reassign 573343 xserver-xorg-video-intel thanks Hi Petter,
rassigning to the hopefully correct package... you are using xserver-xorg-video-intel, right? (check with "dpkg -l xserver-xorg-video-intel") On Donnerstag, 11. März 2010, Petter Dass wrote: > I did. Twice. > If you read this, but not the output from those two commands, that means > the bug site has a size limitation, and the output from the command is too > large. No. bugs.debian.org accepts megabytes as attachments. You failed somehow :) > If you know how to post the necessary info in the bug site, please do it, > or tell me how I can do it. Just include it or attach it to the mail like I do. dilb...@lacey:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Atheros AR8132 / L1c Gigabit Ethernet Adapter [1969:1062] (rev c0) 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) dilb...@lacey:~$ [ 1.694203] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.703755] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.703768] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.703840] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.703888] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.703912] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.707816] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.708535] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7db7c00 [ 1.725596] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.725665] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.725674] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.725683] usb usb1: Product: EHCI Host Controller [ 1.725690] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd [ 1.725697] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.725922] usb usb1: configuration #1 chosen from 1 choice [ 1.726022] hub 1-0:1.0: USB hub found [ 1.726045] hub 1-0:1.0: 8 ports detected [ 1.726223] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 1.726568] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 1.729351] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.733043] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02) [ 1.733075] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.733098] piix 0000:00:1f.1: IDE port disabled [ 1.733120] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 1.733134] ide0: BM-DMA at 0xffa0-0xffa7 [ 1.733154] Probing IDE interface ide0... [ 1.777420] libata version 3.00 loaded. [ 1.795517] uhci_hcd: USB Universal Host Controller Interface driver [ 1.855405] [drm] Initialized drm 1.1.0 20060810 [ 2.064031] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 2.232159] usb 1-2: New USB device found, idVendor=13d3, idProduct=5108 [ 2.232167] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.232173] usb 1-2: Product: USB 2.0 Camera [ 2.232178] usb 1-2: Manufacturer: Sonix Technology Co., Ltd. [ 2.232183] usb 1-2: SerialNumber: SN0001 [ 2.232902] usb 1-2: configuration #1 chosen from 1 choice [ 2.304143] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.304333] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.304355] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.304364] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.304401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.304451] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 2.304558] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.304567] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.304575] usb usb2: Product: UHCI Host Controller [ 2.304582] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 2.304589] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.304838] usb usb2: configuration #1 chosen from 1 choice [ 2.304935] hub 2-0:1.0: USB hub found [ 2.304957] hub 2-0:1.0: 2 ports detected [ 2.306726] ahci 0000:00:1f.2: version 3.0 [ 2.306762] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 2.306851] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 2.306995] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode [ 2.307008] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 2.307020] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.309487] scsi0 : ahci [ 2.309941] scsi1 : ahci [ 2.310211] scsi2 : ahci [ 2.310443] scsi3 : ahci [ 2.310958] ata1: SATA max UDMA/133 abar m1...@0xf7db7800 port 0xf7db7900 irq 27 [ 2.310965] ata2: DUMMY [ 2.310972] ata3: SATA max UDMA/133 abar m1...