Hmmm, it seems like it usually (rather than sometimes) fails to mount
the usb disk partitions.
Attached are the contents of /var/log/syslog and output of dmesg after
this morning's boot. The partitions failed to mount, but i can't see any
signs of a problem in the logs.
Again, a 'mount -a' after booting mounts everything without a problem -
so i don't think there are any problems in my /etc/fstab.
Alex
Debian Bug Tracking System wrote:
Thank you for filing a new Bug report with Debian.
This is an automatically generated reply to let you know your message
has been received.
Your message is being forwarded to the package maintainers and other
interested parties for their attention; they will reply in due course.
Your message has been sent to the package maintainer(s):
Base Maintainers <[email protected]>
If you wish to submit further information on this problem, please
send it to [email protected], as before.
Please do not send mail to [email protected] unless you wish
to report a problem with the Bug-tracking system.
--
Dr. Alex Sheppard
Mob: 0775 1074054
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2)
([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25))
#1 SMP Fri Mar 13 18:08:45 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fec0000 (usable)
[ 0.000000] BIOS-e820: 000000001fec0000 - 000000001fef8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fef8000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130752) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130752
[ 0.000000] HighMem 130752 -> 130752
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130752
[ 0.000000] On node 0 totalpages: 130752
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 990 pages used for memmap
[ 0.000000] Normal zone: 125666 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FF980, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1FEF0000, 002C (r1 D815EA D815EPFV 20010918 MSFT
1011)
[ 0.000000] ACPI: FACP 1FEF1000, 0074 (r1 D815EA EA81510A 20010918 MSFT
1011)
[ 0.000000] ACPI: DSDT 1FEE0000, 30E4 (r1 D815E2 EA81520A 23 MSFT
100000B)
[ 0.000000] ACPI: FACS 1FEF8000, 0040
[ 0.000000] ACPI: APIC 1FEE30E4, 0054 (r1 D815EA EA81510A 20010918 MSFT
1011)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
1ff00000:dfc80000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 129730
[ 0.000000] Kernel command line: root=/dev/hda1 ro
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 896.682 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 508612k/523008k available (1769k kernel code, 13828k
reserved, 752k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdfec0000 ( 510 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4d3 - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4d3 (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084284] Calibrating delay using timer specific routine.. 1795.53
BogoMIPS (lpj=3591063)
[ 0.084516] Security Framework initialized
[ 0.084591] SELinux: Disabled at boot.
[ 0.084656] Capability LSM initialized
[ 0.084755] Mount-cache hash table entries: 512
[ 0.085259] Initializing cgroup subsys ns
[ 0.085340] Initializing cgroup subsys cpuacct
[ 0.085404] Initializing cgroup subsys devices
[ 0.085524] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.085620] CPU: L2 cache: 128K
[ 0.085687] Intel machine check architecture supported.
[ 0.085753] Intel machine check reporting enabled on CPU#0.
[ 0.085856] Checking 'hlt' instruction... OK.
[ 0.100755] SMP alternatives: switching to UP code
[ 0.110953] Freeing SMP alternatives: 16k freed
[ 0.111047] ACPI: Core revision 20080321
[ 0.121833] ENABLING IO-APIC IRQs
[ 0.122144] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.162037] CPU0: Intel Celeron (Coppermine) stepping 0a
[ 0.164010] Brought up 1 CPUs
[ 0.164010] Total of 1 processors activated (1795.53 BogoMIPS).
[ 0.164010] CPU0 attaching sched-domain:
[ 0.164010] domain 0: span 0
[ 0.164010] groups: 0
[ 0.164010] net_namespace: 660 bytes
[ 0.164010] Booting paravirtualized kernel on bare hardware
[ 0.164010] NET: Registered protocol family 16
[ 0.164010] ACPI: bus type pci registered
[ 0.164808] PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=1
[ 0.164890] PCI: Using configuration type 1 for base access
[ 0.164977] Setting up standard PCI resources
[ 0.169598] ACPI: EC: Look up EC in DSDT
[ 0.181286] ACPI: Interpreter enabled
[ 0.181371] ACPI: (supports S0 S1 S4 S5)
[ 0.181591] ACPI: Using IOAPIC for interrupt routing
[ 0.199616] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.200219] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4
ACPI/GPIO/TCO
[ 0.200319] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
[ 0.201171] PCI: Transparent bridge - 0000:00:1e.0
[ 0.201287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.201665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.207501] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.208245] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12)
[ 0.208891] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0,
disabled.
