Package: setserial
Version: 2.17-41
Severity: normal
Hi!
Maybe this is not a bug in setserial but in the 2.6.8 kernel:
setserial reports high values for close_delay and closing_wait.
When I try to change close_delay to 3000 with setserial, the is 30000,
with 300 I get 3000.
This is what I get from setserial with kernel 2.6.8:
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
Baud_base: 115200, close_delay: 5000, divisor: 0
closing_wait: 37856
Flags: spd_normal skip_test
With kernel 2.4.25 I got close_delay=50 and
closing_wait=3000.
Best regards
Oliver
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.8
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15)
Versions of packages setserial depends on:
ii debconf 1.4.30.13 Debian configuration management sy
ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries an
-- debconf information:
setserial/rc-boot-file-removed:
setserial/rc-boot-file-renamed:
setserial/update-modules-failed:
setserial/autosave: true
* setserial/autosave-types: autosave once
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
