Package: extlinux
Version: 2:3.85+dfsg-1
Severity: normal
I tried to use live-helper to build a rescue image for hosts that use
extlinux as their bootloader. Thus, I asked live-helper to include
extlinux in its package list, so that I can run "extlinux --install"
from the resulting rescue image, to rescue the broken host.
The attached transcript shows that doing so falls down, AFAICT due to
update-extlinux.
The command I ran (via sudo -s, in an empty working directory) was:
lh config --distribution=squeeze
--mirror=http://mirror.internode.on.net/pub/debian --packages=extlinux &&
lh build
I believe the relevant part of the transcript is:
Setting up linux-image-2.6.32-3-amd64 (2.6.32-9) ...
Running depmod.
Running update-initramfs.
update-initramfs: Generating /boot/initrd.img-2.6.32-3-amd64
cryptsetup: WARNING: could not determine root device from /etc/fstab
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/extlinux 2.6.32-3-amd64
/boot/vmlinuz-2.6.32-3-amd64
run-parts: /etc/kernel/postinst.d/extlinux exited with return code 1
Failed to process /etc/kernel/postinst.d at
/var/lib/dpkg/info/linux-image-2.6.32-3-amd64.postinst line 868.
dpkg: error processing linux-image-2.6.32-3-amd64 (--configure):
subprocess installed post-installation script returned error exit status 9
I'm not sure how to get more information out of extlinux, short of
trying to pause live-helper halfway and attempt to add a "set -x" to
its update-extlinux in situ.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.33-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.utf8, LC_CTYPE=en_AU.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages extlinux depends on:
ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib
Versions of packages extlinux recommends:
ii syslinux-common 2:3.85+dfsg-1 Kernel loader which uses a FAT, ex
extlinux suggests no packages.
-- no debconf information
Script started on Tue 16 Mar 2010 16:03:18 EST
with-temp-dir: entering directory `/tmp/with-temp-dir.0H3qEB'
[1;37mP[0m: Considering defaults defined in /etc/default/live-helper
P: Creating config tree
P: Setting up cleanup function
P: Begin caching bootstrap stage...
P: Begin bootstrapping system...
P: If the following stage fails, the most likely cause of the problem is with
your mirror configuration or a caching proxy.
P: Running debootstrap (download-only)...
I: Retrieving Release
I: Retrieving Packages
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Found additional required dependencies: dash insserv libdb4.8
I: Found additional base dependencies: libudev0
I: Checking component main on http://mirror.internode.on.net/pub/debian...
I: Retrieving libacl1
I: Validating libacl1
I: Retrieving adduser
I: Validating adduser
I: Retrieving apt-utils
I: Validating apt-utils
I: Retrieving apt
I: Validating apt
I: Retrieving aptitude
I: Validating aptitude
I: Retrieving libattr1
I: Validating libattr1
I: Retrieving base-files
I: Validating base-files
I: Retrieving base-passwd
I: Validating base-passwd
I: Retrieving bash
I: Validating bash
I: Retrieving bsdmainutils
I: Validating bsdmainutils
I: Retrieving libbz2-1.0
I: Validating libbz2-1.0
I: Retrieving coreutils
I: Validating coreutils
I: Retrieving cpio
I: Validating cpio
I: Retrieving cron
I: Validating cron
I: Retrieving libcwidget3
I: Validating libcwidget3
I: Retrieving dash
I: Validating dash
I: Retrieving libdb4.8
I: Validating libdb4.8
I: Retrieving debconf-i18n
I: Validating debconf-i18n
I: Retrieving debconf
I: Validating debconf
I: Retrieving debian-archive-keyring
I: Validating debian-archive-keyring
I: Retrieving debianutils
I: Validating debianutils
I: Retrieving dhcp3-client
I: Validating dhcp3-client
I: Retrieving dhcp3-common
I: Validating dhcp3-common
I: Retrieving diffutils
I: Validating diffutils
I: Retrieving dmidecode
I: Validating dmidecode
I: Retrieving dpkg
I: Validating dpkg
I: Retrieving e2fslibs
I: Validating e2fslibs
I: Retrieving e2fsprogs
I: Validating e2fsprogs
I: Retrieving libcomerr2
I: Validating libcomerr2
I: Retrieving libss2
I: Validating libss2
I: Retrieving ed
I: Validating ed
I: Retrieving libc-bin
I: Validating libc-bin
I: Retrieving libc6
I: Validating libc6
I: Retrieving findutils
I: Validating findutils
I: Retrieving gcc-4.4-base
I: Validating gcc-4.4-base
I: Retrieving libgcc1
I: Validating libgcc1