[ 0.209630] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.210286] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.211731] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.212503] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.213160] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12)
[ 0.214092] ACPI: Power Resource [FDDP] (off)
[ 0.214262] ACPI: Power Resource [URP1] (off)
[ 0.214420] ACPI: Power Resource [URP2] (off)
[ 0.214577] ACPI: Power Resource [LPTP] (off)
[ 0.214953] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.215175] pnp: PnP ACPI init
[ 0.215280] ACPI: bus type pnp registered
[ 0.227629] pnp: PnP ACPI: found 13 devices
[ 0.227708] ACPI: ACPI bus type pnp unregistered
[ 0.227775] PnPBIOS: Disabled by ACPI PNP
[ 0.229163] PCI: Using ACPI for IRQ routing
[ 0.229850] ACPI: RTC can wake from S4
[ 0.230056] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.230131] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.230200] system 00:0c: iomem range 0x100000-0x1fefffff could not be
reserved
[ 0.230287] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.230356] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.262351] PCI: Bridge: 0000:00:1e.0
[ 0.262428] IO window: d000-dfff
[ 0.262492] MEM window: 0xff800000-0xff8fffff
[ 0.262556] PREFETCH window: 0x00000000f6a00000-0x00000000f6afffff
[ 0.262642] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.262742] NET: Registered protocol family 2
[ 0.263098] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.263828] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.264459] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.265228] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.265306] TCP reno registered
[ 0.265799] NET: Registered protocol family 1
[ 0.266202] checking if image is initramfs...<7>Switched to high resolution
mode on CPU 0
[ 0.906809] it is
[ 1.734894] Freeing initrd memory: 6031k freed
[ 1.737589] audit: initializing netlink socket (disabled)
[ 1.737709] type=2000 audit(1239873070.736:1): initialized
[ 1.738174] Total HugeTLB memory allocated, 0
[ 1.738541] VFS: Disk quotas dquot_6.5.1
[ 1.738700] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.738901] msgmni has been set to 1005
[ 1.739481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 1.739583] io scheduler noop registered
[ 1.739644] io scheduler anticipatory registered
[ 1.739705] io scheduler deadline registered
[ 1.739811] io scheduler cfq registered (default)
[ 1.739907] pci 0000:00:02.0: Boot video device
[ 1.739998] pci 0000:01:08.0: Firmware left e100 interrupts enabled;
disabling
[ 1.741645] isapnp: Scanning for PnP cards...
[ 2.100003] isapnp: No Plug & Play device found
[ 2.112219] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 2.112657] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.113041] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.114475] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.115113] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.122558] brd: module loaded
[ 2.123060] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 2.126341] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.126428] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.127199] mice: PS/2 mouse device common for all mice
[ 2.127845] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.127956] rtc0: alarms up to one month
[ 2.128303] cpuidle: using governor ladder
[ 2.128373] cpuidle: using governor menu
[ 2.128447] No iBFT detected.
[ 2.129733] TCP cubic registered
[ 2.129800] NET: Registered protocol family 17
[ 2.129872] Using IPI No-Shortcut mode
[ 2.130543] registered taskstats version 1
[ 2.130973] rtc_cmos 00:02: setting system clock to 2009-04-16 09:11:11 UTC
(1239873071)
[ 2.133506] Freeing unused kernel memory: 244k freed
[ 2.459463] ACPI: ACPI0007:00 is registered as cooling_device0
[ 3.400533] No dock devices found.
[ 3.583198] SCSI subsystem initialized
[ 3.875319] libata version 3.00 loaded.
[ 4.020072] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 4.020154] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.020317] ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 4.043873] e100: eth0: e100_probe: addr 0xff8ee000, irq 20, MAC addr
00:03:47:c3:70:81
[ 4.179125] Uniform Multi-Platform E-IDE driver
[ 4.179207] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 4.296224] ICH2: IDE controller (0x8086:0x244b rev 0x11) at PCI slot
0000:00:1f.1
[ 4.296352] ICH2: not 100% native mode: will probe irqs later
[ 4.296435] ide0: BM-DMA at 0xffa0-0xffa7
[ 4.296515] ide1: BM-DMA at 0xffa8-0xffaf
[ 4.296583] Probing IDE interface ide0...
[ 4.309449] usbcore: registered new interface driver usbfs
[ 4.309599] usbcore: registered new interface driver hub
[ 4.309828] usbcore: registered new device driver usb
[ 4.315856] USB Universal Host Controller Interface driver v3.0
[ 4.546533] Floppy drive(s): fd0 is 1.44M
[ 4.564593] FDC 0 is a post-1991 82077
[ 4.584216] hda: Maxtor 4D040H2, ATA DISK drive
[ 5.256161] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.256374] hda: UDMA/100 mode selected
[ 5.256675] Probing IDE interface ide1...
