Package: linux-2.6 Version: 2.6.32-15 Severity: important File: linux-image-2.6.32-5
In early boot dmesg there's this (between ----). After lots of ide timeout from tthe dvd channel (on ide port). ----- [ 1.324685] irq 5: nobody cared (try booting with the "irqpoll" option) [ 1.324730] Pid: 194, comm: scsi_eh_0 Not tainted 2.6.32-5-amd64 #1 [ 1.324732] Call Trace: [ 1.324734] <IRQ> [<ffffffff810952cd>] ? __report_bad_irq+0x30/0x7d [ 1.324745] [<ffffffff8109541f>] ? note_interrupt+0x105/0x16e [ 1.324749] [<ffffffff81095b26>] ? handle_level_irq+0x80/0xc3 [ 1.324753] [<ffffffff81013957>] ? handle_irq+0x17/0x1d [ 1.324756] [<ffffffff81012fb1>] ? do_IRQ+0x57/0xb6 [ 1.324759] [<ffffffff810114d3>] ? ret_from_intr+0x0/0x11 [ 1.324762] [<ffffffff81014fa3>] ? mask_and_ack_8259A+0x0/0xca [ 1.324767] [<ffffffff81053967>] ? __do_softirq+0x6e/0x19f [ 1.324770] [<ffffffff81011cac>] ? call_softirq+0x1c/0x30 [ 1.324773] [<ffffffff81013903>] ? do_softirq+0x3f/0x7c [ 1.324776] [<ffffffff81053845>] ? irq_exit+0x36/0x76 [ 1.324779] [<ffffffff81012ffa>] ? do_IRQ+0xa0/0xb6 [ 1.324782] [<ffffffff810114d3>] ? ret_from_intr+0x0/0x11 [ 1.324784] <EOI> [<ffffffff812fa7f5>] ? _spin_unlock_irqrestore+0x8/0xe [ 1.324798] [<ffffffffa006bb64>] ? ata_exec_internal_sg+0x239/0x45b [libata] [ 1.324802] [<ffffffff8105a549>] ? del_timer_sync+0xc/0x16 [ 1.324807] [<ffffffff811946c9>] ? delay_tsc+0x30/0x73 [ 1.324813] [<ffffffffa006be09>] ? ata_exec_internal+0x83/0x92 [libata] [ 1.324820] [<ffffffffa007732c>] ? ata_sff_check_status+0x10/0x13 [libata] [ 1.324827] [<ffffffffa006c0d2>] ? ata_do_dev_read_id+0x21/0x23 [libata] [ 1.324833] [<ffffffffa006c1c8>] ? ata_dev_read_id+0xf4/0x3c2 [libata] [ 1.324839] [<ffffffffa007783c>] ? ata_sff_postreset+0x0/0x73 [libata] [ 1.324846] [<ffffffffa0074e1d>] ? ata_eh_schedule_probe+0xb3/0xe0 [libata] [ 1.324852] [<ffffffffa0075520>] ? ata_eh_recover+0x6d6/0xc2a [libata] [ 1.324856] [<ffffffff8103fe62>] ? update_curr+0xa6/0x147 [ 1.324862] [<ffffffffa007783c>] ? ata_sff_postreset+0x0/0x73 [libata] [ 1.324868] [<ffffffffa007921c>] ? ata_sff_softreset+0x0/0x130 [libata] [ 1.324873] [<ffffffffa00d3578>] ? piix_pata_prereset+0x0/0x51 [ata_piix] [ 1.324879] [<ffffffffa007921c>] ? ata_sff_softreset+0x0/0x130 [libata] [ 1.324885] [<ffffffffa007783c>] ? ata_sff_postreset+0x0/0x73 [libata] [ 1.324890] [<ffffffffa007921c>] ? ata_sff_softreset+0x0/0x130 [libata] [ 1.324894] [<ffffffffa00d3578>] ? piix_pata_prereset+0x0/0x51 [ata_piix] [ 1.324901] [<ffffffffa0075bfc>] ? ata_do_eh+0x3b/0x82 [libata] [ 1.324907] [<ffffffffa007652b>] ? ata_scsi_error+0x342/0x67a [libata] [ 1.324911] [<ffffffff81047f57>] ? finish_task_switch+0x3a/0xa7 [ 1.324919] [<ffffffffa00049dc>] ? scsi_error_handler+0x0/0x5b5 [scsi_mod] [ 1.324925] [<ffffffffa0004aea>] ? scsi_error_handler+0x10e/0x5b5 [scsi_mod] [ 1.324931] [<ffffffffa00049dc>] ? scsi_error_handler+0x0/0x5b5 [scsi_mod] [ 1.324934] [<ffffffff8106482d>] ? kthread+0x79/0x81 [ 1.324937] [<ffffffff81011baa>] ? child_rip+0xa/0x20 [ 1.324940] [<ffffffff810647b4>] ? kthread+0x0/0x81 [ 1.324943] [<ffffffff81011ba0>] ? child_rip+0x0/0x20 [ 1.324944] handlers: [ 1.324977] [<ffffffffa00d384e>] (piix_interrupt+0x0/0x192 [ata_piix]) [ 1.325076] Disabling IRQ #5 [ 1.347126] ata1.00: ATAPI: DVD-RW IDE1108, VER B018, max UDMA/66 [ 1.347150] ata1.00: limited to UDMA/33 due to 40-wire cable [ 1.352539] ata3.01: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7 [ 1.352542] ata3.