I: Retrieving libstdc++6
I: Validating libstdc++6
I: Retrieving libgdbm3
I: Validating libgdbm3
I: Retrieving gnupg
I: Validating gnupg
I: Retrieving gpgv
I: Validating gpgv
I: Retrieving grep
I: Validating grep
I: Retrieving groff-base
I: Validating groff-base
I: Retrieving gzip
I: Validating gzip
I: Retrieving hostname
I: Validating hostname
I: Retrieving ifupdown
I: Validating ifupdown
I: Retrieving insserv
I: Validating insserv
I: Retrieving iproute
I: Validating iproute
I: Retrieving iptables
I: Validating iptables
I: Retrieving iputils-ping
I: Validating iputils-ping
I: Retrieving logrotate
I: Validating logrotate
I: Retrieving lsb-base
I: Validating lsb-base
I: Retrieving lzma
I: Validating lzma
I: Retrieving libept0
I: Validating libept0
I: Retrieving liblocale-gettext-perl
I: Validating liblocale-gettext-perl
I: Retrieving libselinux1
I: Validating libselinux1
I: Retrieving libsepol1
I: Validating libsepol1
I: Retrieving libsigc++-2.0-0c2a
I: Validating libsigc++-2.0-0c2a
I: Retrieving libtasn1-3
I: Validating libtasn1-3
I: Retrieving libtext-charwidth-perl
I: Validating libtext-charwidth-perl
I: Retrieving libtext-iconv-perl
I: Validating libtext-iconv-perl
I: Retrieving libtext-wrapi18n-perl
I: Validating libtext-wrapi18n-perl
I: Retrieving libusb-0.1-4
I: Validating libusb-0.1-4
I: Retrieving man-db
I: Validating man-db
I: Retrieving manpages
I: Validating manpages
I: Retrieving mawk
I: Validating mawk
I: Retrieving module-init-tools
I: Validating module-init-tools
I: Retrieving nano
I: Validating nano
I: Retrieving libncurses5
I: Validating libncurses5
I: Retrieving libncursesw5
I: Validating libncursesw5
I: Retrieving ncurses-base
I: Validating ncurses-base
I: Retrieving ncurses-bin
I: Validating ncurses-bin
I: Retrieving net-tools
I: Validating net-tools
I: Retrieving netbase
I: Validating netbase
I: Retrieving netcat-traditional
I: Validating netcat-traditional
I: Retrieving libnewt0.52
I: Validating libnewt0.52
I: Retrieving whiptail
I: Validating whiptail
I: Retrieving libssl0.9.8
I: Validating libssl0.9.8
I: Retrieving libpam-modules
I: Validating libpam-modules
I: Retrieving libpam-runtime
I: Validating libpam-runtime
I: Retrieving libpam0g
I: Validating libpam0g
I: Retrieving perl-base
I: Validating perl-base
I: Retrieving libpopt0
I: Validating libpopt0
I: Retrieving procps
I: Validating procps
I: Retrieving libreadline5
I: Validating libreadline5
I: Retrieving libreadline6
I: Validating libreadline6
I: Retrieving readline-common
I: Validating readline-common
I: Retrieving rsyslog
I: Validating rsyslog
I: Retrieving sed
I: Validating sed
I: Retrieving sensible-utils
I: Validating sensible-utils
I: Retrieving login
I: Validating login
I: Retrieving passwd
I: Validating passwd
I: Retrieving libslang2
I: Validating libslang2
I: Retrieving initscripts
I: Validating initscripts
I: Retrieving sysv-rc
I: Validating sysv-rc
I: Retrieving sysvinit-utils
I: Validating sysvinit-utils
I: Retrieving sysvinit
I: Validating sysvinit
I: Retrieving tar
I: Validating tar
I: Retrieving tasksel-data
I: Validating tasksel-data
I: Retrieving tasksel
I: Validating tasksel
I: Retrieving libwrap0
I: Validating libwrap0
I: Retrieving info
I: Validating info
I: Retrieving install-info
I: Validating install-info
I: Retrieving traceroute
I: Validating traceroute
I: Retrieving tzdata
I: Validating tzdata
I: Retrieving libudev0
I: Validating libudev0
I: Retrieving udev
I: Validating udev
I: Retrieving bsdutils
I: Validating bsdutils
I: Retrieving libblkid1
I: Validating libblkid1
I: Retrieving libuuid1
I: Validating libuuid1
I: Retrieving mount
I: Validating mount
I: Retrieving util-linux
I: Validating util-linux
I: Retrieving vim-common
I: Validating vim-common
I: Retrieving vim-tiny
I: Validating vim-tiny
I: Retrieving wget
I: Validating wget
I: Retrieving libxapian15
I: Validating libxapian15
I: Retrieving zlib1g
I: Validating zlib1g
P: If the following stage fails, the most likely cause of the problem is with
your mirror configuration or a caching proxy.
P: Running debootstrap...
I: Retrieving Release
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Found additional required dependencies: dash insserv libdb4.8
I: Found additional base dependencies: libudev0
I: Checking component main on http://mirror.internode.on.net/pub/debian...