[ 6.025654] hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
[ 6.696165] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 6.696345] hdc: MWDMA2 mode selected
[ 6.696644] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.708836] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.708836] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) ->
IRQ 19
[ 6.708836] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 6.708836] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 6.716343] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus
number 1
[ 6.716501] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ef40
[ 6.716840] usb usb1: configuration #1 chosen from 1 choice
[ 6.717007] hub 1-0:1.0: USB hub found
[ 6.717096] hub 1-0:1.0: 2 ports detected
[ 6.796431] hda: max request size: 128KiB
[ 6.798699] hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63
[ 6.798853] hda: cache flushes not supported
[ 6.799053] hda: hda1 hda2 hda3 <<6>usb usb1: New USB device found,
idVendor=1d6b, idProduct=0001
[ 6.820730] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.820817] usb usb1: Product: UHCI Host Controller
[ 6.820878] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 6.820943] usb usb1: SerialNumber: 0000:00:1f.2
[ 6.821123] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) ->
IRQ 23
[ 6.821258] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 6.821268] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 6.821396] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus
number 2
[ 6.821538] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000ef80
[ 6.821883] usb usb2: configuration #1 chosen from 1 choice
[ 6.822039] hub 2-0:1.0: USB hub found
[ 6.822128] hub 2-0:1.0: 2 ports detected
[ 6.825370] hda5 hda6 hda7 >
[ 6.896193] hdc: ATAPI 52X CD-ROM drive, 128kB Cache
[ 6.896193] Uniform CD-ROM driver Revision: 3.20
[ 6.924480] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.924565] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.924649] usb usb2: Product: UHCI Host Controller
[ 6.924711] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 6.924774] usb usb2: SerialNumber: 0000:00:1f.4
[ 6.924957] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 6.925093] uhci_hcd 0000:01:09.0: UHCI Host Controller
[ 6.925224] uhci_hcd 0000:01:09.0: new USB bus registered, assigned bus
number 3
[ 6.925361] uhci_hcd 0000:01:09.0: irq 21, io base 0x0000df40
[ 6.925681] usb usb3: configuration #1 chosen from 1 choice
[ 6.925839] hub 3-0:1.0: USB hub found
[ 6.925922] hub 3-0:1.0: 2 ports detected
[ 7.028408] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.028497] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.028581] usb usb3: Product: UHCI Host Controller
[ 7.028643] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 7.028706] usb usb3: SerialNumber: 0000:01:09.0
[ 7.028897] ACPI: PCI Interrupt 0000:01:09.1[B] -> GSI 22 (level, low) ->
IRQ 22
[ 7.029035] uhci_hcd 0000:01:09.1: UHCI Host Controller
[ 7.029179] uhci_hcd 0000:01:09.1: new USB bus registered, assigned bus
number 4
[ 7.029325] uhci_hcd 0000:01:09.1: irq 22, io base 0x0000df80
[ 7.029684] usb usb4: configuration #1 chosen from 1 choice
[ 7.029840] hub 4-0:1.0: USB hub found
[ 7.029926] hub 4-0:1.0: 2 ports detected
[ 7.132364] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.132451] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.132536] usb usb4: Product: UHCI Host Controller
[ 7.132598] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 7.132662] usb usb4: SerialNumber: 0000:01:09.1
[ 7.132866] ACPI: PCI Interrupt 0000:01:09.2[C] -> GSI 23 (level, low) ->
IRQ 23
[ 7.133019] ehci_hcd 0000:01:09.2: EHCI Host Controller
[ 7.133177] ehci_hcd 0000:01:09.2: new USB bus registered, assigned bus
number 5
[ 7.133361] ehci_hcd 0000:01:09.2: irq 23, io mem 0xff8ef800
[ 7.164061] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 7.176057] ehci_hcd 0000:01:09.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 7.176410] usb usb5: configuration #1 chosen from 1 choice
[ 7.176563] hub 5-0:1.0: USB hub found
[ 7.176653] hub 5-0:1.0: 4 ports detected
[ 7.280369] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.280456] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.280540] usb usb5: Product: EHCI Host Controller
[ 7.280602] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 7.280666] usb usb5: SerialNumber: 0000:01:09.2
[ 7.326689] usb 2-2: configuration #1 chosen from 1 choice
[ 7.329606] hub 2-2:1.0: USB hub found
[ 7.331508] hub 2-2:1.0: 4 ports detected
[ 7.440442] usb 2-2: New USB device found, idVendor=0424, idProduct=0140
[ 7.440528] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.791623] PM: Starting manual resume from disk
[ 7.881772] kjournald starting. Commit interval 5 seconds
[ 7.881772] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.192075] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 8.326871] usb 5-1: configuration #1 chosen from 1 choice
