Hi Michael, On Fri, 12.03.2010 at 21:58:44 +0300, Michael Tokarev <m...@tls.msk.ru> wrote: > From what you provided above it sounds like some sort of i/o > problem, but without much more details (exact kvm command line, > kinds of disk devices you use, and some sorts of traces it is > impossible to say what's going on.
although my interest in KVM is waning quickly, as I really need support for other platforms as well, I've produced two dmesg files for my Lenny and Sid machines. I've done both with the old qemu-kvm package, though, and have to note that the Sid kvm does not start with the 2.6.32-3 kernel (but hangs at the tsc clocksource unstable message that you declared benign). The command lines are: --------------- cut kvm -localtime -no-acpi -m 512 \ -net nic,model=rtl8139,macaddr=52:54:00:12:34:56,vlan=0 \ -daemonize \ -net tap,vlan=0 /mounts/vmachines/kvm/d-sid/sid1.img & --------------- cut for the Sid kvm, often including '-nographic', and --------------- cut $DEBUG kvm ${IMAGE} -no-acpi -m ${RAM} -usb -localtime \ -net nic,model=rtl8139,macaddr=${MACADDR},vlan=0 \ -daemonize -nographic \ -net tap,vlan=0 $CDROM & --------------- cut for the Lenny kvm. You see some shell variables there, which I use to point to images, set the MAC address etc, but nothing magic. I'll ship more info as I make progress. Kind regards, --Toni++
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-17) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21 04:57:38 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00fbc90] 000fbc90 [ 0.000000] kvm-clock: cpu 0, msr 0:3baf81, boot clock [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131056 [ 0.000000] HighMem 131056 -> 131056 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131056 [ 0.000000] On node 0 totalpages: 131056 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321] [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: QEMUCPU Product ID: 0.1 <6>MPTABLE: Product ID: 0.1 <6>MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] I/O APIC #1 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 1 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dffbc000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] SMP: Allowing 8 CPUs, 7 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8 [ 0.000000] kvm-clock: cpu 0, msr 0:1409f81, primary cpu clock [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032 [ 0.000000] Kernel command line: root=/dev/hda1 ro quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 2310.574 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Memory: 508612k/524224k available (1769k kernel code, 15084k reserved, 751k data, 244k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba66b - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba66b (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.087985] Calibrating delay using timer specific routine.. 4632.43 BogoMIPS (lpj=9264870) [ 0.088005] Security Framework initialized [ 0.088005] SELinux: Disabled at boot. [ 0.088005] Capability LSM initialized [ 0.088005] Mount-cache hash table entries: 512 [ 0.088005] Initializing cgroup subsys ns [ 0.088005] Initializing cgroup subsys cpuacct [ 0.088005] Initializing cgroup subsys devices [ 0.088005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.088005] CPU: L2 Cache: 512K (64 bytes/line) [ 0.088005] Intel machine check architecture supported. [ 0.088005] Intel machine check reporting enabled on CPU#0. [ 0.088005] SMP alternatives: switching to UP code [ 0.581736] ACPI: Core revision 20080321 [ 0.581824] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321] [ 0.581828] ACPI: Unable to load the System Description Tables [ 0.584005] ENABLING IO-APIC IRQs [ 0.584548] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.624347] CPU0: AMD QEMU Virtual CPU version 0.11.0 stepping 03 [ 0.736031] Brought up 1 CPUs [ 0.736031] Total of 1 processors activated (4632.43 BogoMIPS). [ 0.736031] WARNING: This combination of AMDprocessors is not suitable for SMP. [ 0.736031] CPU0 attaching sched-domain: [ 0.736031] domain 0: span 0 [ 0.736031] groups: 0 [ 0.736031] net_namespace: 660 bytes [ 0.736031] Booting paravirtualized kernel on KVM [ 0.736031] NET: Registered protocol family 16 [ 0.736031] PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=0 [ 0.736031] PCI: Using configuration type 1 for base access [ 0.736031] Setting up standard PCI resources [ 0.736032] ACPI: Interpreter disabled. [ 0.736032] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.736032] pnp: PnP ACPI: disabled [ 0.736032] PnPBIOS: Disabled [ 0.736032] PCI: Probing PCI hardware [ 0.736032] PCI: Probing PCI hardware (bus 00) [ 0.745045] PCI: Using IRQ router PIIX/ICH [8086/7000] at 0000:00:01.0 [ 0.745121] PCI BIOS passed nonexistent PCI bus 0! [ 0.745147] PCI BIOS passed nonexistent PCI bus 0! [ 0.745161] PCI BIOS passed nonexistent PCI bus 0! [ 0.746736] NET: