Twas brillig at 14:41:10 07.03.2010 UTC+00 when t...@cyrius.com did gyre and gimble:
>> Just tested it. Works fine here (mDNS resolves without promisc mode >> on interface), thanks. MM> Good to hear! That patch also included some debugging output. Can MM> you please send the output from "dmesg"? Attached. [looking at dmesg: wow, looks like I just found wireless card I lost some time ago - it's mini-PCI slot in NAS :] -- http://fossarchy.blogspot.com/
pgpWRkj6NV6MS.pgp
Description: PGP signature
15.010000] pci 0000:00:04.0: reg 20 io port: [0x90000800-0x9000081f]
[ 15.010000] pci 0000:00:04.0: supports D1 D2
[ 15.010000] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot
[ 15.010000] pci 0000:00:04.0: PME# disabled
[ 15.010000] pci 0000:00:04.1: reg 20 io port: [0x90000820-0x9000083f]
[ 15.010000] pci 0000:00:04.1: supports D1 D2
[ 15.010000] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot
[ 15.010000] pci 0000:00:04.1: PME# disabled
[ 15.010000] pci 0000:00:04.2: reg 10 32bit mmio: [0x800a1400-0x800a14ff]
[ 15.010000] pci 0000:00:04.2: supports D1 D2
[ 15.010000] pci 0000:00:04.2: PME# supported from D0 D1 D2 D3hot
[ 15.010000] pci 0000:00:04.2: PME# disabled
[ 15.010000] pci 0000:00:05.0: reg 10 32bit mmio: [0x800a0000-0x800a0fff]
[ 15.010000] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 15.010000] pci 0000:00:05.0: PME# disabled
[ 15.010000] PCI: bus0: Fast back to back transfers disabled
[ 15.010000] bio: create slab <bio-0> at 0
[ 15.010000] vgaarb: loaded
[ 15.020000] NET: Registered protocol family 2
[ 15.020000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 15.030000] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 15.030000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 15.030000] TCP: Hash tables configured (established 16384 bind 16384)
[ 15.030000] TCP reno registered
[ 15.030000] NET: Registered protocol family 1
[ 15.030000] Unpacking initramfs...
[ 17.130000] Freeing initrd memory: 6612K
[ 17.130000] NetWinder Floating Point Emulator V0.97 (double precision)
[ 17.130000] audit: initializing netlink socket (disabled)
[ 17.130000] type=2000 audit(17.130:1): initialized
[ 17.140000] VFS: Disk quotas dquot_6.5.2
[ 17.140000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.140000] msgmni has been set to 1007
[ 17.140000] alg: No test for stdrng (krng)
[ 17.150000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 17.150000] io scheduler noop registered
[ 17.150000] io scheduler anticipatory registered
[ 17.150000] io scheduler deadline registered
[ 17.150000] io scheduler cfq registered (default)
[ 17.160000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 17.160000] serial8250.0: ttyS0 at MMIO 0xfe800000 (irq = 0) is a 16550A
[ 17.160000] physmap platform flash device: 01000000 at f0000000
[ 17.160000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
[ 17.160000] Intel/Sharp Extended Query Table at 0x0031
[ 17.160000] Intel/Sharp Extended Query Table at 0x0031
[ 17.160000] Using buffer write method
[ 17.160000] cfi_cmdset_0001: Erase suspend on write enabled
[ 17.160000] erase region 0: offset=0x0,size=0x20000,blocks=128
[ 17.160000] Searching for RedBoot partition table in physmap-flash.0 at
offset 0xfe0000
[ 17.480000] 6 RedBoot partitions found on MTD device physmap-flash.0
[ 17.480000] Creating 6 MTD partitions on "physmap-flash.0":
[ 17.480000] 0x000000000000-0x000000040000 : "RedBoot"
[ 17.480000] 0x000000040000-0x000000d40000 : "ramdisk"
[ 17.480000] 0x000000d40000-0x000000ea0000 : "kernel"
[ 17.480000] 0x000000ea0000-0x000000fc0000 : "user"
[ 17.480000] 0x000000fc0000-0x000000fc1000 : "RedBoot config"
[ 17.480000] mtd: partition "RedBoot config" doesn't end on an erase block --
force read-only
[ 17.480000] 0x000000fe0000-0x000001000000 : "FIS directory"
