Package: linux-2.6 Version: 2.6.32-5 Severity: normal linux-image-2.6.31-686 works fine. If reboot to 2.6.32 X failed to start with error "no screen found"
-- Package-specific info: ** Version: Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) ([email protected]) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=23f3ae68-8897-4f68-91a2-8e7f0cfb8d8d ro quiet ** Not tainted ** Kernel log: [ 4.202019] usb 3-2: New USB device found, idVendor=045e, idProduct=0040 [ 4.202024] usb 3-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 4.202027] usb 3-2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 4.202030] usb 3-2: Manufacturer: Microsoft [ 4.202127] usb 3-2: configuration #1 chosen from 1 choice [ 4.212343] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.0/input/input0 [ 4.212413] generic-usb 0003:045E:0040.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.1-2/input0 [ 4.548167] PM: Starting manual resume from disk [ 4.575830] kjournald starting. Commit interval 5 seconds [ 4.575840] EXT3-fs: mounted filesystem with ordered data mode. [ 6.430000] udev: starting version 151 [ 7.186947] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 7.186956] ACPI: Power Button [PWRB] [ 7.187068] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 7.187073] ACPI: Power Button [PWRF] [ 7.197247] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.197642] processor LNXCPU:00: registered as cooling_device0 [ 7.203220] Linux agpgart interface v0.103 [ 7.299156] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.327609] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 7.379985] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1] [ 7.380027] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB [ 7.380032] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP [ 7.385720] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [ 7.421638] parport_pc 00:06: reported by Plug and Play ACPI [ 7.421707] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 7.436059] parport0: Printer, Hewlett-Packard HP LaserJet 6L Pro [ 7.483063] ACPI: I/O resource nForce2_smbus [0x5000-0x503f] conflicts with ACPI region SMRG [0x5000-0x5004] [ 7.483100] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.483104] nForce2_smbus 0000:00:01.1: Error probing SMB1. [ 7.483188] i2c i2c-0: nForce2 SMBus adapter at 0x5040 [ 7.497333] input: MLK rapoo 1800 as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0/input/input4 [ 7.497417] sunplus 0003:04FC:05D8.0001: input,hidraw1: USB HID v1.00 Keyboard [MLK rapoo 1800] on usb-0000:00:02.1-1/input0 [ 7.506028] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor [ 7.507587] input: MLK rapoo 1800 as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.1/input/input5 [ 7.509717] sunplus 0003:04FC:05D8.0002: input,hiddev96,hidraw2: USB HID v1.00 Mouse [MLK rapoo 1800] on usb-0000:00:02.1-1/input1 [ 8.469987] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20 [ 8.469995] Intel ICH 0000:00:06.0: PCI INT A -> Link[LAUI] -> GSI 20 (level, low) -> IRQ 20 [ 8.470031] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 8.792010] intel8x0_measure_ac97_clock: measured 54659 usecs (2680 samples) [ 8.792014] intel8x0: clocking to 46990 [ 9.020037] Adding 2714944k swap on /dev/sda5. Priority:-1 extents:1 across:2714944k [ 9.176380] EXT3 FS on sda1, internal journal [ 9.395562] ide-cd driver 5.00 [ 9.400828] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 9.463699] usbcore: registered new interface driver cdc_ether [ 9.465246] usbcore: registered new interface driver zaurus [ 9.521464] [drm] Initialized drm 1.1.0 20060810 [ 9.593799] [drm] radeon kernel modesetting enabled. [ 9.594120] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19 [ 9.594132] radeon 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 19 (level, low) -> IRQ 19 [ 9.597324] [drm] radeon: Initializing kernel modesetting. [ 9.597380] [drm] register mmio base: 0xFF580000 [ 9.597382] [drm] register mmio size: 524288 [ 9.598379] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 9.598397] agpgart-amd64 0000:00:00.0: AGP 2.0 bridge [ 9.598413] agpgart-amd64 0000:00:00.0: putting AGP V2 device into 4x mode [ 9.598443] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 9.598448] [drm] radeon: VRAM 64M [ 9.598450] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF [ 9.598452] [drm] radeon: GTT 128M [ 9.598454] [drm] radeon: GTT from 0xF0000000 to 0xF7FFFFFF [ 9.598484] [drm] radeon: irq initialized. [ 9.598642] [drm] Detected VRAM RAM=64M, BAR=128M [ 9.598646] [drm] RAM width 128bits DDR [ 9.600250] [TTM] Zone kernel: Available graphics memory: 445638 kiB. [ 9.600254] [TTM] Zone