Aioanei Rares wrote: > Jan Willem Stumpel wrote: >> Aioanei Rares wrote:
> I know about the average length of a dmesg, please send it in entirety. OK here it is; this was just after the first Iceweasel crash today. Nothing in dmesg about the crash, though. The last is a record of the printer being switched on.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-2-686 (Debian 2.6.30-8) (wa...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Sat Sep 26 01:16:22 UTC 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable) [ 0.000000] BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1ffb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping: 0000000000000000-000000001ffb0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001ffb0000 page 4k [ 0.000000] kernel direct mapping tables up to 1ffb0000 @ 10000-15000 [ 0.000000] RAMDISK: 03904000 - 03fff60c [ 0.000000] ACPI: RSDP 000fad80 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 1ffb0000 00030 (v01 A M I OEMRSDT 12000406 MSFT 00000097) [ 0.000000] ACPI: FACP 1ffb0200 00081 (v02 A M I OEMFACP 12000406 MSFT 00000097) [ 0.000000] ACPI: DSDT 1ffb03f0 0382D (v01 A0030 A0030009 00000009 INTL 02002026) [ 0.000000] ACPI: FACS 1ffc0000 00040 [ 0.000000] ACPI: APIC 1ffb0390 0005C (v01 A M I OEMAPIC 12000406 MSFT 00000097) [ 0.000000] ACPI: OEMB 1ffc0040 0003F (v01 A M I OEMBIOS 12000406 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ffb0000 [ 0.000000] low ram: 0 - 1ffb0000 [ 0.000000] node 0 low ram: 00000000 - 1ffb0000 [ 0.000000] node 0 bootmap 00011000 - 00014ff8 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ffb0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000541b10] TEXT DATA BSS ==> [0000100000 - 0000541b10] [ 0.000000] #4 [0003904000 - 0003fff60c] RAMDISK ==> [0003904000 - 0003fff60c] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [0000542000 - 000054422c] BRK ==> [0000542000 - 000054422c] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ffb0 [ 0.000000] HighMem 0x0001ffb0 -> 0x0001ffb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ffb0 [ 0.000000] On node 0 totalpages: 130879 [ 0.000000] free_area_init_node: node 0, pgdat c040bd40, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125904 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages at c1402000, static data 22172 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129855 [ 0.000000] Kernel command line: BOOT_IMAGE=linux.2.6.30.2 ro root=305 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:1280 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2799.148 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Initializing HighMem for node 0 (00000000:00000000) [ 0.004000] Memory: 507280k/523968k available (2173k kernel code, 16140k reserved, 1150k data, 320k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffe16000 - 0xfffff000 (1956 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xe07b0000 - 0xff7fe000 ( 496 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdffb0000 ( 511 MB) [ 0.004000] .init : 0xc0446000 - 0xc0496000 ( 320 kB) [ 0.004000] .data : 0xc031f73d - 0xc043f2f0 (1150 kB) [ 0.004000] .text : 0xc0100000 - 0xc031f73d (2173 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5598.29 BogoMIPS (lpj=11196592) [ 0.004147] Security Framework initialized [ 0.004193] SELinux: Disabled at boot. [ 0.004256] Mount-cache hash table entries: 512 [ 0.004443] Initializing cgroup subsys ns [ 0.004489] Initializing cgroup subsys cpuacct [ 0.004536] Initializing cgroup subsys devices [ 0.004581] Initializing cgroup subsys freezer [ 0.004625] Initializing cgroup subsys net_cls [ 0.004695] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004773] CPU: L2 cache: 1024K [ 0.004817] CPU: Physical Processor ID: 0 [ 0.004860] CPU: Processor Core ID: 0 [ 0.004905] Intel machine check architecture supported. [ 0.004955] Intel machine check reporting enabled on CPU#0. [ 0.005001] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available [ 0.005049] CPU0: Thermal monitoring enabled [ 0.005094] using mwait in idle threads. [ 0.005147] Checking 'hlt' instruction... OK. [ 0.021397] ACPI: Core revision 20090320 [ 0.030059] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.069799] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03 [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5597.62 BogoMIPS (lpj=11195256) [ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004000] CPU: L2 cache: 1024K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] Intel machine check architecture supported. [ 0.004000] Intel machine check reporting enabled on CPU#1. [ 0.004000] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available [ 0.004000] CPU1: Thermal monitoring enabled [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.156953] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03 [ 0.157564] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.160087] Brought up 2 CPUs [ 0.160134] Total of 2 processors activated (11195.92 BogoMIPS). [ 0.160221] CPU0 attaching sched-domain: [ 0.160226] domain 0: span 0-1 level SIBLING [ 0.160230] groups: 0 1 [ 0.160238] CPU1 attaching sched-domain: [ 0.160241] domain 0: span 0-1 level SIBLING [ 0.160244] groups: 1 0 [ 0.160333] net_namespace: 1088 bytes [ 0.160333] Booting paravirtualized kernel on bare hardware [ 