@0xf7db7800 port 0xf7db7a00 irq 27 [ 2.310977] ata4: DUMMY [ 2.311065] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.311077] i915 0000:00:02.0: setting latency timer to 64 [ 2.320368] [drm] set up 7M of stolen space [ 2.443270] integrated sync not supported [ 2.644044] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.645407] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.645780] ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133 [ 2.645789] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.647295] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.647711] ata1.00: configured for UDMA/133 [ 2.664037] ata3: SATA link down (SStatus 0 SControl 300) [ 2.664293] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5 [ 2.698223] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.698368] sd 0:0:0:0: [sda] Write Protect is off [ 2.698377] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.698453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.698831] sda: sda1 sda2 < sda5 > [ 2.739827] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.890599] integrated sync not supported [ 2.977444] [drm] LVDS-8: set mode 1024x600 e [ 3.164868] Console: switching to colour frame buffer device 128x37 [ 3.172652] fb0: inteldrmfb frame buffer device [ 3.172657] registered panic notifier [ 3.172671] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.172735] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.172751] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.172758] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.172787] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 3.172846] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 3.172930] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.172937] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.172942] usb usb3: Product: UHCI Host Controller [ 3.172947] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 3.172952] usb usb3: SerialNumber: 0000:00:1d.1 [ 3.173138] usb usb3: configuration #1 chosen from 1 choice [ 3.173207] hub 3-0:1.0: USB hub found [ 3.173222] hub 3-0:1.0: 2 ports detected [ 3.176162] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.176183] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.176193] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.176228] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 3.176296] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 3.176409] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.176418] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.176427] usb usb4: Product: UHCI Host Controller [ 3.176434] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 3.176442] usb usb4: SerialNumber: 0000:00:1d.2 [ 3.176676] usb usb4: configuration #1 chosen from 1 choice [ 3.176773] hub 4-0:1.0: USB hub found [ 3.176800] hub 4-0:1.0: 2 ports detected [ 3.176940] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 3.176957] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.176967] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.176991] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.177040] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 3.177143] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.177153] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.177161] usb usb5: Product: UHCI Host Controller [ 3.177168] usb usb5: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd [ 3.177176] usb usb5: SerialNumber: 0000:00:1d.3 [ 3.177382] usb usb5: configuration #1 chosen from 1 choice [ 3.177476] hub 5-0:1.0: USB hub found [ 3.177497] hub 5-0:1.0: 2 ports detected [ 3.276172] PM: Starting manual resume from disk [ 3.314727] EXT3-fs: INFO: recovery required on readonly filesystem. [ 3.314734] EXT3-fs: write access will be enabled during recovery. [ 3.484032] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 3.660454] usb 4-2: New USB device found, idVendor=0a5c, idProduct=4500 [ 3.660462] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.660469] usb 4-2: Product: BCM2046B1 [ 3.660473] usb 4-2: Manufacturer: Broadcom [ 3.660664] usb 4-2: configuration #1 chosen from 1 choice [ 3.663541] hub 4-2:1.0: USB hub found [ 3.665440] hub 4-2:1.0: 3 ports detected [ 3.945481] usb 4-2.1: new full speed USB device using uhci_hcd and address 3 [ 4.074508] usb 4-2.1: New USB device