Registered protocol family 2 [ 0.746959] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.747289] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.747563] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.747827] TCP: Hash tables configured (established 16384 bind 16384) [ 0.747833] TCP reno registered [ 0.747989] NET: Registered protocol family 1 [ 0.748133] Switched to high resolution mode on CPU 0 [ 0.748228] checking if image is initramfs... it is [ 1.269384] Freeing initrd memory: 7006k freed [ 1.269714] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.270491] audit: initializing netlink socket (disabled) [ 1.270510] type=2000 audit(1268158609.268:1): initialized [ 1.271292] Total HugeTLB memory allocated, 0 [ 1.271421] VFS: Disk quotas dquot_6.5.1 [ 1.271460] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.271542] msgmni has been set to 1007 [ 1.271713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.271727] io scheduler noop registered [ 1.271729] io scheduler anticipatory registered [ 1.271731] io scheduler deadline registered [ 1.271749] io scheduler cfq registered (default) [ 1.271764] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.271795] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.272539] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.272636] pci 0000:00:02.0: Boot video device [ 1.273011] isapnp: Scanning for PnP cards... [ 1.636679] isapnp: No Plug & Play device found [ 1.640240] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.640675] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.643060] brd: module loaded [ 1.643251] PNP: No PS/2 controller found. Probing ports directly. [ 1.644129] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.644143] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.644485] mice: PS/2 mouse device common for all mice [ 1.645052] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.645073] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.645169] rtc0: alarms up to one day [ 1.645355] cpuidle: using governor ladder [ 1.645358] cpuidle: using governor menu [ 1.645361] No iBFT detected. [ 1.645830] TCP cubic registered [ 1.645833] NET: Registered protocol family 17 [ 1.645849] Using IPI No-Shortcut mode [ 1.645956] registered taskstats version 1 [ 1.646147] rtc_cmos rtc_cmos: setting system clock to 2010-03-09 19:16:48 UTC (1268162208) [ 1.646373] Freeing unused kernel memory: 244k freed [ 1.899082] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 2.597805] Uniform Multi-Platform E-IDE driver [ 2.597811] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.599033] PIIX3: IDE controller (0x8086:0x7010 rev 0x00) at PCI slot 0000:00:01.1 [ 2.599105] PIIX3: not 100% native mode: will probe irqs later [ 2.599216] PCI: Setting latency timer of device 0000:00:01.1 to 64 [ 2.599321] ide0: BM-DMA at 0xc000-0xc007 [ 2.599345] ide1: BM-DMA at 0xc008-0xc00f [ 2.599357] Probing IDE interface ide0... [ 2.666407] usbcore: registered new interface driver usbfs [ 2.666441] usbcore: registered new interface driver hub [ 2.666465] usbcore: registered new device driver usb [ 2.677384] USB Universal Host Controller Interface driver v3.0 [ 2.688365] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.888085] hda: QEMU HARDDISK, ATA DISK drive [ 3.560165] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO2 [ 3.560301] hda: MWDMA2 mode selected [ 3.560469] Probing IDE interface ide1... [ 3.960074] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 4.632149] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 4.632225] hdc: MWDMA2 mode selected [ 4.632456] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.632513] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.632857] PCI: Setting latency timer of device 0000:00:01.2 to 64 [ 4.632883] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 4.632974] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 4.633106] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020 [ 4.633240] usb usb1: configuration #1 chosen from 1 choice [ 4.633267] hub 1-0:1.0: USB hub found [ 4.633274] hub 1-0:1.0: 2 ports detected [ 4.736168] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.736172] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.736174] usb usb1: Product: UHCI Host Controller [ 4.736176] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 4.736178] usb usb1: SerialNumber: 0000:00:01.2 [ 4.742917] eth0: RTL-8139C+ at 0xe0820000, 52:54:00:12:34:55, IRQ 11 [ 4.742965] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 4.749840] 8139too Fast Ethernet driver 0.9.28 [ 4.764745] SCSI subsystem initialized [ 4.778448] libata version 3.00 loaded. [ 4.832455] hda: max request size: 512KiB [ 4.832459] hda: 20971520 sectors (10737 MB) w/256KiB Cache, CHS=16383/255/63 [ 4.832956] hda: cache flushes supported [ 4.832990] hda: hda1 hda2 < hda5 > [ 4.862492] hdc: ATAPI 4X