Package: linux-image-2.6.30-1-686 Version: 2.6.30-1 Severity: normal am using Debian 5.0 with 2.6.30 kernel. I see the following messages during kernel boot. Here is the relevant dmesg output:
[ 4.368333] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.368424] ata1.00: BMDMA stat 0x24 [ 4.368511] ata1.00: cmd c8/00:80:59:0d:4c/00:00:00:00:00/e2 tag 0 dma 65536 in [ 4.368515] res 51/84:00:d8:0d:4c/00:00:00:00:00/e2 Emask 0x10 (ATA bus error) [ 4.368715] ata1.00: status: { DRDY ERR } [ 4.368790] ata1.00: error: { ICRC ABRT } [ 4.368892] ata1: soft resetting link [ 4.553143] ata1.00: configured for UDMA/100 [ 4.553231] ata1: EH complete [ 4.567926] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.568024] ata1.00: BMDMA stat 0x24 [ 4.568119] ata1.00: cmd c8/00:80:59:0d:4c/00:00:00:00:00/e2 tag 0 dma 65536 in [ 4.568122] res 51/84:00:d8:0d:4c/00:00:00:00:00/e2 Emask 0x10 (ATA bus error) [ 4.568323] ata1.00: status: { DRDY ERR } [ 4.568398] ata1.00: error: { ICRC ABRT } [ 4.568493] ata1: soft resetting link [ 4.753342] ata1.00: configured for UDMA/100 [ 4.753427] ata1: EH complete and 3-4 more exact repetitions of the above messages. I just have a single IDE drive attached and the IDE driver that is loaded is: CONFIG_PATA_SCH. What does the above error message mean? Also I see these error messages on all the recent kernels - 2.6.26, 2.6.28, 2.6.29 and 2.6.30. Please let me know if you need output of additional things. -- Package-specific info: ** Version: Linux version 2.6.30-1-686 (Debian 2.6.30-1) (wa...@debian.org) (gcc version 4.3.3 (Debian 4.3.3-11) ) #1 SMP Sun Jun 14 16:11:32 UTC 2009 ** Command line: root=/dev/sda1 ro quiet ** Not tainted ** Kernel log: [ 4.759319] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.759387] ata1.00: BMDMA stat 0x24 [ 4.759456] ata1.00: cmd c8/00:20:9f:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in [ 4.759460] res 51/84:00:be:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 4.759589] ata1.00: status: { DRDY ERR } [ 4.759666] ata1.00: error: { ICRC ABRT } [ 4.759762] ata1: soft resetting link [ 4.928451] ata1.00: configured for UDMA/100 [ 4.928476] ata1: EH complete [ 4.933670] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.933758] ata1.00: BMDMA stat 0x24 [ 4.933846] ata1.00: cmd c8/00:20:9f:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in [ 4.933850] res 51/84:00:be:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 4.934052] ata1.00: status: { DRDY ERR } [ 4.934128] ata1.00: error: { ICRC ABRT } [ 4.934224] ata1: soft resetting link [ 5.104446] ata1.00: configured for UDMA/100 [ 5.104470] ata1: EH complete [ 5.108031] ata1.00: limiting speed to UDMA/66:PIO4 [ 5.108041] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 5.108139] ata1.00: BMDMA stat 0x24 [ 5.108227] ata1.00: cmd c8/00:20:9f:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in [ 5.108231] res 51/84:00:be:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 5.108433] ata1.00: status: { DRDY ERR } [ 5.108509] ata1.00: error: { ICRC ABRT } [ 5.108605] ata1: soft resetting link [ 5.280433] ata1.00: configured for UDMA/66 [ 5.280449] ata1: EH complete [ 5.304192] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 5.304280] ata1.00: BMDMA stat 0x24 [ 5.304368] ata1.00: cmd c8/00:20:bf:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in [ 5.304372] res 51/84:00:de:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 5.304574] ata1.00: status: { DRDY ERR } [ 5.304650] ata1.00: error: { ICRC ABRT } [ 5.304748] ata1: soft resetting link [ 5.476450] ata1.00: configured for UDMA/66 [ 5.476471] ata1: EH complete [ 5.481870] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 5.481958] ata1.00: BMDMA stat 0x24 [ 5.482045] ata1.00: cmd c8/00:20:bf:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in [ 5.482049] res 51/84:00:de:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 5.482251] ata1.00: status: { DRDY ERR } [ 5.482327] ata1.00: error: { ICRC ABRT } [ 5.482423] ata1: soft resetting link [ 5.652447] ata1.00: configured for UDMA/66 [ 5.652462] ata1: EH complete [ 5.656215] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 5.656299] ata1.00: BMDMA stat 0x24 [ 5.656386] ata1.00: cmd c8/00:20:bf:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in [ 5.656390] res 51/84:00:de:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 5.656591] ata1.00: status: { DRDY ERR } [ 5.656667] ata1.00: error: { ICRC ABRT } [ 5.656762] ata1: soft resetting link [ 5.828433] ata1.00: configured for UDMA/66 [ 5.828454] ata1: EH complete [ 5.830561] ata1.00: limiting speed to UDMA/33:PIO4 [ 5.830570] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 5.830656] ata1.00: BMDMA stat 0x24 [ 5.830743] ata1.00: cmd c8/00:20:bf:4a:56/00:00:00:00:00/e1 tag 0 dma 16384 in [ 5.830746] res 51/84:00:de:4a:56/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) [ 5.830948] ata1.00: status: { DRDY ERR } [ 5.831024] ata1.00: error: { ICRC ABRT } [ 5.831120] ata1: soft resetting link [ 6.000448] ata1.00: configured for UDMA/33 [ 6.000472] ata1: EH complete [ 7.490657] udevd