[ 17.490000] mice: PS/2 mouse device common for all mice
[ 17.490000] i2c /dev entries driver
[ 17.490000] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6
[ 17.490000] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0
[ 17.500000] pca9532 0-0060: setting platform data
[ 17.500000] Registered led device: n2100:red:satafail0
[ 17.500000] Registered led device: n2100:red:satafail1
[ 17.500000] Registered led device: n2100:blue:usb
[ 17.500000] Registered led device: n2100:red:usb
[ 17.500000] Registered led device: n2100:orange:system
[ 17.500000] Registered led device: n2100:red:system
[ 17.500000] input: N2100 beeper as /devices/virtual/input/input0
[ 17.520000] iop-adma iop-adma.0: Intel(R) IOP: ( cpy intr )
[ 17.540000] iop-adma iop-adma.1: Intel(R) IOP: ( cpy intr )
[ 17.540000] TCP cubic registered
[ 17.540000] NET: Registered protocol family 17
[ 17.540000] XScale DSP coprocessor detected.
[ 17.540000] registered taskstats version 1
[ 17.540000] rtc-rs5c372 0-0032: setting system clock to 2010-03-07 14:01:03
UTC (1267970463)
[ 17.540000] Freeing init memory: 112K
[ 20.650000] SCSI subsystem initialized
[ 21.290000] usbcore: registered new interface driver usbfs
[ 21.290000] usbcore: registered new interface driver hub
[ 21.290000] usbcore: registered new device driver usb
[ 21.430000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 21.430000] r8169 0000:00:01.0: no PCI Express capability
[ 21.430000] eth0: RTL8169sb/8110sb at 0xe08d2200, 00:14:fd:30:1a:56, XID
10000000 IRQ 27
[ 21.430000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 21.430000] r8169 0000:00:02.0: no PCI Express capability
[ 21.430000] eth1: RTL8169sb/8110sb at 0xe08d6300, 00:14:fd:30:1a:57, XID
10000000 IRQ 30
[ 21.950000] uhci_hcd: USB Universal Host Controller Interface driver
[ 21.950000] uhci_hcd 0000:00:04.0: UHCI Host Controller
[ 21.950000] uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus
number 1
[ 21.950000] uhci_hcd 0000:00:04.0: irq 28, io base 0x90000800
[ 21.950000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 21.950000] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 21.950000] usb usb1: Product: UHCI Host Controller
[ 21.950000] usb usb1: Manufacturer: Linux 2.6.32-trunk-iop32x uhci_hcd
[ 21.950000] usb usb1: SerialNumber: 0000:00:04.0
[ 21.950000] usb usb1: configuration #1 chosen from 1 choice
[ 21.950000] hub 1-0:1.0: USB hub found
[ 21.950000] hub 1-0:1.0: 2 ports detected
[ 21.950000] uhci_hcd 0000:00:04.1: UHCI Host Controller
[ 21.950000] uhci_hcd 0000:00:04.1: new USB bus registered, assigned bus
number 2
[ 21.950000] uhci_hcd 0000:00:04.1: irq 27, io base 0x90000820
[ 21.950000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 21.950000] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 21.950000] usb usb2: Product: UHCI Host Controller
[ 21.950000] usb usb2: Manufacturer: Linux 2.6.32-trunk-iop32x uhci_hcd
[ 21.950000] usb usb2: SerialNumber: 0000:00:04.1
[ 21.950000] usb usb2: configuration #1 chosen from 1 choice
[ 21.950000] hub 2-0:1.0: USB hub found
[ 21.950000] hub 2-0:1.0: 2 ports detected
[ 22.020000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 22.020000] Warning! ehci_hcd should always be loaded before uhci_hcd and
ohci_hcd, not after
[ 22.020000] ehci_hcd 0000:00:04.2: EHCI Host Controller
[ 22.020000] ehci_hcd 0000:00:04.2: new USB bus registered, assigned bus
number 3
[ 22.020000] ehci_hcd 0000:00:04.2: Enabling legacy PCI PM
[ 22.020000] ehci_hcd 0000:00:04.2: irq 29, io mem 0x800a1400
[ 22.040000] ehci_hcd 0000:00:04.2: USB 2.0 started, EHCI 1.00
[ 22.040000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 22.040000] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 22.040000] usb usb3: Product: EHCI Host Controller
