Package: linux-2.6 Version: 2.6.32-12 Severity: serious Because of the IDE -> ATA transition for Squeeze the pata_cmd64x driver should be enabled instead of the (old) cmd64x driver. AFAIK the pata_cmd64x has been tested and is known to work correctly.
My system failed to boot after updrading to 2.6.32-12 because I had updated my bootloader config and fstab as per the debconf dialogs, but was still getting the /dev/hdX devices from the old driver. -- Package-specific info: ** Version: Linux version 2.6.32-5-sparc64 (Debian 2.6.32-12) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 Mon May 3 12:15:34 UTC 2010 ** Command line: root=/dev/hda2 ro ** Not tainted ** Kernel log: [ 34.412487] Unpacking initramfs... [ 36.425976] Freeing initrd memory: 8542k freed [ 36.428004] power: Control reg at 1fff1724000 [ 36.429219] audit: initializing netlink socket (disabled) [ 36.429481] type=2000 audit(2.160:1): initialized [ 36.430530] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 36.446641] VFS: Disk quotas dquot_6.5.2 [ 36.447294] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) [ 36.448042] msgmni has been set to 2016 [ 36.450085] alg: No test for stdrng (krng) [ 36.450673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 36.450782] io scheduler noop registered [ 36.450847] io scheduler anticipatory registered [ 36.450913] io scheduler deadline registered [ 36.451104] io scheduler cfq registered (default) [ 36.451824] atyfb: 3D RAGE II+ (Mach64 GT) [0x4754 rev 0x9a] [ 36.453534] atyfb: 2M SGRAM (1:1), 14.31818 MHz XTAL, 200 MHz PLL, 67 Mhz MCLK, 67 MHz XCLK [ 36.516048] Console: switching to colour frame buffer device 144x56 [ 36.541375] atyfb: fb0: ATY Mach64 frame buffer device on PCI [ 36.542671] /SUNW,f...@1e,0: FFB at 000001fc00000000, type 51, DAC pnum[236e] rev[10] manuf_rev[1] [ 36.556761] [drm] Initialized drm 1.1.0 20060810 [ 36.557763] /p...@1f,0/p...@1,1/e...@1/s...@14,3083f8: Keyboard port at 1fff13083f8, irq 6 [ 36.558491] /p...@1f,0/p...@1,1/e...@1/s...@14,3062f8: Mouse port at 1fff13062f8, irq 7 [ 36.559586] f0061c64: ttyS0 at MMIO 0x1fff1400000 (irq = 5) is a SAB82532 V3.2 [ 36.560168] f0061c64: ttyS1 at MMIO 0x1fff1400040 (irq = 5) is a SAB82532 V3.2 [ 36.893614] Floppy drive(s): fd0 is 1.44M [ 36.910680] FDC 0 is a National Semiconductor PC87306 [ 36.912772] Uniform Multi-Platform E-IDE driver [ 36.913344] ide-gd driver 1.18 [ 36.914572] mice: PS/2 mouse device common for all mice [ 36.916206] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0 [ 36.920416] TCP cubic registered [ 36.922175] NET: Registered protocol family 10 [ 36.927110] lo: Disabled Privacy Extensions [ 36.930640] Mobile IPv6 [ 36.930789] NET: Registered protocol family 17 [ 36.931687] registered taskstats version 1 [ 36.932518] rtc-m48t59 rtc-m48t59.0: setting system clock to 2010-05-08 17:43:06 UTC (1273340586) [ 36.932895] Initalizing network drop monitor service [ 37.102842] udev: starting version 153 [ 37.560607] PCI: Enabling device: (0000:01:01.1), cmd 2 [ 37.560667] sunhme.c:v3.10 August 26, 2008 David S. Miller (da...@davemloft.net) [ 37.567765] input: Sun Type 5 keyboard as /devices/root/f005f9c0/f00601b4/f0061504/f0063594/serio0/input/input0 [ 37.570655] input: Sun Mouse as /devices/root/f005f9c0/f00601b4/f0061504/f0064df4/serio1/input/input1 [ 37.580218] eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:9c:14:f5 [ 37.613386] cmd64x 0000:01:03.0: IDE controller (0x1095:0x0646 rev 0x03) [ 37.627752] cmd64x 0000:01:03.0: 100% native mode on irq 14 [ 37.634742] ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027 [ 37.641890] ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f [ 37.649158] Probing IDE interface ide0... [ 37.937464] hda: ST34342A, ATA DISK drive [ 38.613346] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 38.613792] hda: MWDMA2 mode selected [ 38.621602] Probing IDE interface ide1... [ 38.909368] hdc: Maxtor 