Hi, I have the same problem with my TC-261MXI (mini PC) and I managed to get more logs which seem to be informative.
I also booted from USB. I used syslinux with kernel and initrd from http://http.us.debian.org/debian/dists/lenny/main/installer-i386/current/images/netboot/debian-installer/i386/ But the workaround with vga=771 does not work for me (I got larger display, but panic still occurs). I tried to get some more info from syslogd: I booted with the following kernel parameters (immitating expert mode) priority=low vga=normal initrd=initrd.gz Then I switched to VT2 and started debugging to the second partition on USB disk: tail -n+1 -f /var/log/syslog > /dev/sda2 I confirmed to configure network devices and to start PC card services. I confirmed to use DHCP to autoconfigure the network and the progress bar went slowly to 100%. At that point, kernel panic usually happens. Alternatively, the dialog is shown, saying that autoconfiguring via DHCP failed. If I confirm to continue, kernel panic occurs; alternatively, kernel panic sometimes occurs in about 30 secs without me confirming to countinue. Unfortunately, I managed to capture syslogd messages only to the stage before I confirmed to use DHCP (and after it completes network device configuration). There were many lines of messages on VT4 just before the panic, but unfortunately this version of tail is not able to log in shorter intervals than 1 sec. But the line saying "kernel BUG at include/linux/netdevice.h:431!" could be informative, I think. Attached is the output of "lspci -vvv" and the content of /var/log/syslog 1 sec. before the panic. Best regards, Tomas "trosos" Tintera
Aug 25 20:27:38 syslogd started: BusyBox v1.10.2 Aug 25 20:27:38 kernel: klogd started: BusyBox v1.10.2 (Debian 1:1.10.2-2) Aug 25 20:27:38 kernel: [ 0.000000] Initializing cgroup subsys cpu Aug 25 20:27:38 kernel: [ 0.000000] Linux version 2.6.26-2-486 (Debian 2.6.26-23) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Jun 12 02:15:32 UTC 2010 Aug 25 20:27:38 kernel: [ 0.000000] CPU: Vendor unknown, using generic init. Aug 25 20:27:38 kernel: [ 0.000000] CPU: Your system may be unstable. Aug 25 20:27:38 kernel: [ 0.000000] BIOS-provided physical RAM map: Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) Aug 25 20:27:38 kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Aug 25 20:27:38 kernel: [ 0.000000] 512MB LOWMEM available. Aug 25 20:27:38 kernel: [ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used Aug 25 20:27:38 kernel: [ 0.000000] Zone PFN ranges: Aug 25 20:27:38 kernel: [ 0.000000] DMA 0 -> 4096 Aug 25 20:27:38 kernel: [ 0.000000] Normal 4096 -> 131072 Aug 25 20:27:38 kernel: [ 0.000000] Movable zone start PFN for each node Aug 25 20:27:38 kernel: [ 0.000000] early_node_map[1] active PFN ranges Aug 25 20:27:38 kernel: [ 0.000000] 0: 0 -> 131072 Aug 25 20:27:38 kernel: [ 0.000000] On node 0 totalpages: 131072 Aug 25 20:27:38 kernel: [ 0.000000] DMA zone: 32 pages used for memmap Aug 25 20:27:38 kernel: [ 0.000000] DMA zone: 0 pages reserved Aug 25 20:27:38 kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 Aug 25 20:27:38 kernel: [ 0.000000] Normal zone: 992 pages used for memmap Aug 25 20:27:38 kernel: [ 0.000000] Normal zone: 125984 pages, LIFO batch:31 Aug 25 20:27:38 kernel: [ 0.000000] Movable zone: 0 pages used for memmap Aug 25 20:27:38 kernel: [ 0.000000] DMI not present or invalid. Aug 25 20:27:38 kernel: [ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321] Aug 25 20:27:38 kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df000000) Aug 25 20:27:38 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Aug 25 20:27:38 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 Aug 25 20:27:38 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Aug 25 20:27:38 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Aug 25 20:27:38 kernel: [ 0.000000] Kernel command line: priority=low