0.160333] regulator: core version 0.5 [ 0.160333] NET: Registered protocol family 16 [ 0.160333] ACPI: bus type pci registered [ 0.160333] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.164006] PCI: Using configuration type 1 for base access [ 0.164094] bio: create slab <bio-0> at 0 [ 0.164680] ACPI: EC: Look up EC in DSDT [ 0.176243] ACPI: Interpreter enabled [ 0.176298] ACPI: (supports S0 S1 S3 S4 S5) [ 0.176533] ACPI: Using IOAPIC for interrupt routing [ 0.184700] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 2F, should be 20 [20090320] [ 0.184700] ACPI: No dock devices found. [ 0.184700] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.188042] pci 0000:00:00.0: reg 10 32bit mmio: [0xfc000000-0xfdffffff] [ 0.188191] pci 0000:00:1d.0: reg 20 io port: [0xef00-0xef1f] [ 0.188249] pci 0000:00:1d.1: reg 20 io port: [0xef20-0xef3f] [ 0.188308] pci 0000:00:1d.2: reg 20 io port: [0xef40-0xef5f] [ 0.188364] pci 0000:00:1d.3: reg 20 io port: [0xef80-0xef9f] [ 0.188431] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff] [ 0.188493] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.188542] pci 0000:00:1d.7: PME# disabled [ 0.188679] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.188688] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.188743] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO [ 0.188813] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.188822] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.188830] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.188838] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.188846] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.188855] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.188911] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.188961] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe8ff] [ 0.188970] pci 0000:00:1f.5: reg 14 io port: [0xee80-0xeebf] [ 0.188978] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfebff800-0xfebff9ff] [ 0.188987] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfebff400-0xfebff4ff] [ 0.189018] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.189714] pci 0000:00:1f.5: PME# disabled [ 0.189714] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.189714] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.189714] pci 0000:01:00.0: reg 18 32bit mmio: [0xfe9f0000-0xfe9fffff] [ 0.189714] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff] [ 0.189714] pci 0000:01:00.0: supports D1 D2 [ 0.189714] pci 0000:01:00.1: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.189714] pci 0000:01:00.1: reg 14 32bit mmio: [0xfe9e0000-0xfe9effff] [ 0.189714] pci 0000:01:00.1: supports D1 D2 [ 0.189714] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.189714] pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.189714] pci 0000:00:01.0: bridge 32bit mmio pref: [0xdbf00000-0xfbefffff] [ 0.189714] pci 0000:02:03.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff] [ 0.189714] pci 0000:02:03.0: reg 14 io port: [0xdc00-0xdc7f] [ 0.189714] pci 0000:02:03.0: supports D2 [ 0.189714] pci 0000:02:03.0: PME# supported from D2 D3hot D3cold [ 0.189714] pci 0000:02:03.0: PME# disabled [ 0.189714] pci 0000:02:04.0: reg 10 io port: [0xdf00-0xdf3f] [ 0.189714] pci 0000:02:04.0: reg 14 io port: [0xdfa0-0xdfaf] [ 0.189714] pci 0000:02:04.0: reg 18 io port: [0xd880-0xd8ff] [ 0.189714] pci 0000:02:04.0: reg 1c 32bit mmio: [0xfeafe000-0xfeafefff] [ 0.189714] pci 0000:02:04.0: reg 20 32bit mmio: [0xfeac0000-0xfeadffff] [ 0.189714] pci 0000:02:04.0: supports D1 [ 0.189714] pci 0000:02:05.0: reg 10 32bit mmio: [0xfeaf8000-0xfeafbfff] [ 0.189714] pci 0000:02:05.0: reg 14 io port: [0xd400-0xd4ff] [ 0.189714] pci 0000:02:05.0: reg 30 32bit mmio: [0xfeaa0000-0xfeabffff] [ 0.189714] pci 0000:02:05.0: supports D1 D2 [ 0.189714] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.189714] pci 0000:02:05.0: PME# disabled [ 0.189714] pci 0000:00:1e.0: transparent bridge [ 0.189714] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.189714] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.189714] pci_bus 0000:00: on NUMA node 0 [ 0.189714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.189714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.196622] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.196703] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.197271] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.197838] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.200207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.200769] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.201402] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.201964] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.204120] PCI: Using ACPI for IRQ routing [ 0.220108] hpet clockevent registered [ 0.220113] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.220168] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.220344] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.245738] pnp: PnP ACPI init [ 0.245792] ACPI: bus type pnp registered [ 0.252470] pnp: PnP ACPI: found 15 devices [ 0.252517] ACPI: ACPI bus type pnp unregistered [ 0.252564] ASUS P4P800 detected. Disabling PnPBIOS [ 0.252609] PnPBIOS: Disabled [ 0.252669] system 00:0b: ioport range 0x680-0x6ff has been