Package: dnsmasq
Version: 2.52-1
Severity: normal
I have a second IP address associated with eth0 (the "virtual address" used by
the ucarp daemon):
# ip addr show dev eth0
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UNKNOWN qlen 1000
link/ether 00:aa:bb:cc:dd:ee brd ff:ff:ff:ff:ff:ff
inet 10.0.0.11/24 brd 10.0.0.255 scope global eth0
inet 10.0.0.1/24 brd 10.0.0.255 scope global secondary eth0:ucarp
I want to use this address for dnsmasq, so I use the following config:
listen-address=127.0.0.1
listen-address=10.0.0.1
When I do this, I can get DNS service but not DHCP.
So "dig ... @10.0.0.1" works, but DHCP clients get no response.
Running
dnsmasq -d --log-dhcp
doesn't show any incoming DHCP requests.
If I just use "interface eth0" instead of the listen-address, or if I use
listen-address=10.0.0.11
(the "primary" IP address of eth0), then it works OK.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