[ 22.040000] usb usb3: Manufacturer: Linux 2.6.32-trunk-iop32x ehci_hcd
[ 22.040000] usb usb3: SerialNumber: 0000:00:04.2
[ 22.040000] usb usb3: configuration #1 chosen from 1 choice
[ 22.040000] hub 3-0:1.0: USB hub found
[ 22.040000] hub 3-0:1.0: 4 ports detected
[ 22.370000] libata version 3.00 loaded.
[ 22.430000] sata_sil 0000:00:03.0: version 2.4
[ 22.430000] scsi0 : sata_sil
[ 22.440000] scsi1 : sata_sil
[ 22.440000] ata1: SATA max UDMA/100 mmio m...@0x800a1000 tf 0x800a1080 irq 29
[ 22.440000] ata2: SATA max UDMA/100 mmio m...@0x800a1000 tf 0x800a10c0 irq 29
[ 22.810000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 22.850000] ata1.00: ATA-8: WDC WD5000AAKS-00C8A0, 12.01C02, max UDMA/133
[ 22.850000] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 22.870000] ata1.00: configured for UDMA/100
[ 22.870000] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0
PQ: 0 ANSI: 5
[ 23.220000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 23.240000] ata2.00: ATA-8: WDC WD7500AACS-65D6B0, 01.01A01, max UDMA/133
[ 23.240000] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 23.260000] ata2.00: configured for UDMA/100
[ 23.260000] scsi 1:0:0:0: Direct-Access ATA WDC WD7500AACS-6 01.0
PQ: 0 ANSI: 5
[ 23.550000] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 23.550000] sd 0:0:0:0: [sda] Write Protect is off
[ 23.550000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.550000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 23.550000] sda:
[ 23.550000] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750
GB/698 GiB)
[ 23.550000] sd 1:0:0:0: [sdb] Write Protect is off
[ 23.550000] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.550000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 23.560000] sda1
[ 23.560000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.580000] sdb: sdb1
[ 24.180000] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 25.100000] device-mapper: uevent: version 1.0.3
[ 25.120000] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 27.230000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 27.230000] EXT3-fs: write access will be enabled during recovery.
[ 33.360000] kjournald starting. Commit interval 5 seconds
[ 33.360000] EXT3-fs: dm-0: orphan cleanup on readonly fs
[ 33.370000] ext3_orphan_cleanup: deleting unreferenced inode 202689
[ 33.390000] ext3_orphan_cleanup: deleting unreferenced inode 245768
[ 33.390000] ext3_orphan_cleanup: deleting unreferenced inode 229778
[ 33.390000] ext3_orphan_cleanup: deleting unreferenced inode 164107
[ 33.400000] ext3_orphan_cleanup: deleting unreferenced inode 164108
[ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164115
[ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164097
[ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164104
[ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164109
[ 33.410000] ext3_orphan_cleanup: deleting unreferenced inode 164105
[ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164106
[ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164103
[ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164101
[ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164098
[ 33.430000] ext3_orphan_cleanup: deleting unreferenced inode 164100
[ 33.450000] ext3_orphan_cleanup: deleting unreferenced inode 196633
[ 33.460000] ext3_orphan_cleanup: deleting unreferenced inode 197706
[ 33.470000] ext3_orphan_cleanup: deleting unreferenced inode 199486
[ 33.470000] ext3_orphan_cleanup: deleting unreferenced inode 199476
[ 33.480000] ext3_orphan_cleanup: deleting unreferenced inode 199474
[ 33.490000] ext3_orphan_cleanup: deleting unreferenced inode 199472
[ 33.500000] ext3_orphan_cleanup: deleting unreferenced inode 197057
[ 33.510000] EXT3-fs: dm-0: 22 orphan inodes deleted
[ 33.510000] EXT3-fs: recovery complete.
