On Thu, Jul 28, 2005 at 02:19:34PM -0600, Daniel Hearn wrote: > Package: installation-reports > > Debian-installer-version: <latest etch net-install cd image, 7/20/05> > uname -a: <n/a> > Date: <Jul 28 12:30> > Method: <I did a network install, download a minimal cd image. Not proxied> > > Machine: <> > Processor: AMD XP 2700 > Memory: 1GB > Root Device: <SCSI /dev/sda1> > Root Size/partition table: <I attempted to make 3 partitions: boot, swap, > root> > Output of lspci and lspci -n: n/a > > Base System Installation Checklist: > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > > Initial boot worked: [O] > Configure network HW: [O] > Config network: [O] > Detect CD: [O] > Load installer modules: [O] > Detect hard drives: [E] > Partition hard drives: [E] > Create file systems: [O] > Mount partitions: [O] > Install base system: [O] > Install boot loader: [O] > Reboot: [E] > > Comments/Problems: > > <I have two 80GB Maxtor Serial ATA drives. They were striped. In BIOS, it > appears to be a 160GB Drive. > The installer picked them up as two separate drives. I went ahead and > partitioned the first one without > a problem. I went on with the install, installed GRUB to the MBR, and > rebooted the machine. It hangs on > a blank screen after the reboot. For variation, I will attempt to mirror > the drives ...SATA chipset is > Promise FastTrack 20378 I mirrored the drives and redid the install, it > seems to work only if the boot loader is installed on another IDE drive I > have, not on the SATA drives.>
dmraid is not supported yet. Use a hardware raid controller, or stick to linux software raid. Proprietary software raid doesn't work yet (maybe when dmraid is ever stable, should that ever happen). Last install I did, did not support 20378 card, but the netinst image I made with 2.6.12 on it did work fine when I tested it on the 20378 a few days ago. I never did check if 2.6.8 supports the 20378 or not. Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]