Package: linux-image-2.6.26-2-686 Version: 2.6.26-19lenny2 Severity: normal
Hello, I upgraded from (I think) 2.6.26-19lenny1 to 2.6.26-19lenny2 with the latest security update and I found my system would hang during the boot. By 'hang' I mean that the boot process seems to stop -- no further messages on the console and the network never came up. The system would not respond to ctrl-alt-del but does respond to the <alt>-<sysrq>-cmd keys. The last messages on the console before hang were: ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. I tried various combinations of things like "probe_mask=0x3f" and "ide.probe_mask=0x3f" and "probe_mask=0x00" and "probe_mask=0x30" on the kernel command line and nothing helped. I also moved the hd to a different box (the one I'm reporting this on now) and got the same behavior. (Both before and afger rebuilding the initramfs.) The grub stanza that causes the hang reads: title Debian GNU/Linux, kernel 2.6.26-2-686 root (hd0,0) kernel /vmlinuz-2.6.26-2-686 root=/dev/mapper/vg00-root ro console=tty0 console=ttyS0,9600n8 initrd /initrd.img-2.6.26-2-686 The system boots successfully after changing this to: title Debian GNU/Linux, kernel 2.6.26-2-686 root (hd0,0) kernel /vmlinuz-2.6.26-2-686 root=/dev/mapper/vg00-root ro initrd /initrd.img-2.6.26-2-686 (But then of course I don't have a serial console, afaict.) -- Package-specific info: ** Version: Linux version 2.6.26-2-686 (Debian 2.6.26-19lenny2) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Nov 4 20:45:37 UTC 2009 ** Command line: root=/dev/mapper/vg00-root ro ** Not tainted ** Kernel log: [ 4.316922] ide0: BM-DMA at 0xffa0-0xffa7 [ 4.316987] ide1: BM-DMA at 0xffa8-0xffaf [ 4.317044] Probing IDE interface ide0... [ 4.620228] hda: WDC WD3000JB-00KFA0, ATA DISK drive [ 5.100921] Floppy drive(s): fd0 is 1.44M [ 5.118551] FDC 0 is a National Semiconductor PC87306 [ 5.292172] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 5.292264] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 [ 5.292339] hda: UDMA/33 mode selected [ 5.292483] Probing IDE interface ide1... [ 6.028165] hdc: CRD-8482B, ATAPI CD/DVD-ROM drive [ 6.700146] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.700259] hdc: Disabling (U)DMA for CRD-8482B (blacklisted) [ 6.700327] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 6.700449] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 6.700583] ide1 at 0x170-0x177,0x376 on irq 15 [ 6.701727] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 6.701788] PCI: setting IRQ 10 as level-triggered [ 6.701797] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 6.701944] 3c59x: Donald Becker and others. [ 6.702002] 0000:02:08.0: 3Com PCI 3c905C Tornado at d0814c00. [ 6.724852] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 6.724911] PCI: setting IRQ 5 as level-triggered [ 6.724919] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 6.725070] 0000:02:0c.0: 3Com PCI 3c905C Tornado at d0816800. [ 6.756588] No dock devices found. [ 6.803585] SCSI subsystem initialized [ 6.860416] libata version 3.00 loaded. [ 6.966478] hda: max request size: 512KiB [ 6.984508] hda: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63 [ 6.984791] hda: cache flushes supported [ 6.984959] hda: hda1 hda2 < hda5 > [ 6.998812] hdc: ATAPI 48X CD-ROM drive, 128kB Cache [ 6.999008] Uniform CD-ROM driver Revision: 3.20 [ 7.329486] device-mapper: uevent: version 1.0.3 [ 7.331621] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com [ 8.154160] PM: Starting manual resume from disk [ 8.259325] kjournald starting. Commit interval 5 seconds [ 8.259423] EXT3-fs: mounted filesystem with ordered data mode. [ 9.974139] udevd version 125 started [ 11.175621] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 13.005477] input: PC Speaker as /class/input/input1 [ 13.854698] Linux agpgart interface v0.103 [ 13.960540] agpgart: Detected an Intel i820 Chipset. [ 13.966651] agpgart: AGP aperture is 64M @ 0xf4000000 [ 14.060450] Intel 82802 RNG detected [ 14.232256] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 14.260799] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.830640] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 14.937481] Error: Driver 'pcspkr' is already registered, aborting... [ 15.957075] parport_pc 00:0b: reported by Plug and Play ACPI [ 15.957238] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 16.107301] input: Power Button (FF) as /class/input/input2 [ 16.135003] ACPI: Power Button (FF) [PWRF] [ 19.580472] EXT3 FS on dm-0, internal journal [ 20.280743] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 20.280833] ide_generic: I/O resource 0x1F0-0x1F7 not free. [ 20.280890] ide_generic: I/O resource 0x170-0x177 not free. [ 23.008707] kjournald starting. Commit interval 5 seconds [ 23.009016] EXT3 FS on hda1, internal journal [ 23.009108] EXT3-fs: mounted filesystem with ordered data mode. [ 23.050546] kjournald starting. Commit interval 5 seconds [ 23.050546] EXT3 FS on dm-4, internal journal [ 23.050546] EXT3-fs: mounted filesystem with ordered data mode. [ 23.100272] kjournald starting. Commit interval 5 seconds [ 23.100272] EXT3 FS on dm-7, internal journal [ 23.100272] EXT3-fs: mounted filesystem with ordered data mode. [ 23.144248] kjournald starting. Commit interval 5 seconds [ 23.144248] EXT3 FS on dm-6, internal journal [ 23.144248] EXT3-fs: mounted filesystem with ordered data mode. [ 23.170887] kjournald starting. Commit