Package: wpasupplicant Version: 0.6.10-2 Severity: normal Steps to reproduce: 1) cat >> /etc/network/interfaces << EOF iface hacklab inet dhcp wpa-driver wext wpa-ssid "Langtao" wpa-psk "CENSORED" wpa-verbosity 9 wpa-debug-level 3 EOF 2) sudo ifup wlan=hacklab
Expected results: 2) wlan interface goes up and gets an IP using DHCP Actual results: 2) wlan interface does not get an IP: wpa_supplicant: wpa-driver wext wpa_supplicant: using debug level: 3 wpa_supplicant: /sbin/wpa_supplicant -s -B -P /var/run/wpa_supplicant.wlan.pid -i wlan -D wext -t -ddd -C /var/run/wpa_supplicant Starting /sbin/wpa_supplicant... ioctl[SIOCSIWESSID]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported ioctl[SIOCSIWENCODEEXT]: Operation not supported 1277831021.556575: WPS: UUID based on MAC address - hexdump(len=16): 75 0b a6 f5 64 b0 5f fa 8a 5e a7 59 cc 7e b9 df wpa_supplicant: creating sendsigs omission pidfile: /lib/init/rw/sendsigs.omit.d/wpasupplicant.wpa_supplicant.wlan.pid wpa_supplicant: ctrl_interface socket located at /var/run/wpa_supplicant/wlan wpa_supplicant: configuring network block -- 'ADD_NETWORK' command timed out. wpa_supplicant: wpa-ssid "Langtao" -- Invalid SET_NETWORK command: needs three arguments (network id, variable name, and value) wpa_supplicant: wpa-ssid "Langtao" failed! wpa_supplicant: wpa-psk ***** -- Invalid SET_NETWORK command: needs three arguments (network id, variable name, and value) wpa_supplicant: wpa-psk ***** failed! wpa_supplicant: enabling network block 'ADD_NETWORK' command timed out. -- wpa_supplicant: enabling network block 'ADD_NETWORK' command timed out. failed! Internet Systems Consortium DHCP Client V3.1.3 Copyright 2004-2009 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/wlan/00:12:cf:8e:ee:09 Sending on LPF/wlan/00:12:cf:8e:ee:09 Sending on Socket/fallback DHCPDISCOVER on wlan to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on wlan to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on wlan to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on wlan to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on wlan to 255.255.255.255 port 67 interval 10 No DHCPOFFERS received. No working leases in persistent database - sleeping. More info: 1) strace reveals that the line WPA_ID=$(wpa_cli add_network) in /etc/wpa_supplicant/function.sh sometimes sets WPA_ID to the value of "'ADD_NETWORK' command timed out." instead of the usual "0". This then causes functions.sh to run funny stuff like 10622 execve("/sbin/wpa_cli", ["/sbin/wpa_cli", "-p", "/var/run/wpa_supplicant", "-i", "wlan", "set_network", "'ADD_NETWORK'", "command", "timed", "out.", "ssid", "\"Langtao\""], [/* 14 vars */]) = 0 10627 execve("/sbin/wpa_cli", ["/sbin/wpa_cli", "-p", "/var/run/wpa_supplicant", "-i", "wlan", "set_network", "'ADD_NETWORK'", "command", "timed", "out.", "psk", "\"CENSORED\""], [/* 14 vars */]) = 0 10628 execve("/sbin/wpa_cli", ["/sbin/wpa_cli", "-p", "/var/run/wpa_supplicant", "-i", "wlan", "enable_network", "'ADD_NETWORK' command timed out."], [/* 14 vars */]) = 0 Maybe wpa_cli gets to run before wpasupplicant has managed to bind its unix socket? In any case, functions.sh should detect the case where wpa_cli fails and not try to pass its error message as an argument for other commands... 2) For now I can connect to the network using sudo killall dhclient sudo killall wpa_supplicant om wifi power 0 sleep 4 om wifi power 1 sleep 4 sudo /sbin/wpa_supplicant -B -s -P /var/run/wpa_supplicant.wlan.pid -i wlan -D wext -t -ddd -C /var/run/wpa_supplicant sleep 4 sudo wpa_cli -p /var/run/wpa_supplicant -i wlan add_network sleep 4 sudo wpa_cli -p /var/run/wpa_supplicant -i wlan set_network 0 ssid "\"Langtao\"" sleep 4 sudo wpa_cli -p /var/run/wpa_supplicant -i wlan set_network 0 psk "\"CENSORED\"" sleep 4 sudo wpa_cli -p /var/run/wpa_supplicant -i wlan enable_network 0 sleep 4 sudo dhclient -d wlan but I'd definitely want to get back to using ifup and ifdown. 3) The device is an openmoko freerunner gta02v5 running debian unstable with the following exceptions: 3.1) linux is from http://git.openmoko.org/?p=kernel.git;a=commit;h=a3587e4ed77974adfb057af261aaeea4022018e8 and uses the ar6000 kernel module for wlan 3.2) Qi (boot loader) is from http://git.openmoko.org/?p=qi.git;a=commit;h=9ef7754b8243457ce9e3edb01bb078fac1f77ac1 -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: armel (armv4tl) Kernel: Linux 2.6.29-GTA02_lindi2-andy-tracking-mokodev Locale: LANG=C, LC_CTYPE=fi_FI (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/dash Versions of packages wpasupplicant depends on: ii adduser 3.112 add and remove users and groups ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libdbus-1-3 1.2.24-1 simple interprocess messaging syst ii libnl1 1.1-5 library for dealing with netlink s ii libpcsclite1 1.5.5-3 Middleware to access a smart card ii libreadline6 6.1-3 GNU readline and history libraries ii libssl0.9.8 0.9.8o-1 SSL shared libraries ii lsb-base 3.2-23.1 Linux Standard Base 3.2 init scrip wpasupplicant recommends no packages. Versions of packages wpasupplicant suggests: pn libengine-pkcs11-openssl <none> (no description available) pn wpagui <none> (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