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.352677] ata4.00: ATA-8: ST3500412AS, CC32, max UDMA/133 [ 1.352680] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-15) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:34:03 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e37d6da4-4a89-4425-a2d3-fe8a6d7e7c7a ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [ 287.816263] ata1.00: status: { DRDY } [ 292.856029] ata1: link is slow to respond, please be patient (ready=0) [ 297.840028] ata1: device not ready (errno=-16), forcing hardreset [ 297.840039] ata1: soft resetting link [ 298.004333] ata1.00: configured for PIO0 [ 298.324059] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 298.324066] sr 0:0:0:0: [sr0] Sense Key : Aborted Command [current] [descriptor] [ 298.324072] Descriptor sense data with sense descriptors (in hex): [ 298.324075] 72 0b 00 00 00 00 00 0e 09 0c 00 00 00 02 00 00 [ 298.324087] 00 20 00 00 a0 40 [ 298.324093] sr 0:0:0:0: [sr0] Add. Sense: No additional sense information [ 298.324099] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 40 00 [ 298.324110] end_request: I/O error, dev sr0, sector 0 [ 298.324165] Buffer I/O error on device sr0, logical block 0 [ 298.324222] Buffer I/O error on device sr0, logical block 1 [ 298.324270] Buffer I/O error on device sr0, logical block 2 [ 298.324317] Buffer I/O error on device sr0, logical block 3 [ 298.324364] Buffer I/O error on device sr0, logical block 4 [ 298.324411] Buffer I/O error on device sr0, logical block 5 [ 298.324459] Buffer I/O error on device sr0, logical block 6 [ 298.324506] Buffer I/O error on device sr0, logical block 7 [ 298.324553] Buffer I/O error on device sr0, logical block 8 [ 298.324600] Buffer I/O error on device sr0, logical block 9 [ 298.324665] ata1: EH complete [ 310.891535] Adding 3007480k swap on /dev/sdb5. Priority:-1 extents:1 across:3007480k [ 311.133516] EXT3 FS on sdb1, internal journal [ 311.256634] loop: module loaded [ 311.913794] kjournald starting. Commit interval 5 seconds [ 311.914126] EXT3 FS on sdb6, internal journal [ 311.914133] EXT3-fs: mounted filesystem with ordered data mode. [ 312.794066] fuse init (API version 7.13) [ 313.002483] r8169: eth0: link up [ 313.002492] r8169: eth0: link up [ 321.898174] Bluetooth: Core ver 2.15 [ 321.898230] NET: Registered protocol family 31 [ 321.898231] Bluetooth: HCI device and connection manager initialized [ 321.898234] Bluetooth: HCI socket layer initialized [ 322.007284] Bluetooth: L2CAP ver 2.14 [ 322.007287] Bluetooth: L2CAP socket layer initialized [ 322.303602] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 322.303605] Bluetooth: BNEP filters: protocol multicast [ 322.303802] Bluetooth: RFCOMM TTY layer initialized [ 322.303806] Bluetooth: RFCOMM socket layer initialized [ 322.303808] Bluetooth: RFCOMM ver 1.11 [ 322.538584] Bridge firewalling registered [ 322.697668] Bluetooth: SCO (Voice Link) ver 0.6 [ 322.697670] Bluetooth: SCO socket layer initialized [ 323.348600] lp0: using parport0 (interrupt-driven). [ 323.359441] ppdev: user-space parallel port driver [ 328.816111] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 328.816118] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 328.816129] ata1.00: cmd a0/00:00:00:00:10/00:00:00:00:00/a0 tag 0 pio 4096 in [ 328.816130] res 40/00:02:00:20:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 328.816133] ata1.00: status: { DRDY } [ 333.856019] ata1: link is slow to respond, please