I: Validating libacl1
I: Validating adduser
I: Validating apt-utils
I: Validating apt
I: Validating aptitude
I: Validating libattr1
I: Validating base-files
I: Validating base-passwd
I: Validating bash
I: Validating bsdmainutils
I: Validating libbz2-1.0
I: Validating coreutils
I: Validating cpio
I: Validating cron
I: Validating libcwidget3
I: Validating dash
I: Validating libdb4.8
I: Validating debconf-i18n
I: Validating debconf
I: Validating debian-archive-keyring
I: Validating debianutils
I: Validating dhcp3-client
I: Validating dhcp3-common
I: Validating diffutils
I: Validating dmidecode
I: Validating dpkg
I: Validating e2fslibs
I: Validating e2fsprogs
I: Validating libcomerr2
I: Validating libss2
I: Validating ed
I: Validating libc-bin
I: Validating libc6
I: Validating findutils
I: Validating gcc-4.4-base
I: Validating libgcc1
I: Validating libstdc++6
I: Validating libgdbm3
I: Validating gnupg
I: Validating gpgv
I: Validating grep
I: Validating groff-base
I: Validating gzip
I: Validating hostname
I: Validating ifupdown
I: Validating insserv
I: Validating iproute
I: Validating iptables
I: Validating iputils-ping
I: Validating logrotate
I: Validating lsb-base
I: Validating lzma
I: Validating libept0
I: Validating liblocale-gettext-perl
I: Validating libselinux1
I: Validating libsepol1
I: Validating libsigc++-2.0-0c2a
I: Validating libtasn1-3
I: Validating libtext-charwidth-perl
I: Validating libtext-iconv-perl
I: Validating libtext-wrapi18n-perl
I: Validating libusb-0.1-4
I: Validating man-db
I: Validating manpages
I: Validating mawk
I: Validating module-init-tools
I: Validating nano
I: Validating libncurses5
I: Validating libncursesw5
I: Validating ncurses-base
I: Validating ncurses-bin
I: Validating net-tools
I: Validating netbase
I: Validating netcat-traditional
I: Validating libnewt0.52
I: Validating whiptail
I: Validating libssl0.9.8
I: Validating libpam-modules
I: Validating libpam-runtime
I: Validating libpam0g
I: Validating perl-base
I: Validating libpopt0
I: Validating procps
I: Validating libreadline5
I: Validating libreadline6
I: Validating readline-common
I: Validating rsyslog
I: Validating sed
I: Validating sensible-utils
I: Validating login
I: Validating passwd
I: Validating libslang2
I: Validating initscripts
I: Validating sysv-rc
I: Validating sysvinit-utils
I: Validating sysvinit
I: Validating tar
I: Validating tasksel-data
I: Validating tasksel
I: Validating libwrap0
I: Validating info
I: Validating install-info
I: Validating traceroute
I: Validating tzdata
I: Validating libudev0
I: Validating udev
I: Validating bsdutils
I: Validating libblkid1
I: Validating libuuid1
I: Validating mount
I: Validating util-linux
I: Validating vim-common
I: Validating vim-tiny
I: Validating wget
I: Validating libxapian15
I: Validating zlib1g
I: Chosen extractor for .deb packages: dpkg-deb
I: Extracting libacl1...
I: Extracting libattr1...
I: Extracting base-files...
I: Extracting base-passwd...
I: Extracting bash...
I: Extracting coreutils...
I: Extracting dash...
I: Extracting libdb4.8...
I: Extracting debconf-i18n...
I: Extracting debconf...
I: Extracting debianutils...
I: Extracting diffutils...
I: Extracting dpkg...
I: Extracting e2fslibs...
I: Extracting e2fsprogs...
I: Extracting libcomerr2...
I: Extracting libss2...
I: Extracting libc-bin...
I: Extracting libc6...
I: Extracting findutils...
I: Extracting gcc-4.4-base...
I: Extracting libgcc1...
I: Extracting libstdc++6...
I: Extracting grep...
I: Extracting gzip...
I: Extracting hostname...
I: Extracting insserv...
I: Extracting lsb-base...
I: Extracting lzma...
I: Extracting liblocale-gettext-perl...
I: Extracting libselinux1...
I: Extracting libsepol1...
I: Extracting libtext-charwidth-perl...
I: Extracting libtext-iconv-perl...
I: Extracting libtext-wrapi18n-perl...
I: Extracting mawk...
I: Extracting libncurses5...
I: Extracting ncurses-base...
I: Extracting ncurses-bin...
I: Extracting libpam-modules...
I: Extracting libpam-runtime...
I: Extracting libpam0g...
I: Extracting perl-base...
I: Extracting sed...
I: Extracting sensible-utils...
I: Extracting login...
I: Extracting passwd...
I: Extracting initscripts...
I: Extracting sysv-rc...