reserved [ 0.252717] system 00:0b: ioport range 0x290-0x297 has been reserved [ 0.252769] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved [ 0.252817] system 00:0c: ioport range 0x800-0x87f has been reserved [ 0.252864] system 00:0c: ioport range 0x480-0x4bf has been reserved [ 0.252913] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.252961] system 00:0c: iomem range 0xffb00000-0xffbfffff could not be reserved [ 0.253020] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.253075] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.253128] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.253176] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved [ 0.253224] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.253272] system 00:0e: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.253326] system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved [ 0.288612] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.288660] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.288709] pci 0000:00:01.0: MEM window: 0xfe900000-0xfe9fffff [ 0.288757] pci 0000:00:01.0: PREFETCH window: 0x000000dbf00000-0x000000fbefffff [ 0.288816] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.288864] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.288912] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff [ 0.288961] pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x000000300fffff [ 0.289030] pci 0000:00:1e.0: setting latency timer to 64 [ 0.289037] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.289041] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.289045] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.289049] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff] [ 0.289053] pci_bus 0000:01: resource 2 pref mem [0xdbf00000-0xfbefffff] [ 0.289058] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.289061] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.289065] pci_bus 0000:02: resource 2 pref mem [0x30000000-0x300fffff] [ 0.289069] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.289073] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.289148] NET: Registered protocol family 2 [ 0.333825] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.334300] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.334420] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.334532] TCP: Hash tables configured (established 16384 bind 16384) [ 0.334579] TCP reno registered [ 0.345813] NET: Registered protocol family 1 [ 0.345929] Trying to unpack rootfs image as initramfs... [ 0.612928] Freeing initrd memory: 7149k freed [ 0.618763] audit: initializing netlink socket (disabled) [ 0.618828] type=2000 audit(1255507237.615:1): initialized [ 0.619108] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.619274] VFS: Disk quotas dquot_6.5.2 [ 0.619365] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.619474] msgmni has been set to 1004 [ 0.619760] alg: No test for stdrng (krng) [ 0.619887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.619943] io scheduler noop registered [ 0.619990] io scheduler anticipatory registered [ 0.620035] io scheduler deadline registered [ 0.620096] io scheduler cfq registered (default) [ 0.620240] pci 0000:01:00.0: Boot video device [ 0.620826] isapnp: Scanning for PnP cards... [ 0.721672] Switched to high resolution mode on CPU 1 [ 0.723940] Switched to high resolution mode on CPU 0 [ 0.974529] isapnp: No Plug & Play device found [ 0.979294] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.979484] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.979664] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.980289] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.980560] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.983473] brd: module loaded [ 0.983679] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.986490] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.986544] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.986833] mice: PS/2 mouse device common for all mice [ 0.986981] rtc_cmos 00:02: RTC can wake from S4 [ 0.987111] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.987181] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.987284] cpuidle: using governor ladder [ 0.987330] cpuidle: using governor menu [ 0.987377] No iBFT detected. [ 0.987952] TCP cubic registered [ 0.988058] NET: Registered protocol family 10 [ 0.988805] lo: Disabled Privacy Extensions [ 0.989425] Mobile IPv6 [ 0.989470] NET: Registered protocol family 17 [ 0.989521] Using IPI No-Shortcut mode [ 0.989792] registered taskstats version 1 [ 0.990006] rtc_cmos 00:02: setting system clock to 2009-10-14 08:00:39 UTC (1255507239) [ 0.990119] Freeing unused kernel memory: 320k freed [ 0.990400] Write protecting the kernel text: 2176k [ 0.990469] Write protecting the kernel read-only data: 784k [ 1.012104] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.205859] Linux agpgart interface v0.103 [ 1.257191] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 1.259253] agpgart-intel 0000:00:00.0: AGP aperture is 32M @ 0xfc000000 [ 1.262213] skge 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.262329] skge 1.13 addr 0xfeaf8000 irq 22 chip Yukon-Lite rev 9 [ 1.263744] skge eth0: addr 00:11:d8:95:8c:a1 [ 1.296875] usbcore: registered new