highmem: Available graphics memory: 517194 kiB. [ 9.600274] [drm] radeon: 32M of VRAM memory ready [ 9.600276] [drm] radeon: 128M of GTT memory ready. [ 9.600519] [drm] radeon: cp idle (0x00008080) [ 9.600554] [drm] Loading R100 Microcode [ 9.600808] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin [ 9.659593] [drm] radeon: ring at 0x00000000F0000000 [ 9.659619] [drm] ring test succeeded in 0 usecs [ 9.666984] [drm] radeon: ib pool ready. [ 9.667059] [drm] ib test succeeded in 0 usecs [ 9.667089] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 9.709534] vboxdrv: disagrees about version of symbol module_layout [ 10.201633] kjournald starting. Commit interval 5 seconds [ 10.201870] EXT3 FS on sda6, internal journal [ 10.201875] EXT3-fs: mounted filesystem with ordered data mode. [ 10.353557] fuse init (API version 7.13) [ 13.805546] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00) [ 13.805591] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 [ 13.805594] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 [ 13.805596] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 13.940193] Marking TSC unstable due to cpufreq changes [ 13.942011] Switching to clocksource acpi_pm [ 19.693860] Bluetooth: Core ver 2.15 [ 19.693943] NET: Registered protocol family 31 [ 19.693947] Bluetooth: HCI device and connection manager initialized [ 19.693953] Bluetooth: HCI socket layer initialized [ 19.730522] Bluetooth: L2CAP ver 2.14 [ 19.730528] Bluetooth: L2CAP socket layer initialized [ 19.856625] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.856632] Bluetooth: BNEP filters: protocol multicast [ 19.916286] Bridge firewalling registered [ 20.006184] Bluetooth: SCO (Voice Link) ver 0.6 [ 20.006190] Bluetooth: SCO socket layer initialized [ 22.952039] eth0: no IPv6 routers present ** Model information not available ** Loaded modules: Module Size Used by binfmt_misc 4875 1 sco 5837 2 bridge 32851 0 stp 996 1 bridge bnep 7376 2 l2cap 21677 3 bnep crc16 1027 1 l2cap bluetooth 36259 5 sco,bnep,l2cap rfkill 10196 2 bluetooth powernow_k8 9736 0 cpufreq_powersave 602 0 cpufreq_conservative 4018 0 cpufreq_stats 1940 0 cpufreq_userspace 1444 0 fuse 43554 10 radeon 398255 0 ttm 26008 1 radeon drm_kms_helper 17183 1 radeon drm 107507 3 radeon,ttm,drm_kms_helper i2c_algo_bit 3497 1 radeon zaurus 1880 0 cdc_ether 2633 1 zaurus usbnet 9459 2 zaurus,cdc_ether mii 2714 1 usbnet ide_generic 801 0 [permanent] ide_cd_mod 21044 0 cdrom 26487 1 ide_cd_mod snd_intel8x0 19523 0 snd_ac97_codec 79136 1 snd_intel8x0 ac97_bus 710 1 snd_ac97_codec snd_wavefront 23358 0 snd_cs4236 20131 0 snd_pcm_oss 28479 0 snd_wss_lib 16653 2 snd_wavefront,snd_cs4236 snd_opl3_lib 6022 2 snd_wavefront,snd_cs4236 snd_hwdep 4054 2 snd_wavefront,snd_opl3_lib snd_mpu401 2836 0 snd_mixer_oss 10461 1 snd_pcm_oss snd_mpu401_uart 4067 3 snd_wavefront,snd_cs4236,snd_mpu401 snd_pcm 47350 5 snd_intel8x0,snd_ac97_codec,snd_cs4236,snd_pcm_oss,snd_wss_lib snd_seq_midi 3480 0 snd_rawmidi 12313 3 snd_wavefront,snd_mpu401_uart,snd_seq_midi snd_seq_midi_event 3684 1 snd_seq_midi snd_seq 35303 3 snd_seq_midi,snd_seq_midi_event joydev 6771 0 snd_timer 12258 4 snd_wss_lib,snd_opl3_lib,snd_pcm,snd_seq hid_sunplus 981 0 snd_seq_device 3673 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq i2c_nforce2 4464 0 parport_pc 15799 0 snd 33551 17 snd_intel8x0,snd_ac97_codec,snd_wavefront,snd_cs4236,snd_pcm_oss,snd_wss_lib,snd_opl3_lib,snd_hwdep,snd_mpu401,snd_mixer_oss,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device i2c_core 12612 4 radeon,drm,i2c_algo_bit,i2c_nforce2 amd64_agp 5723 1 k8temp 2411 0 parport 22554 1 parport_pc psmouse 44409 0 pcspkr 1207 0 shpchp 21220 0 snd_page_alloc 4977 3 snd_intel8x0,snd_wss_lib,snd_pcm agpgart 19516 3 ttm,drm,amd64_agp soundcore 3450 1 snd evdev 5609 4 pci_hotplug 18065 1 shpchp serio_raw 2916 0 button 3598 0 processor 25803 1 powernow_k8 ext3 93828 2 jbd 31965 1 ext3 mbcache 3762 1 ext3 ide_gd_mod 17103 6 sd_mod 25717 4 crc_t10dif 1012 1 sd_mod usbhid 26784 0 ata_generic 2015 0 hid 50545 2 hid_sunplus,usbhid ide_pci_generic 1924 0 ohci_hcd 16804 0 sata_nv 15386 3 amd74xx 3552 5 thermal 9206 0 libata 113728 2 ata_generic,sata_nv ehci_hcd 27230 0 thermal_sys 9378 2 processor,thermal floppy 40923 0 ide_core 63850 5 ide_generic,ide_cd_mod,ide_gd_mod,ide_pci_generic,amd74xx scsi_mod 101073 2 sd_mod,libata forcedeth 40709 0 usbcore 97930 7 zaurus,cdc_ether,usbnet,usbhid,ohci_hcd,ehci_hcd nls_base 4541 1 usbcore ** PCI devices: 00:00.0 Host bridge [0600]: nVidia Corporation nForce3 250Gb Host Bridge [10de:00e1] (rev a1) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Capabilities: <access