I: Extracting sysvinit-utils...
I: Extracting sysvinit...
I: Extracting tar...
I: Extracting tzdata...
I: Extracting bsdutils...
I: Extracting libblkid1...
I: Extracting libuuid1...
I: Extracting mount...
I: Extracting util-linux...
I: Extracting zlib1g...
I: Installing core packages...
I: Unpacking required packages...
I: Unpacking libacl1...
I: Unpacking libattr1...
I: Unpacking base-files...
I: Unpacking base-passwd...
I: Unpacking bash...
I: Unpacking coreutils...
I: Unpacking dash...
I: Unpacking libdb4.8...
I: Unpacking debconf-i18n...
I: Unpacking debconf...
I: Unpacking debianutils...
I: Unpacking diffutils...
I: Unpacking dpkg...
I: Unpacking e2fslibs...
I: Unpacking e2fsprogs...
I: Unpacking libcomerr2...
I: Unpacking libss2...
I: Unpacking libc-bin...
I: Unpacking libc6...
I: Unpacking findutils...
I: Unpacking gcc-4.4-base...
I: Unpacking libgcc1...
I: Unpacking libstdc++6...
I: Unpacking grep...
I: Unpacking gzip...
I: Unpacking hostname...
I: Unpacking insserv...
I: Unpacking lsb-base...
I: Unpacking lzma...
I: Unpacking liblocale-gettext-perl...
I: Unpacking libselinux1...
I: Unpacking libsepol1...
I: Unpacking libtext-charwidth-perl...
I: Unpacking libtext-iconv-perl...
I: Unpacking libtext-wrapi18n-perl...
I: Unpacking mawk...
I: Unpacking libncurses5...
I: Unpacking ncurses-base...
I: Unpacking ncurses-bin...
I: Unpacking libpam-modules...
I: Unpacking libpam-runtime...
I: Unpacking libpam0g...
I: Unpacking perl-base...
I: Unpacking sed...
I: Unpacking sensible-utils...
I: Unpacking login...
I: Unpacking passwd...
I: Unpacking initscripts...
I: Unpacking sysv-rc...
I: Unpacking sysvinit-utils...
I: Unpacking sysvinit...
I: Unpacking tar...
I: Unpacking tzdata...
I: Unpacking bsdutils...
I: Unpacking libblkid1...
I: Unpacking libuuid1...
I: Unpacking mount...
I: Unpacking util-linux...
I: Unpacking zlib1g...
I: Configuring required packages...
I: Configuring sensible-utils...
I: Configuring libc-bin...
I: Configuring gcc-4.4-base...
I: Configuring libc6...
I: Configuring debianutils...
I: Configuring bsdutils...
I: Configuring libsepol1...
I: Configuring diffutils...
I: Configuring tar...
I: Configuring zlib1g...
I: Configuring libgcc1...
I: Configuring libncurses5...
I: Configuring libattr1...
I: Configuring e2fslibs...
I: Configuring base-passwd...
I: Configuring libcomerr2...
I: Configuring mawk...
I: Configuring libdb4.8...
I: Configuring grep...
I: Configuring hostname...
I: Configuring libacl1...
I: Configuring libss2...
I: Configuring findutils...
I: Configuring insserv...
I: Configuring gzip...
I: Configuring libselinux1...
I: Configuring libstdc++6...
I: Configuring coreutils...
I: Configuring lzma...
I: Configuring ncurses-base...
I: Configuring ncurses-bin...
I: Configuring base-files...
I: Configuring dpkg...
I: Configuring sysvinit-utils...
I: Configuring dash...
I: Configuring perl-base...
I: Configuring libtext-iconv-perl...
I: Configuring sed...
I: Configuring liblocale-gettext-perl...
I: Configuring bash...
I: Configuring libtext-charwidth-perl...
I: Configuring libtext-wrapi18n-perl...
I: Configuring lsb-base...
I: Configuring debconf-i18n...
I: Configuring debconf...
I: Configuring libpam0g...
I: Configuring sysv-rc...
I: Configuring libpam-modules...
I: Configuring tzdata...
I: Configuring passwd...
I: Configuring libpam-runtime...
I: Configuring login...
I: Configuring libuuid1...
I: Configuring libblkid1...
I: Configuring mount...
I: Configuring initscripts...
I: Configuring util-linux...
I: Configuring sysvinit...
I: Configuring e2fsprogs...
I: Unpacking the base system...
I: Unpacking adduser...
I: Unpacking apt-utils...
I: Unpacking apt...
I: Unpacking aptitude...
I: Unpacking bsdmainutils...
I: Unpacking libbz2-1.0...
I: Unpacking cpio...
I: Unpacking cron...
I: Unpacking libcwidget3...
I: Unpacking debian-archive-keyring...
I: Unpacking dhcp3-client...
I: Unpacking dhcp3-common...
I: Unpacking dmidecode...