interface driver usbfs [ 1.296976] usbcore: registered new interface driver hub [ 1.297105] usbcore: registered new device driver usb [ 1.300072] SCSI subsystem initialized [ 1.303504] Floppy drive(s): fd0 is 1.44M [ 1.330306] Uniform Multi-Platform E-IDE driver [ 1.348081] FDC 0 is a post-1991 82077 [ 1.352398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.352500] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.352575] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.352583] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.352704] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.356683] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.356740] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 1.356767] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00 [ 1.369028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.369120] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.369172] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.369230] usb usb1: Product: EHCI Host Controller [ 1.369278] usb usb1: Manufacturer: Linux 2.6.30-2-686 ehci_hcd [ 1.369327] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.369491] usb usb1: configuration #1 chosen from 1 choice [ 1.369597] hub 1-0:1.0: USB hub found [ 1.369653] hub 1-0:1.0: 8 ports detected [ 1.412306] firewire_ohci 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.413913] udev: renamed network interface eth0 to eth2 [ 1.414185] piix 0000:00:1f.1: IDE controller (0x8086:0x24db rev 0x02) [ 1.414252] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.414317] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.414396] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 1.414453] ide0: BM-DMA at 0xfc00-0xfc07 [ 1.414510] ide1: BM-DMA at 0xfc08-0xfc0f [ 1.414564] Probing IDE interface ide0... [ 1.418051] libata version 3.00 loaded. [ 1.434837] uhci_hcd: USB Universal Host Controller Interface driver [ 1.497013] firewire_ohci: Added fw-ohci device 0000:02:03.0, OHCI version 1.0 [ 1.497106] sata_promise 0000:02:04.0: version 2.12 [ 1.497130] sata_promise 0000:02:04.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.516106] scsi0 : sata_promise [ 1.516370] scsi1 : sata_promise [ 1.516560] scsi2 : sata_promise [ 1.516663] ata1: SATA max UDMA/133 mmio m4...@0xfeafe000 ata 0xfeafe200 irq 23 [ 1.516719] ata2: SATA max UDMA/133 mmio m4...@0xfeafe000 ata 0xfeafe280 irq 23 [ 1.516772] ata3: PATA max UDMA/133 mmio m4...@0xfeafe000 ata 0xfeafe300 irq 23 [ 1.701155] hda: WDC WD1200JB-00CRA1, ATA DISK drive [ 1.836026] ata1: SATA link down (SStatus 0 SControl 300) [ 1.996101] firewire_core: created device fw0: GUID 0011d8000013407c, S400 [ 2.157025] ata2: SATA link down (SStatus 0 SControl 300) [ 2.372062] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.373067] hda: UDMA/100 mode selected [ 2.374141] Probing IDE interface ide1... [ 3.109154] hdc: PLEXTOR DVD-ROM PX-116A2 0100, ATAPI CD/DVD-ROM drive [ 3.949009] hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive [ 3.949168] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.949322] hdc: host side 80-wire cable detection failed, limiting max speed to UDMA33 [ 3.949377] hdc: UDMA/33 mode selected [ 3.949585] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.950377] hdd: UDMA/33 mode selected [ 3.950868] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.978530] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.984057] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.984123] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.984131] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.984234] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.985041] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00 [ 3.985152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.985204] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.985261] usb usb2: Product: UHCI Host Controller [ 3.985309] usb usb2: Manufacturer: Linux 2.6.30-2-686 uhci_hcd [ 3.985358] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.985530] usb usb2: configuration #1 chosen from 1 choice [ 3.985637] hub 2-0:1.0: USB hub found [ 3.985693] hub 2-0:1.0: 2 ports detected [ 3.985943] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.986001] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.986007] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.986093] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.986181] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20 [ 3.986280] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.986332] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.986389] usb usb3: Product: UHCI Host Controller [ 3.986437] usb usb3: Manufacturer: Linux 2.6.30-2-686 uhci_hcd [ 3.986486] usb usb3: SerialNumber: 0000:00:1d.1 [ 3.986622] usb usb3: configuration #1 chosen from 1 choice [ 3.986727] hub 3-0:1.0: USB hub found [ 3.986782] hub 3-0:1.0: 2 ports detected [ 3.986994] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.987051] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.987057] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.987142] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.987233] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40 [ 3.987332] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.987384] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.987441] usb