[ 8.327480] usb 5-1: New USB device found, idVendor=0bc2, idProduct=0503
[ 8.327565] usb 5-1: New USB device strings: Mfr=42, Product=57,
SerialNumber=83
[ 8.327659] usb 5-1: Product: Seagate External Drive
[ 8.327728] usb 5-1: Manufacturer: Jabil Circuit
[ 8.327792] usb 5-1: SerialNumber: SG061120419
[ 8.533260] usb 2-2.3: new full speed USB device using uhci_hcd and address 3
[ 8.637189] usb 2-2.3: not running at top speed; connect to a high speed hub
[ 8.665170] usb 2-2.3: configuration #1 chosen from 1 choice
[ 8.669674] usb 2-2.3: New USB device found, idVendor=0ace, idProduct=1215
[ 8.669760] usb 2-2.3: New USB device strings: Mfr=16, Product=32,
SerialNumber=0
[ 8.669850] usb 2-2.3: Product: USB2.0 WLAN
[ 8.669913] usb 2-2.3: Manufacturer: ZyDAS
[ 10.496320] udevd version 125 started
[ 12.975845] Linux agpgart interface v0.103
[ 13.048561] agpgart: Detected an Intel i815 Chipset.
[ 13.061103] agpgart: AGP aperture is 64M @ 0xf8000000
[ 13.139499] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.201196] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.211134] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 13.211364] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by
hardware
[ 13.211480] iTCO_wdt: No card detected
[ 13.425295] intel_rng: Firmware space is locked read-only. If you can't or
[ 13.425302] intel_rng: don't want to disable this in firmware setup, and if
[ 13.425306] intel_rng: you are certain that your system has a functional
[ 13.425310] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 13.691470] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) ->
IRQ 17
[ 14.373754] input: Power Button (FF) as /class/input/input0
[ 14.384116] ACPI: Power Button (FF) [PWRF]
[ 14.384483] input: Power Button (CM) as /class/input/input1
[ 14.414255] ACPI: Power Button (CM) [PBTN]
[ 15.111615] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 17
[ 15.113129] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 15.732082] intel8x0_measure_ac97_clock: measured 55687 usecs
[ 15.732165] intel8x0: clocking to 41149
[ 15.861584] input: PC Speaker as /class/input/input2
[ 16.519061] ath_hal: module license 'Proprietary' taints kernel.
[ 16.629135] AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413,
RF2133, RF2425, RF2417)
[ 17.004180] Error: Driver 'pcspkr' is already registered, aborting...
[ 17.078049] ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 17.667266] MadWifi: ath_attach: Switching rfkill capability off.
[ 17.740521] Initializing USB Mass Storage driver...
[ 17.775826] scsi0 : SCSI emulation for USB Mass Storage devices
[ 17.777699] usbcore: registered new interface driver usb-storage
[ 17.777787] USB Mass Storage support registered.
[ 17.779009] usb-storage: device found at 2
[ 17.779024] usb-storage: waiting for device to settle before scanning
[ 17.922316] parport_pc 00:0a: reported by Plug and Play ACPI
[ 17.922437] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 18.835222] wifi0: Atheros AR2414 chip found (MAC 7.9, PHY 2112A 4.5, Radio
5.6)
[ 18.895383] ath_pci: wifi0: Atheros 5212: mem=0xff8f0000, irq=23
[ 19.951744] Adding 1461904k swap on /dev/hda2. Priority:-1 extents:1
across:1461904k
[ 20.554824] EXT3 FS on hda1, internal journal
[ 21.102218] loop: module loaded
[ 21.155229] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 21.330011] usb 2-2.3: reset full speed USB device using uhci_hcd and
address 3
[ 21.483922] ndiswrapper: driver zd1211bu (TP-LINK,06/25/2007,6.22.0.0) loaded
[ 22.670781] wlan0: ethernet device 00:1d:0f:bc:e7:96 using NDIS driver:
zd1211bu, version: 0x6160000, NDIS version: 0x501, vendor: '802.11 b+g Wireless
LAN', 0ACE:1215.F.conf
[ 22.744733] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2,
WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 22.744733] usbcore: registered new interface driver ndiswrapper
[ 22.784051] usb-storage: device scan complete
[ 22.793418] scsi 0:0:0:0: Direct-Access Seagate External Drive
PQ: 0 ANSI: 0
[ 23.124319] Driver 'sd' needs updating - please use bus_type methods
[ 23.131876] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 23.133157] sd 0:0:0:0: [sda] Write Protect is off
[ 23.133253] sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
[ 23.133261] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 23.134477] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 23.135591] sd 0:0:0:0: [sda] Write Protect is off
[ 23.135671] sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
[ 23.135692] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 23.135781] sda:<6>device-mapper: uevent: version 1.0.3
[ 23.157955] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
[email protected]
[ 23.830467] fuse init (API version 7.9)
[ 25.933115] ndiswrapper (mp_reset:64): wlan0 is being reset
[ 26.419559] NET: Registered protocol family 10
[ 26.527622] lo: Disabled Privacy Extensions
[ 27.043553] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.452907] RPC: Registered udp transport module.
