Package: base
Version: 5.0
Every 4-5 minutes the wired network connection shuts down. After a couple of 
seconds it back on again. Log text:

May 25 19:22:23 Slejpner kernel: [ 3266.373370] ACPI: PCI Interrupt 
0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
May 25 19:22:23 Slejpner kernel: [ 3266.373370] iwl3945: Radio disabled by HW 
RF Kill switch
May 25 19:22:23 Slejpner kernel: [ 3266.373370] ACPI: PCI interrupt for device 
0000:10:00.0 disabled
May 25 19:22:23 Slejpner pppd[4761]: Modem hangup
May 25 19:22:23 Slejpner kernel: [ 3266.378069] eth0: late interrupt.
May 25 19:22:23 Slejpner kernel: [ 3266.380211] b44: eth0: powering down PHY
May 25 19:22:23 Slejpner pppd[4761]: Connect time 4.6 minutes.
May 25 19:22:23 Slejpner pppd[4761]: Sent 273611 bytes, received 1097617 bytes.
May 25 19:22:23 Slejpner pppd[4761]: Connection terminated.
May 25 19:22:23 Slejpner kernel: [ 3266.547179] ACPI: PCI Interrupt 
0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
May 25 19:22:23 Slejpner kernel: [ 3266.547179] iwl3945: Radio disabled by HW 
RF Kill switch
May 25 19:22:23 Slejpner kernel: [ 3266.547179] ACPI: PCI interrupt for device 
0000:10:00.0 disabled
May 25 19:22:23 Slejpner kernel: [ 3266.553069] ADDRCONF(NETDEV_UP): eth0: link 
is not ready
May 25 19:22:23 Slejpner kernel: [ 3266.662871] b44: eth0: powering down PHY
May 25 19:22:24 Slejpner kernel: [ 3267.870455] ADDRCONF(NETDEV_UP): eth0: link 
is not ready
May 25 19:22:28 Slejpner kernel: [ 3271.219899] b44: eth0: Link is up at 100 
Mbps, full duplex.
May 25 19:22:28 Slejpner kernel: [ 3271.219909] b44: eth0: Flow control is off 
for TX and off for RX.
May 25 19:22:28 Slejpner kernel: [ 3271.220250] ADDRCONF(NETDEV_CHANGE): eth0: 
link becomes ready
May 25 19:22:53 Slejpner pppd[4761]: PPP session is 3757
May 25 19:22:53 Slejpner pppd[4761]: Using interface ppp0
May 25 19:22:53 Slejpner pppd[4761]: Connect: ppp0 <--> eth0
May 25 19:22:53 Slejpner pppd[4761]: CHAP authentication succeeded
May 25 19:22:53 Slejpner pppd[4761]: CHAP authentication succeeded
May 25 19:22:53 Slejpner pppd[4761]: peer from calling number 00:90:1A:A0:F4:5A 
authorized
May 25 19:22:54 Slejpner pppd[4761]: local  IP address 78.54.111.171
May 25 19:22:54 Slejpner pppd[4761]: remote IP address 213.191.76.38
May 25 19:22:54 Slejpner pppd[4761]: primary   DNS address 213.191.74.19
May 25 19:22:54 Slejpner pppd[4761]: secondary DNS address 62.109.123.197

Other stuff that might help:

a...@slejpner:~$ uname -a
Linux Slejpner 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux
a...@slejpner:~$ 
a...@slejpner:~$ ls -l /lib/libc.so.6
lrwxrwxrwx 1 root root 11 16. Mai 00:36 /lib/libc.so.6 -> libc-2.7.so
a...@slejpner:~$ 
a...@slejpner:~$ dpkg -s libc6 | grep ^Version
Version: 2.7-18
a...@slejpner:~$ reportbug -q --template -T none -s none -S normal -b --list-cc 
none -q base
Detected character set: UTF-8
Please change your locale if this is incorrect.

Using 'Arne <[email protected]>' as your from address.
Getting status for base...
Will send report to Debian (per lsb_release).

Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Arne <[email protected]>
To: Debian Bug Tracking System <[email protected]>
Subject: none
X-Debbugs-Cc: [email protected], none

Package: base
Severity: normal



-- System Information:
Debian Release: 5.0
  APT prefers proposed-updates
  APT policy: (99, 'proposed-updates'), (99, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash


The system is running on a hp nx7400 laptop with 1 GB ram and 250 GB Samsung 
Harddisk.
No problems what soever while using Etch.

Good Luck & thank you very much !


__________________________________________________________________________
Verschicken Sie SMS direkt vom Postfach aus - in alle deutschen und viele 
ausländische Netze zum gleichen Preis! 
https://produkte.web.de/webde_sms/sms






--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]

Reply via email to