[ 33.520000] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.960000] udevd version 125 started
[ 40.550000] lib80211: common routines for IEEE802.11 drivers
[ 40.550000] lib80211_crypt: registered algorithm 'NULL'
[ 40.640000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 40.640000] ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketr...@linux.intel.com>
[ 40.830000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver,
1.2.2kmprq
[ 40.830000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 40.840000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 40.840000] ipw2200 0000:00:05.0: firmware: requesting ipw2200-bss.fw
[ 41.220000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a
channels)
[ 41.230000] udev: renamed network interface eth2 to eth3
[ 42.690000] EXT3 FS on dm-0, internal journal
[ 44.270000] loop: module loaded
[ 45.920000] rtl_set_rx_mode: mc_filter = { 0x00000000, 0x00000000 }
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000
[ 45.920000] r8169: eth0: link up
[ 45.920000] rtl_set_rx_mode: mc_filter = { 0x00000000, 0x00000000 }
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000
[ 45.920000] rtl_set_rx_mode: mc_filter = { 0x80000000, 0x00000000 }
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000080000000
[ 45.920000] rtl_set_rx_mode: mc_filter = { 0x80000000, 0x00000000 }
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000080000000
[ 45.920000] rtl_set_rx_mode: mc_filter = { 0x80000000, 0x00000000 }
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000000000000
[ 45.920000] rtl_set_rx_mode: MAR = 0x0000000080000000
[ 45.980000] rtl_set_rx_mode: mc_filter = { 0x80000000, 0x00000000 }
[ 45.980000] rtl_set_rx_mode: MAR = 0x0000000000000000
[ 45.980000] rtl_set_rx_mode: MAR = 0x0000000080000000
[ 45.980000] device eth0 entered promiscuous mode
[ 45.980000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff }
[ 45.980000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 45.980000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 46.000000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff }
[ 46.000000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 46.000000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 46.000000] r8169: eth0: link up
[ 47.410000] NET: Registered protocol family 10
[ 47.410000] lo: Disabled Privacy Extensions
[ 47.410000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff }
[ 47.410000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 47.410000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 47.410000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff }
[ 47.410000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 47.410000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 49.140000] JFS: nTxBlock = 4032, nTxLock = 32261
[ 49.380000] Adding 2097144k swap on /dev/mapper/homenas-swap. Priority:-1
extents:1 across:2097144k
[ 53.510000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff }
[ 53.510000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 53.510000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 53.510000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff }
[ 53.510000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 53.510000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 57.760000] eth0: no IPv6 routers present
[ 424.350000] rtl_set_rx_mode: mc_filter = { 0xffffffff, 0xffffffff }
[ 424.350000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 424.350000] rtl_set_rx_mode: MAR = 0xffffffffffffffff
[ 424.350000] device eth0 left promiscuous mode
[ 424.350000] rtl_set_rx_mode: mc_filter = { 0x80088000, 0x40004000 }
[ 424.350000] rtl_set_rx_mode: MAR = 0x4000400040004000
[ 424.350000] rtl_set_rx_mode: MAR = 0x4000400080088000