version 125 started [ 9.583755] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 9.960379] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.119907] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.099935] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.100001] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.208329] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 12.208441] ACPI: Power Button [PWRF] [ 12.208460] ACPI Error (evxfevnt-0193): Could not enable PowerButton event [20090320] [ 12.208477] ACPI Warning (evxface-0146): Could not enable fixed event 2 [20090320] [ 12.233278] button: probe of LNXPWRBN:00 failed with error -22 [ 12.233505] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 [ 12.233620] ACPI: Power Button [PWRB] [ 12.386933] Marking TSC unstable due to TSC halts in idle [ 12.387255] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 12.387352] processor ACPI_CPU:00: registered as cooling_device0 [ 12.387369] ACPI: Processor [CPU0] (supports 8 throttling states) [ 12.388196] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 12.388265] processor ACPI_CPU:01: registered as cooling_device1 [ 12.388280] ACPI: Processor [CPU1] (supports 8 throttling states) [ 13.480584] udev: renamed network interface eth0 to eth1 [ 13.767830] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 13.777164] input: HDA Intel MID Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 13.777469] input: HDA Intel MID Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 13.777731] input: HDA Intel MID Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 13.777997] input: HDA Intel MID Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 13.778266] input: HDA Intel MID HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 15.760078] Clocksource tsc unstable (delta = -64379510 ns) [ 17.481459] EXT3 FS on sda1, internal journal [ 18.298677] loop: module loaded [ 20.098392] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 21.917006] e1000e: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 21.917098] 0000:03:00.0: eth1: 10/100 speed: disabling TSO [ 21.917335] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 32.636015] eth1: no IPv6 routers present ** Loaded modules: Module Size Used by loop 13316 0 snd_hda_codec_idt 49840 1 video 17980 0 output 2604 1 video psmouse 37528 0 processor 34476 2 button 5060 0 i2c_isch 3804 0 serio_raw 4556 0 i2c_core 20840 1 i2c_isch snd_hda_intel 22192 0 evdev 8028 0 snd_hda_codec 63520 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 6104 1 snd_hda_codec snd_pcm 62364 2 snd_hda_intel,snd_hda_codec snd_seq 42436 0 snd_timer 17436 2 snd_pcm,snd_seq snd_seq_device 6136 1 snd_seq shpchp 26648 0 pci_hotplug 24400 1 shpchp snd 49040 8 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device pcspkr 2104 0 soundcore 6184 1 snd snd_page_alloc 8180 2 snd_hda_intel,snd_pcm ext3 107180 1 jbd 41040 1 ext3 mbcache 6924 1 ext3 usbhid 31544 0 hid 34516 1 usbhid sd_mod 28748 2 crc_t10dif 1632 1 sd_mod ide_pci_generic 3632 0 ide_core 88100 1 ide_pci_generic ata_generic 4340 0 pata_sch 3184 1 e1000e 98352 0 libata 150624 2 ata_generic,pata_sch uhci_hcd 19140 0 ehci_hcd 29660 0 scsi_mod 131604 2 sd_mod,libata usbcore 125872 4 usbhid,uhci_hcd,ehci_hcd thermal 12572 0 fan 4040 0 thermal_sys 13128 4 video,processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH Poulsbo) [8086:8100] (rev 07) Subsystem: Intel Corporation Device [8086:8119] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:8119] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ec88 [size=8] Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=128M] Region 3: Memory at dfe60000 (32-bit, non-prefetchable) [size=128K] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] Vendor Specific Information <?> 00:1a.0 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB Client Controller [8086:8118] (rev 07) (prog-if 80 [Unspecified]) Subsystem: Intel Corporation Device [8086:8119] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at dfe5b000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller [8086:811b] (rev 07) Subsystem: Intel Corporation Device [8086:8119] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at dfe5c000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s Enabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 [8086:8110] (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-0000ffff Memory behind bridge: dff00000-dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <4us ClockPM+ Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 1, PowerLimit 10.