6E040L0, ATA DISK drive [ 39.417005] hdd: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive [ 39.425289] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 39.425427] hdc: MWDMA2 mode selected [ 39.433355] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 39.433451] hdd: MWDMA2 mode selected [ 39.441443] ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 14 (serialized) [ 39.450618] ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 14 (serialized) [ 39.459783] hda: max request size: 128KiB [ 39.468269] hda: 8404830 sectors (4303 MB), CHS=8894/15/63 [ 39.477020] hda: cache flushes not supported [ 39.486101] hda: hda1 hda2 hda3 hda4 [ 39.521765] hdc: max request size: 128KiB [ 39.541162] hdc: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63 [ 39.550586] hdc: cache flushes supported [ 39.561151] hdc: hdc1 hdc2 hdc3 hdc4 [ 39.780787] SCSI subsystem initialized [ 39.995975] libata version 3.00 loaded. [ 40.201356] ide-cd driver 5.00 [ 40.341139] ide-cd: hdd: ATAPI 52X CD-ROM drive, 192kB Cache [ 40.350974] Uniform CD-ROM driver Revision: 3.20 [ 41.609996] kjournald starting. Commit interval 5 seconds [ 41.619585] EXT3-fs: mounted filesystem with ordered data mode. [ 47.038983] udev: starting version 153 [ 48.976719] parport0: PC-style at 0x1fff13043bc (0x1fff13047bc), irq 8 [PCSPP,TRISTATE] [ 49.099625] PCI: Enabling device: (0000:02:01.0), cmd 1 [ 49.099672] PCI parallel port detected: 1592:0782, I/O at 0x1fe02000478(0x0), IRQ 15 [ 49.099730] parport1: PC-style at 0x1fe02000478, irq 15 [PCSPP,TRISTATE,EPP] [ 49.204726] PCI parallel port detected: 1592:0782, I/O at 0x1fe02000578(0x0), IRQ 15 [ 49.204795] parport2: PC-style at 0x1fe02000578, irq 15 [PCSPP,TRISTATE,EPP] [ 54.161226] Adding 214024k swap on /dev/hda4. Priority:-1 extents:1 across:214024k [ 54.967687] EXT3 FS on hda2, internal journal [ 55.920302] loop: module loaded [ 58.453536] kjournald starting. Commit interval 5 seconds [ 58.466122] EXT3 FS on hda1, internal journal [ 58.476526] EXT3-fs: mounted filesystem with ordered data mode. [ 64.110652] eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex. [ 66.836249] RPC: Registered udp transport module. [ 66.846887] RPC: Registered tcp transport module. [ 66.857524] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 67.150709] Slow work thread pool: Starting up [ 67.161917] Slow work thread pool: Ready [ 67.174581] FS-Cache: Loaded [ 67.533204] FS-Cache: Netfs 'nfs' registered for caching [ 67.831856] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 71.289922] eth0: no IPv6 routers present ** Model information cpu : TI UltraSparc IIi (Sabre) fpu : UltraSparc IIi integrated FPU pmu : ultra12 prom : OBP 3.31.0 2001/07/25 20:36 type : sun4u ** Loaded modules: Module Size Used by nfsd 273696 2 exportfs 3090 1 nfsd nfs 256969 1 lockd 60795 2 nfsd,nfs fscache 30627 1 nfs nfs_acl 2303 2 nfsd,nfs auth_rpcgss 36297 2 nfsd,nfs sunrpc 170500 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss openpromfs 4455 1 snd_sun_cs4231 17966 0 snd_pcm 62456 1 snd_sun_cs4231 snd_seq 45280 0 snd_timer 16624 3 snd_sun_cs4231,snd_pcm,snd_seq snd_seq_device 4877 1 snd_seq snd 48758 5 snd_sun_cs4231,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 4975 1 snd snd_page_alloc 5013 2 snd_sun_cs4231,snd_pcm loop 11063 0 parport_pc 23763 0 parport 28747 1 parport_pc evdev 7935 0 ext3 124832 2 jbd 34176 1 ext3 mbcache 5131 1 ext3 ide_cd_mod 26973 0 cdrom 33647 1 ide_cd_mod ata_generic 3143 0 libata 146951 1 ata_generic scsi_mod 132085 1 libata ide_pci_generic 2964 0 cmd64x 4039 3 sunhme 25036 0 ** PCI devices: 00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Region 0: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Bus: primary=00, secondary=02, subordinate=ff, sec-latency=64 I/O behind bridge: 00000000-00000fff Memory behind bridge: 00000000-000fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- [virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1] BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort+ >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge [108e:5000] (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Region 0: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00000000-00000fff Memory behind bridge: 00000000-000fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- [virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1] BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort+ >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 01:01.0 Bridge [0680]: Sun Microsystems Computer Corp. EBUS [108e:1000] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (2500ns min, 6250ns max) Region 0: Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 1: Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Expansion ROM at fffffe0100000000 [disabled] [size=1] 01:01.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. Happy Meal 10/100 Ethernet [hme] [108e:1001] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (2500ns min, 1250ns max) Interrupt: pin ? routed to IRQ 12 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=28K] Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Expansion ROM at fffffe0100000000 [disabled] [size=1] Kernel driver in use: hme 01:02.0 VGA compatible controller [0300]: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] [1002:4754] (rev 9a) (prog-if 00 [VGA controller]) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 13 Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at fffffe0100000000 [disabled] [size=1] Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Expansion ROM at fffffe0100000000 [disabled] [size=1] Kernel driver in use: atyfb 01:03.0 IDE interface [0101]: Silicon Image, Inc. PCI0646 [1095:0646] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Silicon Image, Inc. PCI0646 [1095:0646] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 14 Region 0: I/O ports at c00000 [size=8] Region 1: I/O ports at c00008 [size=4] Region 2: I/O ports at c00010 [size=8] Region 3: I/O ports at c00018 [size=4] Region 4: I/O ports at c00020 [size=16] Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] [virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1] Kernel driver in use: CMD64x_IDE 02:01.0 Communication controller [0782]: Syba Tech Ltd Parallel Port Card 2xEPP [1592:0782] (rev 92) (prog-if 15) Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 15 Region 0: I/O ports at 0400 [size=1K] Region 1: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 2: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] [virtual] Expansion ROM at fffffe0100000000 [disabled] [size=1] Kernel driver in use: parport_pc ** USB devices: not available -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: sparc (sparc64) Kernel: Linux 2.6.32-5-sparc64 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-sparc64 depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs ii linux-base 2.6.32-12 Linux image base package ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-sparc64 recommends: pn firmware-linux-free <none> (no description available) Versions of packages linux-image-2.6.32-5-sparc64 suggests: pn fdutils <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) ii silo 1.4.14+git20100228-1 Sparc Improved LOader Versions of packages linux-image-2.6.32-5-sparc64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-sparc64/postinst/missing-firmware-2.6.32-5-sparc64: linux-image-2.6.32-5-sparc64/postinst/depmod-error-initrd-2.6.32-5-sparc64: false linux-image-2.6.32-5-sparc64/prerm/removing-running-kernel-2.6.32-5-sparc64: true linux-image-2.6.32-5-sparc64/prerm/would-invalidate-boot-loader-2.6.32-5-sparc64: true linux-image-2.6.32-5-sparc64/postinst/bootloader-error-2.6.32-5-sparc64: linux-image-2.6.32-5-sparc64/postinst/bootloader-test-error-2.6.32-5-sparc64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org