found, idVendor=0a5c, idProduct=4502 [ 4.074516] usb 4-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.074708] usb 4-2.1: configuration #1 chosen from 1 choice [ 4.104506] usbcore: registered new interface driver hiddev [ 4.107189] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2.1/4-2.1:1.0/input/input6 [ 4.107399] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.2-2.1/input0 [ 4.107454] usbcore: registered new interface driver usbhid [ 4.107560] usbhid: v2.6:USB HID core driver [ 4.153501] usb 4-2.2: new full speed USB device using uhci_hcd and address 4 [ 4.276518] usb 4-2.2: New USB device found, idVendor=0a5c, idProduct=4503 [ 4.276527] usb 4-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.276722] usb 4-2.2: configuration #1 chosen from 1 choice [ 4.285828] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2.2/4-2.2:1.0/input/input7 [ 4.286373] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.2-2.2/input0 [ 4.361519] usb 4-2.3: new full speed USB device using uhci_hcd and address 5 [ 4.500525] usb 4-2.3: New USB device found, idVendor=0a5c, idProduct=2153 [ 4.500534] usb 4-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.500540] usb 4-2.3: Product: BCM92046DG-CL1ROM [ 4.500545] usb 4-2.3: Manufacturer: Broadcom Corp [ 4.500550] usb 4-2.3: SerialNumber: 000A3A892D84 [ 4.500745] usb 4-2.3: configuration #1 chosen from 1 choice [ 5.958654] kjournald starting. Commit interval 5 seconds [ 5.958682] EXT3-fs: recovery complete. [ 5.963297] EXT3-fs: mounted filesystem with ordered data mode. [ 7.837122] udev: starting version 151 [ 8.433642] ACPI: AC Adapter [AC0] (off-line) [ 8.434832] ACPI: SSDT 7f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 8.436281] ACPI: SSDT 7f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 8.460840] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8.460866] atl1c 0000:01:00.0: setting latency timer to 64 [ 8.480825] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 8.481019] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.488197] Monitor-Mwait will be used to enter C-1 state [ 8.506029] Monitor-Mwait will be used to enter C-2 state [ 8.506141] Monitor-Mwait will be used to enter C-3 state [ 8.506164] Marking TSC unstable due to TSC halts in idle [ 8.506444] processor LNXCPU:00: registered as cooling_device0 [ 8.507583] ACPI: SSDT 7f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 8.508515] ACPI: SSDT 7f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 8.509823] Switching to clocksource hpet [ 8.522703] processor LNXCPU:01: registered as cooling_device1 [ 8.581867] atl1c 0000:01:00.0: version 1.0.0.1-NAPI [ 8.648539] ACPI: Battery Slot [BAT0] (battery present) [ 9.274125] intel_rng: FWH not detected [ 9.550676] eeepc_laptop: Eee PC Hotkey Driver [ 9.551134] eeepc_laptop: Hotkey init flags 0x41 [ 9.551320] eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway [ 9.556178] eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway [ 9.561329] eeepc_laptop: TPD (8000000) not reported by BIOS, enabling anyway [ 9.561342] eeepc_laptop: Get control methods supported: 0xe101711 [ 9.565650] input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input9 [ 9.681596] cfg80211: Using static regulatory domain info [ 9.681604] cfg80211: Regulatory domain: US [ 9.681609] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.681619] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 9.681628] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 9.681637] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 9.681645] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 9.681654] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 9.681662] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 9.682212] cfg80211: Calling CRDA for country: US [ 9.873380] Bluetooth: Core ver 2.15 [ 9.874355] NET: Registered protocol family 31 [ 9.874360] Bluetooth: HCI device and connection manager initialized [ 9.874367] Bluetooth: HCI socket layer initialized [ 9.973662] Linux video capture interface: v2.00 [ 10.077171] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04731/0xa40000 [ 10.150465] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 10.373500] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.373523] ath9k 0000:02:00.0: setting latency timer to 64 [ 10.412284] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 