Package: installation-reports Debian-installer-version: Debian GNU/Linux 3.1 r0a "Sarge" - Official 386 Binary-1, 2005-08-04, http://cdimage.debian.org/debian-cd/3.1_r0a/i386/iso-cd/ uname -a: Linux gucek 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005 i686 GNU/Linux Date: 2005-08-09 Method: netinst with option "linux26"
Machine: home-made komputer, based on Asus P2B (440BX) motherboard Processor: i686 Celeron (III) 950 MHz Memory: 384 MB Root Device: connected to CSA-649U Ultra IDE Controller BIOS Version 1.9.10 Root Size/partition table (I didn't know which command to use, so I used "df"): System plików bl. 1K B użyte dostępne %uż. zamont. na /dev/hdh3 4806936 1874344 2688404 42% / tmpfs 193500 0 193500 0% /dev/shm /dev/hdh1 2047904 435328 1612576 22% /mnt/hdh1 /dev/hdh4 933393 9056 874536 2% /home /dev/hde1 7496 6397 699 91% /boot /dev/hde2 7169488 5257200 1912288 74% /mnt/hde2 /dev/hde3 8217244 3967444 4249800 49% /mnt/hde3 /dev/hde5 13898664 10282616 3616048 74% /mnt/hde5 /dev/hde6 29288192 19696992 9591200 68% /mnt/hde6 tmpfs 10240 780 9460 8% /dev Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02) 0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:09.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] 0000:00:0a.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0649 (rev 02) 0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 6c) 0000:00:0c.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 03) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) 0000:00:00.0 0600: 8086:7190 (rev 02) 0000:00:01.0 0604: 8086:7191 (rev 02) 0000:00:04.0 0601: 8086:7110 (rev 02) 0000:00:04.1 0101: 8086:7111 (rev 01) 0000:00:04.2 0c03: 8086:7112 (rev 01) 0000:00:04.3 0680: 8086:7113 (rev 02) 0000:00:09.0 0401: 1274:5000 0000:00:0a.0 0104: 1095:0649 (rev 02) 0000:00:0b.0 0200: 10b7:9200 (rev 6c) 0000:00:0c.0 0400: 14f1:8800 (rev 03) 0000:01:00.0 0300: 10de:0185 (rev c1) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: This time everything was fine, thanks to help of Lennart Sorensen <[EMAIL PROTECTED]> who suggested to try installation option "linux26". In my opinion "linux26" should be a default option of installing netinst Sarge Debian, but I am just a newbie in Linux. Formerly I had a problem with my CSA-649U controller in 2.4 kernel - installation was not successful what was reported as Bug #321454. So the problem was sold in 2.6 kernel. Thanks a lot! Best regards, Maciej Słojewski -- Służbowy stacjonarny: +48 (58) 555-77-30 (8:00 - 16:00) Służbowy komóra: +48 601 403 775 Prywatny komóra: +48 609 571 748 (Plus GSM) Tlen: [EMAIL PROTECTED] GG: 3321025 Skype: maciej_slojewski