be patient (ready=0) [ 338.840028] ata1: device not ready (errno=-16), forcing hardreset [ 338.840038] ata1: soft resetting link [ 339.004376] ata1.00: configured for PIO0 [ 339.340047] ata1: EH complete [ 369.816058] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 369.816067] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 369.816085] ata1.00: cmd a0/00:00:00:00:10/00:00:00:00:00/a0 tag 0 pio 4096 in [ 369.816087] res 40/00:02:00:20:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 369.816091] ata1.00: status: { DRDY } [ 374.856031] ata1: link is slow to respond, please be patient (ready=0) [ 379.840050] ata1: device not ready (errno=-16), forcing hardreset [ 379.840061] ata1: soft resetting link [ 380.020350] ata1.00: configured for PIO0 [ 380.340073] ata1: EH complete [ 410.816053] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 410.816062] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 410.816080] ata1.00: cmd a0/00:00:00:00:10/00:00:00:00:00/a0 tag 0 pio 4096 in [ 410.816082] res 40/00:02:00:20:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 410.816087] ata1.00: status: { DRDY } [ 415.856020] ata1: link is slow to respond, please be patient (ready=0) [ 420.840060] ata1: device not ready (errno=-16), forcing hardreset [ 420.840071] ata1: soft resetting link [ 421.012367] ata1.00: configured for PIO0 [ 421.340070] ata1: EH complete [ 423.128084] __ratelimit: 22 callbacks suppressed [ 423.128090] lxsession-edit[2978] general protection ip:7fb3bf046ae9 sp:7fff64013c40 error:0 in libc-2.10.2.so[7fb3befd1000+14a000] [ 451.816066] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 451.816075] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 451.816093] ata1.00: cmd a0/00:00:00:00:10/00:00:00:00:00/a0 tag 0 pio 4096 in [ 451.816095] res 40/00:02:00:20:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 451.816100] ata1.00: status: { DRDY } [ 456.856020] ata1: link is slow to respond, please be patient (ready=0) [ 461.840043] ata1: device not ready (errno=-16), forcing hardreset [ 461.840054] ata1: soft resetting link [ 462.012369] ata1.00: configured for PIO0 [ 462.340074] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 462.340082] sr 0:0:0:0: [sr0] Sense Key : Aborted Command [current] [descriptor] [ 462.340088] Descriptor sense data with sense descriptors (in hex): [ 462.340092] 72 0b 00 00 00 00 00 0e 09 0c 00 00 00 02 00 00 [ 462.340103] 00 20 00 00 a0 40 [ 462.340109] sr 0:0:0:0: [sr0] Add. Sense: No additional sense information [ 462.340115] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 462.340126] end_request: I/O error, dev sr0, sector 0 [ 462.340133] Buffer I/O error on device sr0, logical block 0 [ 462.340152] ata1: EH complete ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1104 board_vendor: ASUSTeK Computer INC. board_name: P5LD2-SE board_version: Rev x.xx ** Loaded modules: Module Size Used by acpi_cpufreq 5555 0 cpufreq_stats 2659 0 cpufreq_powersave 902 0 cpufreq_userspace 1992 0 cpufreq_conservative 5162 0 ppdev 5030 0 lp 7462 0 sco 7209 2 bridge 39598 0 stp 1440 1 bridge bnep 9427 2 rfcomm 29581 0 l2cap 24736 6 bnep,rfcomm crc16 1319 1 l2cap bluetooth 41827 6 sco,bnep,rfcomm,l2cap rfkill 13044 2 bluetooth binfmt_misc 6431 1 fuse 50190 1 loop 11783 0 snd_hda_codec_analog 64562 1 snd_hda_intel 19907 2 snd_hda_codec 54244 2 snd_hda_codec_analog,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60471 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4400 