usb4: Product: UHCI Host Controller [ 3.987489] usb usb4: Manufacturer: Linux 2.6.30-2-686 uhci_hcd [ 3.987538] usb usb4: SerialNumber: 0000:00:1d.2 [ 3.987674] usb usb4: configuration #1 chosen from 1 choice [ 3.987773] hub 4-0:1.0: USB hub found [ 3.987828] hub 4-0:1.0: 2 ports detected [ 3.988047] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.988104] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.988110] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.988196] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.988278] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80 [ 3.988381] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.988435] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.988496] usb usb5: Product: UHCI Host Controller [ 3.988545] usb usb5: Manufacturer: Linux 2.6.30-2-686 uhci_hcd [ 3.988596] usb usb5: SerialNumber: 0000:00:1d.3 [ 3.988748] usb usb5: configuration #1 chosen from 1 choice [ 3.988859] hub 5-0:1.0: USB hub found [ 3.988918] hub 5-0:1.0: 2 ports detected [ 4.007031] ide-cd driver 5.00 [ 4.008264] ide-cd: hdc: ATAPI 48X DVD-ROM drive, 256kB Cache [ 4.008462] Uniform CD-ROM driver Revision: 3.20 [ 4.017406] ide-gd driver 1.18 [ 4.017509] hda: max request size: 128KiB [ 4.018600] hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63 [ 4.018735] hda: cache flushes not supported [ 4.018862] hda: hda1 hda2 <<6>ide-cd: hdd: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 4.030943] hda5 hda6 hda7 > [ 4.662644] PM: Starting manual resume from disk [ 4.690991] kjournald starting. Commit interval 5 seconds [ 4.691150] EXT3-fs: mounted filesystem with ordered data mode. [ 6.943673] udev: starting version 146 [ 7.493214] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 7.512087] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 7.512228] ACPI: Power Button [PWRF] [ 7.512430] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 7.512546] ACPI: Power Button [PWRB] [ 7.523717] processor ACPI_CPU:00: registered as cooling_device0 [ 7.523837] processor ACPI_CPU:01: registered as cooling_device1 [ 7.575966] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.587770] intel_rng: FWH not detected [ 7.632956] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.656800] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.932931] parport_pc 00:0a: reported by Plug and Play ACPI [ 7.933090] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 8.240830] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 9.575235] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9.575329] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 9.896029] intel8x0_measure_ac97_clock: measured 54539 usecs (2629 samples) [ 9.896083] intel8x0: clocking to 48000 [ 10.972971] Adding 979924k swap on /dev/hda7. Priority:-1 extents:1 across:979924k [ 11.382766] EXT3 FS on hda5, internal journal [ 11.863511] w83627hf: Found W83627THF chip at 0x290 [ 11.863643] w83627hf w83627hf.656: Reading VID from GPIO5 [ 11.919090] device-mapper: uevent: version 1.0.3 [ 11.919504] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-de...@redhat.com [ 12.301298] fuse init (API version 7.11) [ 12.526426] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 13.684651] skge eth2: enabling interface [ 13.688050] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 14.127700] RPC: Registered udp transport module. [ 14.127756] RPC: Registered tcp transport module. [ 14.216167] Slow work thread pool: Starting up [ 14.216471] Slow work thread pool: Ready [ 14.216569] FS-Cache: Loaded [ 14.311567] FS-Cache: Netfs 'nfs' registered for caching [ 14.396618] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 15.371341] skge eth2: Link is up at 100 Mbps, full duplex, flow control both [ 15.371429] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 15.666308] svc: failed to register lockdv1 RPC service (errno 97). [ 25.512006] eth2: no IPv6 routers present [ 25.976803] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 25.992470] NFSD: starting 90-second grace period [ 44.157037] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 44.320086] [drm] Initialized drm 1.1.0 20060810 [ 44.348478] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 [ 44.600873] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 44.600897] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 44.600940] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 44.843441] [drm] Setting GART location based on new memory map [ 44.843500] [drm] Loading R200 Microcode [ 44.843504] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 44.883341] radeon_cp: Failed to load firmware "radeon/R200_cp.bin" [ 44.883347] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [10642.308062] usb 5-1: new full speed USB device using uhci_hcd and address 2 [10642.516890] usb 5-1: New USB device found, idVendor=04f9, idProduct=0027 [10642.516898] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [10642.516902] usb 5-1: Product: HL-2030 series [10642.516905] usb 5-1: Manufacturer: Brother [10642.516908] usb 5-1: SerialNumber: H5J504293 [10642.517035] usb 5-1: configuration #1 chosen from 1 choice [10643.416664] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027 [10643.416691] usbcore: registered new interface driver usblp