1106:3123] Kernel driver in use: agpgart-via Kernel modules: > via-agp 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633 > [Apollo Pro266 AGP] [1106:b091] Kernel modules: shpchp 00:10.0 USB > Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 80) Kernel driver in use: uhci_hcd Kernel > modules: uhci-hcd 00:10.1 USB Controller [0c03]: VIA Technologies, > Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) Kernel > driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.2 USB > Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 80) Kernel driver in use: uhci_hcd Kernel > modules: uhci-hcd 00:10.3 USB Controller [0c03]: VIA Technologies, > Inc. USB 2.0 [1106:3104] (rev 82) Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd 00:11.0 ISA bridge [0601]: VIA Technologies, > Inc. VT8235 ISA Bridge [1106:3177] Kernel modules: via-ircc, > i2c-viapro 00:11.1 IDE interface [0101]: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] > (rev 06) Kernel driver in use: VIA_IDE Kernel modules: via82cxxx > 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 > [Rhine-II] [1106:3065] (rev 74) Kernel driver in use: via-rhine Kernel > modules: via-rhine 01:00.0 VGA compatible controller [0300]: VIA > Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock > graphics [1106:3122] (rev 03) Kernel modules: vt8623fb Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [E] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: The used Processor is a VIA C3 Nehemia Processor with 667MHz. Debian 4.0 "etch" has installed the 686 kernel. With Debian 5.0.0 "lenny", there is the 486 kernel installed. Because, this is only a file server, the 486 kernel works fine. There are no performance differences between the 486 kernel or the 686 kernel. >From my side, the bug report can be closed. This is only for information. Regards Bernhard -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