I: Unpacking ed...
I: Unpacking libgdbm3...
I: Unpacking gnupg...
I: Unpacking gpgv...
I: Unpacking groff-base...
I: Unpacking ifupdown...
I: Unpacking iproute...
I: Unpacking iptables...
I: Unpacking iputils-ping...
I: Unpacking logrotate...
I: Unpacking libept0...
I: Unpacking libsigc++-2.0-0c2a...
I: Unpacking libtasn1-3...
I: Unpacking libusb-0.1-4...
I: Unpacking man-db...
I: Unpacking manpages...
I: Unpacking module-init-tools...
I: Unpacking nano...
I: Unpacking libncursesw5...
I: Unpacking net-tools...
I: Unpacking netbase...
I: Unpacking netcat-traditional...
I: Unpacking libnewt0.52...
I: Unpacking whiptail...
I: Unpacking libssl0.9.8...
I: Unpacking libpopt0...
I: Unpacking procps...
I: Unpacking libreadline5...
I: Unpacking libreadline6...
I: Unpacking readline-common...
I: Unpacking rsyslog...
I: Unpacking libslang2...
I: Unpacking tasksel-data...
I: Unpacking tasksel...
I: Unpacking libwrap0...
I: Unpacking info...
I: Unpacking install-info...
I: Unpacking traceroute...
I: Unpacking libudev0...
I: Unpacking udev...
I: Unpacking vim-common...
I: Unpacking vim-tiny...
I: Unpacking wget...
I: Unpacking libxapian15...
I: Configuring the base system...
I: Configuring module-init-tools...
I: Configuring libgdbm3...
I: Configuring libtasn1-3...
I: Configuring libpopt0...
I: Configuring libusb-0.1-4...
I: Configuring install-info...
I: Configuring libssl0.9.8...
I: Configuring vim-common...
I: Configuring netbase...
I: Configuring libxapian15...
I: Configuring dmidecode...
I: Configuring libudev0...
I: Configuring adduser...
I: Configuring traceroute...
I: Configuring ed...
I: Configuring manpages...
I: Configuring iproute...
I: Configuring wget...
I: Configuring groff-base...
I: Configuring net-tools...
I: Configuring bsdmainutils...
I: Configuring libslang2...
I: Configuring libsigc++-2.0-0c2a...
I: Configuring netcat-traditional...
I: Configuring libncursesw5...
I: Configuring info...
I: Configuring iputils-ping...
I: Configuring libbz2-1.0...
I: Configuring cron...
I: Configuring nano...
I: Configuring dhcp3-common...
I: Configuring udev...
I: Configuring iptables...
I: Configuring rsyslog...
I: Configuring cpio...
I: Configuring vim-tiny...
I: Configuring readline-common...
I: Configuring libwrap0...
I: Configuring man-db...
I: Configuring procps...
I: Configuring ifupdown...
I: Configuring dhcp3-client...
I: Configuring libreadline5...
I: Configuring libreadline6...
I: Configuring logrotate...
I: Configuring libnewt0.52...
I: Configuring libcwidget3...
I: Configuring gpgv...
I: Configuring whiptail...
I: Configuring gnupg...
I: Configuring debian-archive-keyring...
I: Configuring apt...
I: Configuring libept0...
I: Configuring apt-utils...
I: Configuring aptitude...
I: Configuring tasksel-data...
I: Configuring tasksel...
I: Base system installed successfully.
P: Begin caching bootstrap stage...
P: Begin unmounting filesystems...
P: Setting up cleanup function
P: Begin caching chroot stage...
P: Begin mounting /dev/pts...
P: Begin mounting /proc...
P: Begin mounting /sys...
P: Configuring file /etc/debian_chroot
P: Configuring file /sbin/start-stop-daemon
P: Configuring file /usr/sbin/policy-rc.d
P: Configuring file /usr/sbin/initctl
P: Configuring file /etc/hosts
P: Configuring file /etc/resolv.conf
P: Configuring file /etc/hostname
P: Configuring file /bin/hostname
P: Configuring file /etc/apt/apt.conf
P: Configuring file /etc/apt/sources.list
Get:1 http://mirror.internode.on.net squeeze Release.gpg [835B]
Hit http://mirror.internode.on.net squeeze Release
Get:2 http://mirror.internode.on.net squeeze/main Packages/DiffIndex [2038B]
Get:3 http://security.debian.org squeeze/updates Release.gpg [835B]
Get:4 http://security.debian.org squeeze/updates Release [44.6kB]
Ign http://security.debian.org squeeze/updates/main Packages
Get:5 http://security.debian.org squeeze/updates/main Packages [50.6kB]
Fetched 99.0kB in 1s (79.8kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree... Done
debian-archive-keyring is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Hit http://security.debian.org squeeze/updates Release.gpg
Hit http://mirror.internode.on.net squeeze Release.gpg
Hit http://security.debian.org squeeze/updates Release
Hit http://mirror.internode.on.net squeeze Release
Ign http://security.debian.org squeeze/updates/main Packages/DiffIndex
Ign http://security.debian.org squeeze/updates/main Packages
Hit http://mirror.internode.on.net squeeze/main Packages/DiffIndex
Hit http://security.debian.org squeeze/updates/main Packages
Reading package lists... Done
P: Configuring file /etc/kernel-img.conf
P: Begin executing preseed...
