Package: cdrecord
Version: 9:1.1.10-1
Severity: normal

Dear Sir,

The capacity during -atip of cdrecord is unfortunately missing. Please if 
possible could you fix this issue, with addiing it into:

cdrecord -atip

Device was not specified. Trying to find an appropriate drive...
Detected CD-R drive: /dev/cdrw
Using /dev/cdrom of unknown capabilities
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'LITE-ON '
Identification : 'DVDRW SHM-165P6S'
Revision       : 'MS0M'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
scsibus0:
        0,0,0     0) *
        0,1,0     1) 'LITE-ON ' 'DVDRW SHM-165P6S' 'MS0M' Removable CD-ROM
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *

with scanbus:

Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'LITE-ON '
Identification : 'DVDRW SHM-165P6S'
Revision       : 'MS0M'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R

Best regards


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages cdrecord depends on:
ii  debconf [debconf-2.0]         1.5.33     Debian configuration management sy
ii  wodim                         9:1.1.10-1 command line CD/DVD writing tool

cdrecord recommends no packages.

cdrecord suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]

Reply via email to