interval 5 seconds [ 23.170887] EXT3 FS on dm-9, internal journal [ 23.170887] EXT3-fs: mounted filesystem with ordered data mode. [ 23.205124] kjournald starting. Commit interval 5 seconds [ 23.205124] EXT3 FS on dm-5, internal journal [ 23.205124] EXT3-fs: mounted filesystem with ordered data mode. [ 23.232014] kjournald starting. Commit interval 5 seconds [ 23.232014] EXT3 FS on dm-2, internal journal [ 23.232014] EXT3-fs: mounted filesystem with ordered data mode. [ 23.267773] kjournald starting. Commit interval 5 seconds [ 23.268359] EXT3 FS on dm-8, internal journal [ 23.268451] EXT3-fs: mounted filesystem with ordered data mode. [ 23.308014] kjournald starting. Commit interval 5 seconds [ 23.312228] EXT3 FS on dm-10, internal journal [ 23.312319] EXT3-fs: mounted filesystem with ordered data mode. [ 23.344013] kjournald starting. Commit interval 5 seconds [ 23.344013] EXT3 FS on dm-3, internal journal [ 23.344013] EXT3-fs: mounted filesystem with ordered data mode. [ 23.376342] kjournald starting. Commit interval 5 seconds [ 23.376342] EXT3 FS on dm-11, internal journal [ 23.376342] EXT3-fs: mounted filesystem with ordered data mode. [ 23.495376] Adding 409592k swap on /dev/mapper/vg00-swap. Priority:-1 extents:1 across:409592k [ 25.127370] NET: Registered protocol family 10 [ 25.129075] lo: Disabled Privacy Extensions [ 25.243007] eth0: setting half-duplex. [ 25.243313] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 92.196012] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 118.240600] eth0: setting full-duplex. [ 118.241205] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 128.936036] eth0: no IPv6 routers present ** Loaded modules: Module Size Used by speedstep_lib 4516 0 cpufreq_powersave 1856 0 cpufreq_userspace 3172 0 cpufreq_stats 3776 0 cpufreq_ondemand 6476 0 freq_table 4224 2 cpufreq_stats,cpufreq_ondemand cpufreq_conservative 5960 0 ipv6 235396 22 ide_generic 2464 0 [permanent] button 6096 0 parport_pc 22500 0 parport 30988 1 parport_pc serio_raw 4740 0 i2c_i801 7920 0 psmouse 32336 0 snd_pcm 62660 0 snd_timer 17800 1 snd_pcm i2c_core 19828 1 i2c_i801 shpchp 25528 0 pci_hotplug 23460 1 shpchp snd 45636 2 snd_pcm,snd_timer soundcore 6368 1 snd intel_rng 4576 0 rng_core 3940 1 intel_rng snd_page_alloc 7816 1 snd_pcm intel_agp 22524 1 agpgart 28808 1 intel_agp pcspkr 2432 0 evdev 8000 2 dcdbas 6272 0 ext3 105576 12 jbd 39476 1 ext3 mbcache 7108 1 ext3 dm_mirror 15136 0 dm_log 8452 1 dm_mirror dm_snapshot 14340 0 dm_mod 46216 29 dm_mirror,dm_log,dm_snapshot ide_cd_mod 27684 0 cdrom 30176 1 ide_cd_mod ide_disk 10496 3 ata_generic 4676 0 libata 140448 1 ata_generic scsi_mod 129548 1 libata dock 8304 1 libata floppy 47716 0 3c59x 35624 0 mii 4896 1 3c59x piix 6568 0 [permanent] ide_pci_generic 3908 0 [permanent] ide_core 96168 5 ide_generic,ide_cd_mod,ide_disk,piix,ide_pci_generic thermal 15228 0 processor 32576 1 thermal fan 4196 0 thermal_sys 10856 3 thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82820 820 (Camino) Chipset Host Bridge (MCH) [8086:2501] (rev 03) Subsystem: Dell Device [1028:0093] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation 82820 820 (Camino) Chipset AGP Bridge [8086:250f] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Memory behind bridge: fd000000-feffffff Prefetchable memory behind bridge: f8000000-f9ffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fb000000-fcffffff Prefetchable memory behind bridge: 20000000-200fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC) [8086:2410] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE Controller [8086:2411] (rev 02) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801AA IDE Controller [8086:2411] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus Controller [8086:2413] (rev 02) Subsystem: Intel Corporation 82801AA SMBus Controller [8086:2413] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at dcd0 [size=16] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 01:00.0 VGA compatible controller [0300]: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] [10de:002d] (rev 15) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:0093] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 9 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at f8000000 (32-bit, prefetchable) [size=32M] [virtual] Expansion ROM at fe000000 [disabled] [size=64K] Capabilities: <access denied> Kernel modules: nvidiafb 02:08.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78) Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC [10b7:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at ec80 [size=128] Region 1: Memory at fbfffc00 (32-bit, non-prefetchable) [size=128] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x Kernel modules: 3c59x 02:0c.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78) Subsystem: Dell Device [1028:0093] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at ec00 [size=128] Region 1: Memory at fbfff800 (32-bit, non-prefetchable) [size=128] Expansion ROM at 20020000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x Kernel modules: 3c59x -- System Information: Debian Release: 5.0.3 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-2-686 recommends: ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-2-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686: shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/kimage-is-a-directory: linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org