10.423865] ath: EEPROM regdomain: 0x60 [ 10.423873] ath: EEPROM indicates we should expect a direct regpair map [ 10.423883] ath: Country alpha2 being used: 00 [ 10.423889] ath: Regpair used: 0x60 [ 10.517169] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5108) [ 10.525586] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input11 [ 10.525808] usbcore: registered new interface driver uvcvideo [ 10.525894] USB Video Class driver (v0.1.0) [ 10.568918] usbcore: registered new interface driver btusb [ 10.722745] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 10.724334] Registered led device: ath9k-phy0::radio [ 10.724374] Registered led device: ath9k-phy0::assoc [ 10.724416] Registered led device: ath9k-phy0::tx [ 10.724456] Registered led device: ath9k-phy0::rx [ 10.724493] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf89c0000, irq=17 [ 10.998115] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.998214] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.101262] hda_codec: ALC269: BIOS auto-probing. [ 11.101866] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12 [ 12.041866] Adding 6056464k swap on /dev/sda5. Priority:-1 extents:1 across:6056464k [ 12.285095] EXT3 FS on sda1, internal journal [ 12.410019] loop: module loaded [ 13.269635] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 18.179909] fuse init (API version 7.13) [ 20.137293] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 20.137302] vboxdrv: Successfully done. [ 20.137308] vboxdrv: Found 2 processor cores. [ 20.137484] vboxdrv: fAsync=0 offMin=0x174 offMax=0x93c [ 20.137593] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 20.137600] vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001). [ 21.868624] Bluetooth: L2CAP ver 2.14 [ 21.868631] Bluetooth: L2CAP socket layer initialized [ 21.890375] Bluetooth: RFCOMM TTY layer initialized [ 21.890388] Bluetooth: RFCOMM socket layer initialized [ 21.890395] Bluetooth: RFCOMM ver 1.11 [ 21.939577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.939586] Bluetooth: BNEP filters: protocol multicast [ 21.988023] Bridge firewalling registered [ 22.101213] Bluetooth: SCO (Voice Link) ver 0.6 [ 22.101224] Bluetooth: SCO socket layer initialized [ 22.117446] usb 4-2.1: input irq status -75 received [ 22.133459] usb 4-2.1: input irq status -75 received [ 22.149463] usb 4-2.1: input irq status -75 received [ 22.165462] usb 4-2.1: input irq status -75 received [ 22.181462] usb 4-2.1: input irq status -75 received [ 22.197458] usb 4-2.1: input irq status -75 received [ 22.213464] usb 4-2.1: input irq status -75 received [ 22.228461] usb 4-2.1: input irq status -75 received [ 22.245454] usb 4-2.1: input irq status -75 received [ 22.261459] usb 4-2.1: input irq status -75 received [ 22.276453] usb 4-2.1: input irq status -75 received [ 22.293460] usb 4-2.1: input irq status -75 received [ 22.309458] usb 4-2.1: input irq status -75 received [ 22.325454] usb 4-2.1: input irq status -75 received [ 22.341437] usb 4-2.1: input irq status -75 received [ 24.221966] lp: driver loaded but no devices found [ 24.273162] ppdev: user-space parallel port driver [ 24.492364] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X [ 24.493147] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.504130] integrated sync not supported [ 27.644188] integrated sync not supported [ 36.351710] wlan0: deauthenticating from 00:11:50:41:e3:b9 by local choice (reason=3) [ 36.545583] wlan0: direct probe to AP 00:11:50:41:e3:b9 (try 1) [ 36.548057] wlan0: direct probe responded [ 36.548074] wlan0: authenticate with AP 00:11:50:41:e3:b9 (try 1) [ 36.550160] wlan0: authenticated [ 36.550223] wlan0: associate with AP 00:11:50:41:e3:b9 (try 1) [ 36.552794] wlan0: RX AssocResp from 00:11:50:41:e3:b9 (capab=0x401 status=0 aid=3) [ 36.552818] wlan0: associated [ 36.553756] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 47.140140] wlan0: no IPv6 routers present [ 54.984261] CPU0 attaching NULL sched-domain. [ 54.984270] CPU1 attaching NULL sched-domain. [ 55.016247] CPU0 attaching sched-domain: [ 55.016262] domain 0: span 0-1 level SIBLING [ 55.016274] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 55.016299] domain 1: span 0-1 level MC [ 55.016309] groups: 0-1 (cpu_power = 1178) [ 55.016329] CPU1 attaching sched-domain: [ 55.016339] domain 0: span 