0 snd_rawmidi 15515 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 42881 3 snd_seq_midi,snd_seq_midi_event parport_pc 18855 1 snd_timer 15582 3 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq parport 27954 3 ppdev,lp,parport_pc nvidia 10646314 28 snd 46446 14 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device i2c_i801 7830 0 soundcore 4598 1 snd snd_page_alloc 6249 2 snd_hda_intel,snd_pcm pcspkr 1699 0 rng_core 3006 0 i2c_core 15712 2 nvidia,i2c_i801 evdev 7352 11 tpm_tis 7336 0 psmouse 49777 0 button 4650 0 tpm 9917 1 tpm_tis asus_atk0110 7686 0 tpm_bios 4521 1 tpm serio_raw 3752 0 processor 30231 1 acpi_cpufreq ext3 106518 2 jbd 37085 1 ext3 mbcache 5050 1 ext3 sg 18744 0 sr_mod 12602 0 sd_mod 29777 4 crc_t10dif 1276 1 sd_mod cdrom 29415 1 sr_mod ata_generic 2983 0 uhci_hcd 18521 0 ata_piix 21012 3 thermal 11674 0 thermal_sys 11942 2 processor,thermal r8169 28877 0 mii 3210 1 r8169 ehci_hcd 31039 0 libata 133520 2 ata_generic,ata_piix usbcore 121959 3 uhci_hcd,ehci_hcd nls_base 6361 1 usbcore scsi_mod 122117 4 sg,sr_mod,sd_mod,libata ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 81) Subsystem: ASUSTeK Computer Inc. Device [1043:8178] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: ddf00000-dfffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard (Realtek ALC 882 codec) [1043:817f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at dddf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: 40000000-401fffff Prefetchable memory behind bridge: 0000000040200000-00000000403fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: dde00000-ddefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 15 Region 4: I/O ports at 6400 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 3 Region 4: I/O ports at 6800 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 14 Region 4: I/O ports at 7000 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at 7400 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 15 Region 0: Memory at dddffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000b000-0000bfff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at 9000 [size=8] Region 1: I/O ports at 8800 [size=4] Region 2: I/O ports at 8400 [size=8] Region 3: I/O ports at 8000 [size=4] Region 4: I/O ports at 7800 [size=16] Kernel driver in use: ata_piix 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:2601] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 6 Region 0: I/O ports at a800 [size=8] Region 1: I/O ports at a400 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9800 [size=4] Region 4: I/O ports at 9400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 6 Region 4: I/O ports at 0400 [size=32] 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at c800 [size=256] Region 2: Memory at ddeff000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at ddee0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 04:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:820b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at de000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at ddfe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia ** USB devices: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs ii linux-base 2.6.32-15 Linux image base package ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-15 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true * linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