CD-ROM drive, 512kB Cache [ 4.862505] Uniform CD-ROM driver Revision: 3.20 [ 5.205919] PM: Starting manual resume from disk [ 5.294727] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.294731] EXT3-fs: write access will be enabled during recovery. [ 11.000063] Clocksource tsc unstable (delta = -282611641 ns) [ 11.738399] kjournald starting. Commit interval 5 seconds [ 11.738399] EXT3-fs: recovery complete. [ 11.741604] EXT3-fs: mounted filesystem with ordered data mode. [ 14.313272] udevd version 125 started [ 16.014453] input: PC Speaker as /class/input/input1 [ 16.205830] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 [ 16.370013] Error: Driver 'pcspkr' is already registered, aborting... [ 18.452313] Adding 489940k swap on /dev/hda5. Priority:-1 extents:1 across:489940k [ 18.948842] EXT3 FS on hda1, internal journal [ 19.748092] loop: module loaded [ 22.403801] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (wa...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00fbc90] 000fbc90 [ 0.000000] kvm-clock: cpu 0, msr 0:3baf81, boot clock [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131056 [ 0.000000] HighMem 131056 -> 131056 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131056 [ 0.000000] On node 0 totalpages: 131056 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321] [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: QEMUCPU Product ID: 0.1 <6>MPTABLE: Product ID: 0.1 <6>MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] I/O APIC #1 Version 17 at 0xFEC00000. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Processors: 1 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dffbc000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] SMP: Allowing 8 CPUs, 7 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8 [ 0.000000] kvm-clock: cpu 0, msr 0:1409f81, primary cpu clock [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-686 root=UUID=9ac6c7a0-a9f5-444d-9701-24c0a6221d26 ro [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 2310.616 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Memory: 508996k/524224k available (1769k kernel code, 14664k reserved, 752k data, 244k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.087985] Calibrating delay using timer specific routine.. 4632.89 BogoMIPS (lpj=9265797) [ 0.088005] Security Framework initialized [ 0.088005] SELinux: Disabled at boot. [ 0.088005] Capability LSM initialized [ 0.088005] Mount-cache hash table entries: 512 [ 0.088005] Initializing cgroup subsys ns [ 0.088005] Initializing cgroup subsys cpuacct [ 0.088005] Initializing cgroup subsys devices [ 0.088005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.088005] CPU: L2 Cache: 512K (64 bytes/line) [ 0.088005] Intel machine check architecture supported. [ 0.088005] Intel machine check reporting enabled on CPU#0. [ 0.088005] SMP alternatives: switching to UP code [ 0.455484] ACPI: Core revision 20080321 [ 0.455632] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321] [ 0.455642] ACPI: Unable to load the System Description Tables [ 0.457181] ENABLING IO-APIC IRQs [ 0.457664] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.501740] CPU0: AMD QEMU Virtual CPU version 0.11.0 stepping 03 [ 0.611799] Brought up 1 CPUs [ 0.611809] Total of 1 processors activated (4632.89 BogoMIPS). [ 0.611814] WARNING: This combination of AMDprocessors is not suitable for SMP. [ 0.611974] CPU0 attaching sched-domain: [ 0.611977] domain 0: span 0 [ 0.611978] groups: 0 [ 0.612031] net_namespace: 660 bytes [ 0.612031] Booting paravirtualized kernel on KVM [ 0.612031] NET: Registered protocol family 16 [ 0.612031] PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=0 [ 0.612031] PCI: Using configuration type 1 for base access [ 0.612031] Setting up standard PCI resources [ 0.612032] ACPI: Interpreter disabled. [ 0.612032] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.612032] pnp: PnP ACPI: disabled [ 0.612032] PnPBIOS: Disabled [ 0.612032] PCI: Probing PCI hardware [ 0.612032] PCI: Probing PCI hardware (bus 00) [ 0.620031] PCI: Using IRQ router PIIX/ICH [8086/7000] at 0000:00:01.0 [ 0.620031] PCI BIOS passed nonexistent PCI bus 0! [ 0.620031] PCI BIOS passed nonexistent PCI bus 0! [ 0.621440] NET: Registered protocol family 2 [ 0.621633] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.621904] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.622111] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.622307] TCP: Hash tables configured (established 16384 bind 16384) [ 0.622313] TCP reno registered [ 0.622465] NET: Registered protocol family 1 [ 0.622632] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 0.880018] it is [ 1.136034] Freeing initrd memory: 6587k freed [ 1.136034] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.136138] audit: initializing netlink socket (disabled) [ 1.136161] type=2000 audit(1268733839.136:1): initialized [ 1.136848] Total HugeTLB memory allocated, 0 [ 1.136949] VFS: Disk quotas dquot_6.5.1 [ 1.136984] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.137062] msgmni has been set to 1007 [ 1.137231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.137250] io scheduler noop registered [ 1.137254] io scheduler anticipatory registered [ 1.137258] io scheduler deadline registered [ 1.137276] io scheduler cfq registered (default) [ 1.137290] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.137327] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.137352] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.137373] pci 0000:00:02.0: Boot video device [ 1.138633] efifb: framebuffer at 0xf0000000, mapped to 0xe0800000, using 960k, total 960k [ 1.138642] efifb: mode is 640x480x24, linelength=2048, pages=0 [ 1.138646] efifb: scrolling: redraw [ 1.138651] efifb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.142440] Console: switching to colour frame buffer device 80x30 [ 1.145255] fb0: EFI VGA frame buffer device [ 1.145401] isapnp: Scanning for PnP cards... [ 1.515549] isapnp: No Plug & Play device found [ 1.516721] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.519629] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.523479] brd: module loaded [ 1.526278] PNP: No PS/2 controller found. Probing ports directly. [ 1.530615] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.532068] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.532137] mice: PS/2 mouse device common for all mice [ 1.534286] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.536256] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.538173] rtc0: alarms up to one day [ 1.539983] cpuidle: using governor ladder [ 1.541516] cpuidle: using governor menu [ 1.542950] No iBFT detected. [ 1.545896] TCP cubic registered [ 1.547376] NET: Registered protocol family 17 [ 1.548354] Using IPI No-Shortcut mode [ 1.550409] registered taskstats version 1 [ 1.553909] rtc_cmos rtc_cmos: setting system clock to 2010-03-16 11:03:57 UTC (1268737437) [ 1.558156] Freeing unused kernel memory: 244k freed [ 2.567730] Uniform Multi-Platform E-IDE driver [ 2.570189] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.592807] 8139too Fast Ethernet driver 0.9.28 [ 2.595391] 8139too 0000:00:03.0: This (id 10ec:8139 rev 20) is an enhanced 8139C+ chip [ 2.598538] 8139too 0000:00:03.0: Use the "8139cp" driver for improved performance and stability. [ 2.602382] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 2.602436] 8139too 0000:00:03.0: unknown chip version, assuming RTL-8139 [ 2.602444] 8139too 0000:00:03.0: TxConfig = 0x74800000 [ 2.607501] eth0: RealTek RTL8139 at 0xc100, 52:54:00:12:34:56, IRQ 11 [ 2.608021] eth0: Identified 8139 chip type 'RTL-8139' [ 2.608186] PIIX3: IDE controller (0x8086:0x7010 rev 0x00) at PCI slot 0000:00:01.1 [ 2.613469] PIIX3: not 100% native mode: will probe irqs later [ 2.615714] PCI: Setting latency timer of device 0000:00:01.1 to 64 [ 2.615741] ide0: BM-DMA at 0xc000-0xc007 [ 2.617703] ide1: BM-DMA at 0xc008-0xc00f [ 2.619426] Probing IDE interface ide0... [ 2.637358] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.908137] hda: QEMU HARDDISK, ATA DISK drive [ 3.580154] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO2 [ 3.580287] hda: MWDMA2 mode selected [ 3.584341] Probing IDE interface ide1... [ 3.984089] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 4.656110] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 4.656186] hdc: MWDMA2 mode selected [ 4.659198] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.661126] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.680624] SCSI subsystem initialized [ 4.696622] libata version 3.00 loaded. [ 4.713984] hda: max request size: 512KiB [ 4.716787] hda: 20971520 sectors (10737 MB) w/256KiB Cache, CHS=16383/255/63 [ 4.719063] hda: cache flushes supported [ 4.721052] hda: hda1 hda2 < hda5 > [ 4.751653] hdc: ATAPI 4X CD-ROM drive, 512kB Cache [ 4.754355] Uniform CD-ROM driver Revision: 3.20 [ 5.121108] PM: Starting manual resume from disk [ 5.188401] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.190922] EXT3-fs: write access will be enabled during recovery. [ 6.000141] Clocksource tsc unstable (delta = -135398075 ns) [ 23.453811] kjournald starting. Commit interval 5 seconds [ 23.461116] EXT3-fs: recovery complete. [ 23.469167] EXT3-fs: mounted filesystem with ordered data mode. [ 25.304410] udev: starting version 150 [ 25.928399] input: PC Speaker as /class/input/input1 [ 26.123058] Error: Driver 'pcspkr' is already registered, aborting... [ 26.197568] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 [ 27.369022] Adding 489940k swap on /dev/hda5. Priority:-1 extents:1 across:489940k [ 102.921969] EXT3 FS on hda1, internal journal [ 103.076741] loop: module loaded [ 104.902115] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1