0-1 level SIBLING [ 55.016349] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 55.016371] domain 1: span 0-1 level MC [ 55.016381] groups: 0-1 (cpu_power = 1178) [ 56.348951] integrated sync not supported [ 56.496013] integrated sync not supported [ 56.648293] integrated sync not supported [ 78.690057] integrated sync not supported [ 3874.420194] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 3874.553557] usb 1-5: New USB device found, idVendor=0421, idProduct=0154 [ 3874.553574] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3874.553586] usb 1-5: Product: Nokia 5800 XpressMusic [ 3874.553596] usb 1-5: Manufacturer: Nokia [ 3874.553605] usb 1-5: SerialNumber: 353184030390962 [ 3874.554330] usb 1-5: configuration #1 chosen from 1 choice [ 3875.127548] cdc_acm 1-5:1.1: ttyACM0: USB ACM device [ 3875.129456] usbcore: registered new interface driver cdc_acm [ 3875.129468] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 3875.165584] NET: Registered protocol family 35 [ 3875.171442] usbcore: registered new interface driver cdc_ether [ 3875.180512] usb 1-5: bad CDC descriptors [ 3875.180589] usbcore: registered new interface driver rndis_host [ 3875.191210] cdc_phonet: probe of 1-5:1.10 failed with error -22 [ 3875.191270] usbcore: registered new interface driver cdc_phonet [ 3875.214413] usb 1-5: bad CDC descriptors [ 3875.214500] usbcore: registered new interface driver rndis_wlan [ 3974.149016] usb 1-5: USB disconnect, address 4 [ 3978.004224] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 3978.137616] usb 1-5: New USB device found, idVendor=0421, idProduct=0154 [ 3978.137633] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3978.137645] usb 1-5: Product: Nokia 5800 XpressMusic [ 3978.137655] usb 1-5: Manufacturer: Nokia [ 3978.137664] usb 1-5: SerialNumber: 353184030390962 [ 3978.138311] usb 1-5: configuration #1 chosen from 1 choice [ 3978.141473] cdc_acm 1-5:1.1: ttyACM0: USB ACM device [ 3978.143823] usb 1-5: bad CDC descriptors [ 3978.144474] usb 1-5: bad CDC descriptors [ 3978.146941] cdc_phonet: probe of 1-5:1.10 failed with error -22 [ 4009.744002] usb 1-5: USB disconnect, address 5 [ 4027.564210] usb 1-1: new high speed USB device using ehci_hcd and address 6 [ 4027.697508] usb 1-1: New USB device found, idVendor=0421, idProduct=0154 [ 4027.697525] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4027.697538] usb 1-1: Product: Nokia 5800 XpressMusic [ 4027.697548] usb 1-1: Manufacturer: Nokia [ 4027.697557] usb 1-1: SerialNumber: 353184030390962 [ 4027.697957] usb 1-1: configuration #1 chosen from 1 choice [ 4027.699997] cdc_acm 1-1:1.1: ttyACM0: USB ACM device [ 4027.703869] usb 1-1: bad CDC descriptors [ 4027.704892] usb 1-1: bad CDC descriptors [ 4027.708974] cdc_phonet: probe of 1-1:1.10 failed with error -22 [ 4125.026179] usb 1-1: USB disconnect, address 6 [ 4127.184209] usb 1-1: new high speed USB device using ehci_hcd and address 7 [ 4127.317614] usb 1-1: New USB device found, idVendor=0421, idProduct=0154 [ 4127.317631] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4127.317643] usb 1-1: Product: Nokia 5800 XpressMusic [ 4127.317653] usb 1-1: Manufacturer: Nokia [ 4127.317662] usb 1-1: SerialNumber: 353184030390962 [ 4127.318060] usb 1-1: configuration #1 chosen from 1 choice [ 4127.323918] cdc_acm 1-1:1.1: ttyACM0: USB ACM device [ 4127.325792] usb 1-1: bad CDC descriptors [ 4127.326009] usb 1-1: bad CDC descriptors [ 4127.329566] cdc_phonet: probe of 1-1:1.10 failed with error -22 [ 4128.435426] usb 1-1: USB disconnect, address 7 [ 4134.300202] usb 1-1: new high speed USB device using ehci_hcd and address 8 [ 4134.433236] usb 1-1: New USB device found, idVendor=0421, idProduct=0156 [ 4134.433253] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4134.433266] usb 1-1: Product: Nokia 5800 XpressMusic [ 4134.433275] usb 1-1: Manufacturer: Nokia [ 4134.433284] usb 1-1: SerialNumber: 353184030390962 [ 4134.437409] usb 1-1: configuration #1 chosen from 1 choice [ 4134.562469] Initializing USB Mass Storage driver... [ 4134.562830] scsi4 : SCSI emulation for USB Mass Storage devices [ 4134.563056] usb-storage: device found at 8 [ 4134.563062] usb-storage: waiting for device to settle before scanning [ 4134.563089] usbcore: registered new interface driver usb-storage [ 4134.563098] USB Mass Storage support registered. [ 