P: Begin executing local preseeds...
P: Begin installing tasks...
P: Begin queueing installation of packages lists...
P: Begin queueing installation of local packages lists...
P: Begin queueing installation of packages...
P: Begin queueing installation of local packages...
P: Begin installing packages...
Reading package lists... Done
Building dependency tree... Done
The following extra packages will be installed:
busybox console-data console-terminus cryptsetup dmsetup firmware-linux-free
initramfs-tools keyboard-configuration klibc-utils libcrypt-passwdmd5-perl
libdb4.7 libdevmapper1.02.1 libklibc libmagic1 linux-image-2.6.32-3-amd64 make
perl
perl-modules rsync syslinux-common user-setup uuid-runtime xkb-data
Suggested packages:
unicode-data dosfstools cdtool setcd linux-doc-2.6.32 grub lilo
loop-aes-utils curlftpfs genext2fs httpfs2 squashfs-tools mtd-tools make-doc
perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl openssh-client
openssh-server
The following NEW packages will be installed:
busybox console-common console-data console-setup console-terminus cryptsetup
dmsetup eject extlinux file firmware-linux-free initramfs-tools kbd
keyboard-configuration klibc-utils libcrypt-passwdmd5-perl libdb4.7
libdevmapper1.02.1
libklibc libmagic1 linux-image-2.6-amd64 linux-image-2.6.32-3-amd64
live-initramfs locales make perl perl-modules rsync sudo syslinux-common
user-setup uuid-runtime xkb-data
0 upgraded, 33 newly installed, 0 to remove and 0 not upgraded.
Need to get 49.2MB of archives.
After this operation, 177MB of additional disk space will be used.
Get:1 http://mirror.internode.on.net squeeze/main console-data 2:1.10-2 [1180kB]
Get:2 http://mirror.internode.on.net squeeze/main console-terminus 4.30-2
[527kB]
Get:3 http://mirror.internode.on.net squeeze/main xkb-data 1.7-2 [850kB]
Get:4 http://mirror.internode.on.net squeeze/main keyboard-configuration 1.51
[251kB]
Get:5 http://mirror.internode.on.net squeeze/main console-setup 1.51 [500kB]
Get:6 http://mirror.internode.on.net squeeze/main kbd 1.15.1-2 [426kB]
Get:7 http://mirror.internode.on.net squeeze/main console-common 0.7.85 [128kB]
Get:8 http://mirror.internode.on.net squeeze/main libklibc 1.5.15-1 [47.4kB]
Get:9 http://mirror.internode.on.net squeeze/main klibc-utils 1.5.15-1 [187kB]
Get:10 http://mirror.internode.on.net squeeze/main initramfs-tools 0.93.4
[78.1kB]
Get:11 http://mirror.internode.on.net squeeze/main linux-image-2.6.32-3-amd64
2.6.32-9 [27.8MB]
Get:12 http://mirror.internode.on.net squeeze/main libmagic1 5.04-1 [400kB]
Get:13 http://mirror.internode.on.net squeeze/main file 5.04-1 [48.5kB]
Get:14 http://mirror.internode.on.net squeeze/main libdb4.7 4.7.25-9 [662kB]
Get:15 http://mirror.internode.on.net squeeze/main locales 2.10.2-6 [4752kB]
Get:16 http://mirror.internode.on.net squeeze/main perl-modules 5.10.1-11
[3479kB]
Get:17 http://mirror.internode.on.net squeeze/main perl 5.10.1-11 [4423kB]
Get:18 http://mirror.internode.on.net squeeze/main busybox 1:1.14.2-2 [356kB]
Get:19 http://mirror.internode.on.net squeeze/main libdevmapper1.02.1
2:1.02.39-1 [76.1kB]
Get:20 http://mirror.internode.on.net squeeze/main dmsetup 2:1.02.39-1 [50.4kB]
Get:21 http://mirror.internode.on.net squeeze/main cryptsetup 2:1.1.0~rc2-1
[365kB]
Get:22 http://mirror.internode.on.net squeeze/main eject
2.1.5+deb1+cvs20081104-7 [54.3kB]
Get:23 http://mirror.internode.on.net squeeze/main extlinux 2:3.85+dfsg-1
[55.4kB]
Get:24 http://mirror.internode.on.net squeeze/main firmware-linux-free 2.6.32-9
[127kB]
Get:25 http://mirror.internode.on.net squeeze/main libcrypt-passwdmd5-perl
1.3-9 [10.3kB]
Get:26 http://mirror.internode.on.net squeeze/main linux-image-2.6-amd64
2.6.32+25 [2846B]
Get:27 http://mirror.internode.on.net squeeze/main sudo 1.7.2p1-1.2 [321kB]
Get:28 http://mirror.internode.on.net squeeze/main user-setup 1.28 [124kB]
Get:29 http://mirror.internode.on.net squeeze/main live-initramfs 1.173.3-1
[99.7kB]
Get:30 http://mirror.internode.on.net squeeze/main make 3.81-7 [404kB]
Get:31 http://mirror.internode.on.net squeeze/main rsync 3.0.7-2 [359kB]
Get:32 http://mirror.internode.on.net squeeze/main syslinux-common
2:3.85+dfsg-1 [1031kB]
Get:33 http://mirror.internode.on.net squeeze/main uuid-runtime 2.16.2-0
[59.5kB]
Fetched 49.2MB in 12s (3792kB/s)
Extracting templates from packages: 100%
Preconfiguring packages ...