denied> Kernel driver in use: agpgart-amd64 00:01.0 ISA bridge [0601]: nVidia Corporation nForce3 250Gb LPC Bridge [10de:00e0] (rev a2) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.1 SMBus [0c05]: nVidia Corporation nForce 250Gb PCI System Management [10de:00e4] (rev a1) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at 5080 [size=32] Region 4: I/O ports at 5000 [size=64] Region 5: I/O ports at 5040 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus 00:02.0 USB Controller [0c03]: nVidia Corporation CK8S USB Controller [10de:00e7] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at ff6fd000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:02.1 USB Controller [0c03]: nVidia Corporation CK8S USB Controller [10de:00e7] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at ff6fe000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:02.2 USB Controller [0c03]: nVidia Corporation nForce3 EHCI USB 2.0 Controller [10de:00e8] (rev a2) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin C routed to IRQ 21 Region 0: Memory at ff6ffc00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:05.0 Bridge [0680]: nVidia Corporation CK8S Ethernet Controller [10de:00df] (rev a2) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:80a7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at ff6fc000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at ec00 [size=8] Capabilities: <access denied> Kernel driver in use: forcedeth 00:06.0 Multimedia audio controller [0401]: nVidia Corporation nForce3 250Gb AC'97 Audio Controller [10de:00ea] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:812a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at e800 [size=256] Region 1: I/O ports at e400 [size=128] Region 2: Memory at ff6fb000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:08.0 IDE interface [0101]: nVidia Corporation CK8S Parallel ATA Controller (v2.5) [10de:00e5] (rev a2) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: AMD_IDE 00:0a.0 IDE interface [0101]: nVidia Corporation nForce3 Serial ATA Controller [10de:00e3] (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. K8N-E [1043:813f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at 09f0 [size=8] Region 1: I/O ports at 0bf0 [size=4] Region 2: I/O ports at 0970 [size=8] Region 3: I/O ports at 0b70 [size=4] Region 4: I/O ports at c800 [size=16] Region 5: I/O ports at c400 [size=128] Capabilities: <access denied> Kernel driver in use: sata_nv 00:0b.0 PCI bridge [0604]: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge [10de:00e2] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 Bus: primary=00, secondary=01, subordinate=01, sec-latency=10 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: ff400000-ff5fffff Prefetchable memory behind bridge: deb00000-eeafffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:0e.0 PCI bridge [0604]: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge [10de:00ed] (rev a2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=128 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R100 QD [Radeon 7200] [1002:5144] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Radeon 7000/Radeon [1002:008a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at b800 [size=256] Region 2: Memory at ff580000 (32-bit, non-prefetchable) [size=512K] Expansion ROM at ff560000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon ** USB devices: Bus 003 Device 003: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical Bus 003 Device 002: ID 04fc:05d8 Sunplus Technology Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-trunk-686 (SMP w/1 CPU core) Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-trunk-686 depends on: ii debconf [debconf-2.0] 1.5.30 Debian configuration management sy ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs ii module-init-tools 3.12~pre2-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-trunk-686 recommends: ii firmware-linux-free 2.6.32-11 Binary firmware for various driver ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-trunk-686 suggests: ii grub 0.97-59 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-trunk-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.23 Binary firmware for various driver ii firmware-linux-nonfree 0.23 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information: linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686: true linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686: false linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686: true linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686: * linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