4139.561659] usb-storage: device scan complete [ 4139.562544] scsi 4:0:0:0: Direct-Access Nokia S60 1.0 PQ: 0 ANSI: 0 [ 4139.569274] sd 4:0:0:0: [sdb] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB) [ 4139.569759] sd 4:0:0:0: [sdb] Write Protect is off [ 4139.569767] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 4139.569773] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 4139.571503] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 4139.571514] sdb: [ 4139.715693] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 4139.715717] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 4140.327589] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 4166.873224] usb 1-1: USB disconnect, address 8 [ 4572.136214] usb 1-5: new high speed USB device using ehci_hcd and address 9 [ 4572.269097] usb 1-5: New USB device found, idVendor=0781, idProduct=5406 [ 4572.269114] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4572.269126] usb 1-5: Product: U3 Cruzer Micro [ 4572.269135] usb 1-5: Manufacturer: SanDisk [ 4572.269144] usb 1-5: SerialNumber: 1739711B0100F64A [ 4572.269819] usb 1-5: configuration #1 chosen from 1 choice [ 4572.270658] scsi5 : SCSI emulation for USB Mass Storage devices [ 4572.271479] usb-storage: device found at 9 [ 4572.271492] usb-storage: waiting for device to settle before scanning [ 4577.268380] usb-storage: device scan complete [ 4577.269139] scsi 5:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS [ 4577.269788] scsi 5:0:0:1: CD-ROM SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 [ 4577.278948] sd 5:0:0:0: [sdb] 31306239 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 4577.280735] sd 5:0:0:0: [sdb] Write Protect is off [ 4577.280759] sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 4577.280774] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 4577.290228] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 4577.290244] sdb: sdb1 [ 4577.293307] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 4577.293322] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 4577.388174] sr0: scsi3-mmc drive: 48x/48x tray [ 4577.388184] Uniform CD-ROM driver Revision: 3.20 [ 4577.388791] sr 5:0:0:1: Attached scsi CD-ROM sr0 [ 4577.458802] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4577.459382] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 4577.459835] sr 5:0:0:1: Attached scsi generic sg2 type 5 [ 4577.846770] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 4577.869168] UDF-fs: No VRS found [ 4577.869178] UDF-fs: No partition found (1) [ 4577.873040] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 4577.873786] ISOFS: changing to secondary root [ 4652.748197] usb 1-1: new high speed USB device using ehci_hcd and address 10 [ 4652.881511] usb 1-1: New USB device found, idVendor=0421, idProduct=0156 [ 4652.881529] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4652.881541] usb 1-1: Product: Nokia 5800 XpressMusic [ 4652.881551] usb 1-1: Manufacturer: Nokia [ 4652.881560] usb 1-1: SerialNumber: 353184030390962 [ 4652.884162] usb 1-1: configuration #1 chosen from 1 choice [ 4652.887209] scsi6 : SCSI emulation for USB Mass Storage devices [ 4652.887744] usb-storage: device found at 10 [ 4652.887756] usb-storage: waiting for device to settle before scanning [ 4657.884675] usb-storage: device scan complete [ 4657.885417] scsi 6:0:0:0: Direct-Access Nokia S60 1.0 PQ: 0 ANSI: 0 [ 4657.888775] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 4657.891378] sd 6:0:0:0: [sdc] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB) [ 4657.892449] sd 6:0:0:0: [sdc] Write Protect is off [ 4657.892471] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 4657.892486] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 4657.897266] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 4657.897296] sdc: [ 4658.075827] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 4658.075847] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 4658.630560] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 4672.308370] integrated sync not supported [ 4815.921525] usb 1-1: USB disconnect, address 10 [ 5206.971029] usb 1-5: USB disconnect, address 9 [ 5725.929128] CE: hpet increasing min_delta_ns to 15000 nsec dilb...@lacey:~$ cheers, Holger
signature.asc
Description: This is a digitally signed message part.