Selecting previously deselected package console-data.
(Reading database ... 8294 files and directories currently installed.)
Unpacking console-data (from .../console-data_2%3a1.10-2_all.deb) ...
Selecting previously deselected package console-terminus.
Unpacking console-terminus (from .../console-terminus_4.30-2_all.deb) ...
Selecting previously deselected package xkb-data.
Unpacking xkb-data (from .../xkb-data_1.7-2_all.deb) ...
Selecting previously deselected package keyboard-configuration.
Unpacking keyboard-configuration (from .../keyboard-configuration_1.51_all.deb)
...
Selecting previously deselected package console-setup.
Unpacking console-setup (from .../console-setup_1.51_all.deb) ...
Selecting previously deselected package kbd.
Unpacking kbd (from .../kbd_1.15.1-2_amd64.deb) ...
update-rc.d: using dependency based boot sequencing
Selecting previously deselected package console-common.
Unpacking console-common (from .../console-common_0.7.85_all.deb) ...
Selecting previously deselected package libklibc.
Unpacking libklibc (from .../libklibc_1.5.15-1_amd64.deb) ...
Selecting previously deselected package klibc-utils.
Unpacking klibc-utils (from .../klibc-utils_1.5.15-1_amd64.deb) ...
Selecting previously deselected package initramfs-tools.
Unpacking initramfs-tools (from .../initramfs-tools_0.93.4_all.deb) ...
Selecting previously deselected package linux-image-2.6.32-3-amd64.
Unpacking linux-image-2.6.32-3-amd64 (from
.../linux-image-2.6.32-3-amd64_2.6.32-9_amd64.deb) ...
Selecting previously deselected package libmagic1.
Unpacking libmagic1 (from .../libmagic1_5.04-1_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_5.04-1_amd64.deb) ...
Selecting previously deselected package libdb4.7.
Unpacking libdb4.7 (from .../libdb4.7_4.7.25-9_amd64.deb) ...
Selecting previously deselected package locales.
Unpacking locales (from .../locales_2.10.2-6_all.deb) ...
Selecting previously deselected package perl-modules.
Unpacking perl-modules (from .../perl-modules_5.10.1-11_all.deb) ...
Selecting previously deselected package perl.
Unpacking perl (from .../perl_5.10.1-11_amd64.deb) ...
Selecting previously deselected package busybox.
Unpacking busybox (from .../busybox_1%3a1.14.2-2_amd64.deb) ...
Selecting previously deselected package libdevmapper1.02.1.
Unpacking libdevmapper1.02.1 (from
.../libdevmapper1.02.1_2%3a1.02.39-1_amd64.deb) ...
Selecting previously deselected package dmsetup.
Unpacking dmsetup (from .../dmsetup_2%3a1.02.39-1_amd64.deb) ...
Selecting previously deselected package cryptsetup.
Unpacking cryptsetup (from .../cryptsetup_2%3a1.1.0~rc2-1_amd64.deb) ...
Selecting previously deselected package eject.
Unpacking eject (from .../eject_2.1.5+deb1+cvs20081104-7_amd64.deb) ...
Selecting previously deselected package extlinux.
Unpacking extlinux (from .../extlinux_2%3a3.85+dfsg-1_amd64.deb) ...
Selecting previously deselected package firmware-linux-free.
Unpacking firmware-linux-free (from .../firmware-linux-free_2.6.32-9_all.deb)
...
Selecting previously deselected package libcrypt-passwdmd5-perl.
Unpacking libcrypt-passwdmd5-perl (from
.../libcrypt-passwdmd5-perl_1.3-9_all.deb) ...
Selecting previously deselected package linux-image-2.6-amd64.