[ 27.453001] RPC: Registered tcp transport module.
[ 27.780886] Installing knfsd (copyright (C) 1996 [email protected]).
[ 28.564060] sda1 sda2 sda3
[ 28.564691] sd 0:0:0:0: [sda] Attached SCSI disk
[ 37.227525] lp0: using parport0 (interrupt-driven).
[ 37.300251] ppdev: user-space parallel port driver
[ 41.606390] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 41.624450] NFSD: starting 90-second grace period
[ 46.022956] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 47.030338] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 47.337911] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 48.560337] Bridge firewalling registered
[ 48.574240] br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 48.618906] device eth0 entered promiscuous mode
[ 48.641492] device ath1 entered promiscuous mode
[ 48.709517] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.712209] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 48.720699] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 49.125881] br0: port 2(ath1) entering learning state
[ 49.125980] br0: port 1(eth0) entering learning state
[ 50.124016] br0: topology change detected, propagating
[ 50.124134] br0: port 2(ath1) entering forwarding state
[ 50.124203] br0: topology change detected, propagating
[ 50.124275] br0: port 1(eth0) entering forwarding state
[ 56.424016] wlan0: no IPv6 routers present
[ 59.240016] eth0: no IPv6 routers present
[ 59.572023] br0: no IPv6 routers present
[ 59.912021] ath1: no IPv6 routers present
Apr 16 10:17:07 oldman syslogd 1.5.0#5: restart.
Apr 16 10:17:07 oldman anacron[2864]: Job `cron.daily' terminated
Apr 16 10:17:07 oldman anacron[2864]: Normal exit (1 job run)
Apr 16 10:21:58 oldman hostapd: ath1: STA 00:12:f0:97:42:bc WPA: group key
handshake completed (WPA)
Apr 16 10:22:05 oldman fetchmail[2926]: awakened at Thu Apr 16 10:22:05 2009
Apr 16 10:22:05 oldman fetchmail[2926]: Server CommonName mismatch:
*.hosts.co.uk != pop3.apeironsports.com
Apr 16 10:22:05 oldman fetchmail[2926]: Server certificate verification error:
unable to get local issuer certificate
Apr 16 10:22:05 oldman fetchmail[2926]: Server certificate verification error:
certificate not trusted
Apr 16 10:22:05 oldman fetchmail[2926]: Server certificate verification error:
unable to verify the first certificate
Apr 16 10:22:07 oldman fetchmail[2926]: sleeping at Thu Apr 16 10:22:07 2009
for 300 seconds
Apr 16 10:25:49 oldman dovecot: imap-login: Login: user=<alex>, method=PLAIN,
rip=192.168.2.4, lip=192.168.2.1, TLS
Apr 16 10:27:07 oldman fetchmail[2926]: awakened at Thu Apr 16 10:27:07 2009
Apr 16 10:27:07 oldman fetchmail[2926]: Server CommonName mismatch:
*.hosts.co.uk != pop3.apeironsports.com
Apr 16 10:27:07 oldman fetchmail[2926]: Server certificate verification error:
unable to get local issuer certificate
Apr 16 10:27:07 oldman fetchmail[2926]: Server certificate verification error:
certificate not trusted
Apr 16 10:27:07 oldman fetchmail[2926]: Server certificate verification error:
unable to verify the first certificate
Apr 16 10:27:09 oldman fetchmail[2926]: sleeping at Thu Apr 16 10:27:09 2009
for 300 seconds