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [90] Subsystem: Intel Corporation Device [8086:8119] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 [8086:8114] (rev 07) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:8119] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at eca0 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 [8086:8115] (rev 07) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:8119] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ecc0 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 [8086:8116] (rev 07) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:8119] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ece0 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 [8086:8117] (rev 07) (prog-if 20 [EHCI]) Subsystem: Intel Corporation Device [8086:8119] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at dfe5ac00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119] (rev 07) Subsystem: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: isch_smbus Kernel modules: i2c-isch 00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller [8086:811a] (rev 07) (prog-if 80 [Master]) Subsystem: Intel Corporation Device [8086:8119] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at ec90 [size=16] Kernel driver in use: pata_sch Kernel modules: pata_sch 01:00.0 PCI bridge [0604]: Texas Instruments Device [104c:8232] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=01, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: 0000f000-0000ffff Memory behind bridge: dff00000-dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0300c Data: 4161 Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000] Capabilities: [90] Express (v1) Upstream Port, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-SlotPowerLimit 0.000000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <16us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel modules: shpchp 02:00.0 PCI bridge [0604]: Texas Instruments Device [104c:8233] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-0000ffff Memory behind bridge: dff00000-dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0300c Data: 4169 Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000] Capabilities: [90] Express (v1) Downstream Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us ClockPM+ Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- Kernel modules: shpchp 02:01.0 PCI bridge [0604]: Texas Instruments Device [104c:8233] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0300c Data: 4171 Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000] Capabilities: [90] Express (v1) Downstream Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us ClockPM+ Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel modules: shpchp 02:02.0 PCI bridge [0604]: Texas Instruments Device [104c:8233] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Address: 00000000fee0300c Data: 4179 Capabilities: [80] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000] Capabilities: [90] Express (v1) Downstream Port (Slot-), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us ClockPM+ Suprise+ LLActRep+ BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel modules: shpchp 03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] Subsystem: Intel Corporation Device [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at dffc0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at dff00000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at fce0 [size=32] Region 3: Memory at dfff8000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at dff80000 [disabled] [size=256K] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=5 Vector table: BAR=3 offset=00000000 PBA: BAR=3 offset=00002000 Kernel driver in use: e1000e Kernel modules: e1000e -- System Information: Debian Release: 5.0.1 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.30-1-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.30-1-686 recommends: ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.30-1-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.30 <none> (no description available) -- debconf information: linux-image-2.6.30-1-686/preinst/lilo-has-ramdisk: shared/kernel-image/really-run-bootloader: true linux-image-2.6.30-1-686/postinst/old-initrd-link-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/create-kimage-link-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/depmod-error-2.6.30-1-686: false linux-image-2.6.30-1-686/postinst/old-system-map-link-2.6.30-1-686: true linux-image-2.6.30-1-686/prerm/would-invalidate-boot-loader-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/overwriting-modules-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/lilo-initrd-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/old-dir-initrd-link-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/failed-to-move-modules-2.6.30-1-686: linux-image-2.6.30-1-686/postinst/bootloader-test-error-2.6.30-1-686: linux-image-2.6.30-1-686/preinst/abort-install-2.6.30-1-686: linux-image-2.6.30-1-686/postinst/bootloader-error-2.6.30-1-686: linux-image-2.6.30-1-686/preinst/initrd-2.6.30-1-686: linux-image-2.6.30-1-686/prerm/removing-running-kernel-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/kimage-is-a-directory: linux-image-2.6.30-1-686/preinst/abort-overwrite-2.6.30-1-686: linux-image-2.6.30-1-686/preinst/elilo-initrd-2.6.30-1-686: true linux-image-2.6.30-1-686/preinst/bootloader-initrd-2.6.30-1-686: true linux-image-2.6.30-1-686/postinst/depmod-error-initrd-2.6.30-1-686: false -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org