Unpacking linux-image-2.6-amd64 (from
.../linux-image-2.6-amd64_2.6.32+25_amd64.deb) ...
Selecting previously deselected package sudo.
Unpacking sudo (from .../sudo_1.7.2p1-1.2_amd64.deb) ...
Selecting previously deselected package user-setup.
Unpacking user-setup (from .../user-setup_1.28_all.deb) ...
Selecting previously deselected package live-initramfs.
Unpacking live-initramfs (from .../live-initramfs_1.173.3-1_all.deb) ...
Selecting previously deselected package make.
Unpacking make (from .../archives/make_3.81-7_amd64.deb) ...
Selecting previously deselected package rsync.
Unpacking rsync (from .../rsync_3.0.7-2_amd64.deb) ...
Selecting previously deselected package syslinux-common.
Unpacking syslinux-common (from .../syslinux-common_2%3a3.85+dfsg-1_all.deb) ...
Selecting previously deselected package uuid-runtime.
Unpacking uuid-runtime (from .../uuid-runtime_2.16.2-0_amd64.deb) ...
Processing triggers for man-db ...
Setting up console-data (2:1.10-2) ...
Looking for keymap to install:
NONE
Setting up console-terminus (4.30-2) ...
Setting up xkb-data (1.7-2) ...
Setting up keyboard-configuration (1.51) ...
Setting up console-setup (1.51) ...
Setting up kbd (1.15.1-2) ...
All runlevel operations denied by policy
Setting up libklibc (1.5.15-1) ...
Setting up klibc-utils (1.5.15-1) ...
Setting up initramfs-tools (0.93.4) ...
update-initramfs: deferring update (trigger activated)
Setting up linux-image-2.6.32-3-amd64 (2.6.32-9) ...
Running depmod.
Running update-initramfs.
update-initramfs: Generating /boot/initrd.img-2.6.32-3-amd64
cryptsetup: WARNING: could not determine root device from /etc/fstab
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/extlinux 2.6.32-3-amd64
/boot/vmlinuz-2.6.32-3-amd64
run-parts: /etc/kernel/postinst.d/extlinux exited with return code 1
Failed to process /etc/kernel/postinst.d at
/var/lib/dpkg/info/linux-image-2.6.32-3-amd64.postinst line 868.
dpkg: error processing linux-image-2.6.32-3-amd64 (--configure):
subprocess installed post-installation script returned error exit status 9
Setting up libmagic1 (5.04-1) ...
Setting up file (5.04-1) ...
Setting up libdb4.7 (4.7.25-9) ...
Setting up locales (2.10.2-6) ...
Generating locales (this might take a while)...
Generation complete.
Setting up busybox (1:1.14.2-2) ...
Setting up libdevmapper1.02.1 (2:1.02.39-1) ...
Setting up dmsetup (2:1.02.39-1) ...
update-initramfs: deferring update (trigger activated)
Setting up cryptsetup (2:1.1.0~rc2-1) ...
update-initramfs: deferring update (trigger activated)
Setting up eject (2.1.5+deb1+cvs20081104-7) ...
Setting up extlinux (2:3.85+dfsg-1) ...
Setting up firmware-linux-free (2.6.32-9) ...
dpkg: dependency problems prevent configuration of linux-image-2.6-amd64:
linux-image-2.6-amd64 depends on linux-image-2.6.32-3-amd64; however:
Package linux-image-2.6.32-3-amd64 is not configured yet.
dpkg: error processing linux-image-2.6-amd64 (--configure):
dependency problems - leaving unconfigured
Setting up sudo (1.7.2p1-1.2) ...
No /etc/sudoers found... creating one for you.
Setting up user-setup (1.28) ...
Setting up live-initramfs (1.173.3-1) ...
update-initramfs: deferring update (trigger activated)
update-rc.d: warning: live-initramfs start runlevel arguments (none) do not
match LSB Default-Start values (1 2 3 4 5)
Setting up make (3.81-7) ...
Setting up rsync (3.0.7-2) ...
update-rc.d: using dependency based boot sequencing
All runlevel operations denied by policy
Setting up syslinux-common (2:3.85+dfsg-1) ...
Setting up uuid-runtime (2.16.2-0) ...
Setting up console-common (0.7.85) ...
Looking for keymap to install:
NONE
All runlevel operations denied by policy
Setting up perl-modules (5.10.1-11) ...
Setting up perl (5.10.1-11) ...
update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename)
in auto mode.
Setting up libcrypt-passwdmd5-perl (1.3-9) ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-2.6.32-3-amd64
cryptsetup: WARNING: could not determine root device from /etc/fstab
Errors were encountered while processing:
linux-image-2.6.32-3-amd64
linux-image-2.6-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
P: Begin unmounting filesystems...
with-temp-dir: leaving directory `/tmp/with-temp-dir.0H3qEB'
Script done on Tue 16 Mar 2010 16:08:36 EST