vga=normal initrd=initrd.gz BOOT_IMAGE=linux Aug 25 20:27:38 kernel: [ 0.000000] No local APIC present or hardware disabled Aug 25 20:27:38 kernel: [ 0.000000] mapped APIC to ffffb000 (01403000) Aug 25 20:27:38 kernel: [ 0.000000] Initializing CPU#0 Aug 25 20:27:38 kernel: [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) Aug 25 20:27:38 kernel: [ 0.000000] Detected 1000.063 MHz processor. Aug 25 20:27:38 kernel: [ 0.004000] Console: colour VGA+ 80x25 Aug 25 20:27:38 kernel: [ 0.004000] console [tty0] enabled Aug 25 20:27:38 kernel: [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Aug 25 20:27:38 kernel: [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Aug 25 20:27:38 kernel: [ 0.004000] Memory: 509724k/524288k available (1697k kernel code, 14060k reserved, 746k data, 320k init, 0k highmem) Aug 25 20:27:38 kernel: [ 0.004000] virtual kernel memory layout: Aug 25 20:27:38 kernel: [ 0.004000] fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB) Aug 25 20:27:38 kernel: [ 0.004000] vmalloc : 0xe0800000 - 0xfffb1000 ( 503 MB) Aug 25 20:27:38 kernel: [ 0.004000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) Aug 25 20:27:38 kernel: [ 0.004000] .init : 0xc0366000 - 0xc03b6000 ( 320 kB) Aug 25 20:27:38 kernel: [ 0.004000] .data : 0xc02a8475 - 0xc0363000 ( 746 kB) Aug 25 20:27:38 kernel: [ 0.004000] .text : 0xc0100000 - 0xc02a8475 (1697 kB) Aug 25 20:27:38 kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Aug 25 20:27:38 kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated Aug 25 20:27:38 kernel: [ 0.084455] Calibrating delay using timer specific routine.. 2003.50 BogoMIPS (lpj=4007010) Aug 25 20:27:38 kernel: [ 0.084770] Security Framework initialized Aug 25 20:27:38 kernel: [ 0.084871] SELinux: Disabled at boot. Aug 25 20:27:38 kernel: [ 0.084955] Capability LSM initialized Aug 25 20:27:38 kernel: [ 0.085079] Mount-cache hash table entries: 512 Aug 25 20:27:38 kernel: [ 0.085742] Initializing cgroup subsys ns Aug 25 20:27:38 kernel: [ 0.085832] Initializing cgroup subsys cpuacct Aug 25 20:27:38 kernel: [ 0.085909] Initializing cgroup subsys devices Aug 25 20:27:38 kernel: [ 0.086080] CPU: Vortex86 SoC 05/08 stepping 06 Aug 25 20:27:38 kernel: [ 0.086253] Checking 'hlt' instruction... OK. Aug 25 20:27:38 kernel: [ 0.109117] Freeing SMP alternatives: 0k freed Aug 25 20:27:38 kernel: [ 0.109200] ACPI: Core revision 20080321 Aug 25 20:27:38 kernel: [ 0.109415] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321] Aug 25 20:27:38 kernel: [ 0.109602] ACPI: Unable to load the System Description Tables Aug 25 20:27:38 kernel: [ 0.110823] net_namespace: 652 bytes Aug 25 20:27:38 kernel: [ 0.110908] Booting paravirtualized kernel on bare hardware Aug 25 20:27:38 kernel: [ 0.112007] NET: Registered protocol family 16 Aug 25 20:27:38 kernel: [ 0.113339] EISA bus registered Aug 25 20:27:38 kernel: [ 0.114242] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=0 Aug 25 20:27:38 kernel: [ 0.114328] PCI: Using configuration type 1 for base access Aug 25 20:27:38 kernel: [ 0.114412] Setting up standard PCI resources Aug 25 20:27:38 kernel: [ 0.121555] ACPI: Interpreter disabled. Aug 25 20:27:38 kernel: [ 0.121641] Linux Plug and Play Support v0.97 (c) Adam Belay Aug 25 20:27:38 kernel: [ 0.121908] pnp: PnP ACPI: disabled Aug 25 20:27:38 kernel: [ 0.121985] PnPBIOS: Scanning system for PnP BIOS support... Aug 25 20:27:38 kernel: [ 0.122129] PnPBIOS: Found PnP BIOS installation structure at 0xc00f3bf0 Aug 25 20:27:38 kernel: [ 0.122220] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x45ba, dseg 0xf0000 Aug 25 20:27:38 kernel: [ 0.126843] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver Aug 25 20:27:38 kernel: [ 0.128835] PCI: Probing PCI hardware Aug 25 20:27:38 kernel: [ 0.128916] PCI: Probing PCI hardware (bus 00) Aug 25 20:27:38 kernel: [ 0.131960] PCI: Using IRQ router default [17f3/6036] at 0000:00:07.0 Aug 25 20:27:38 kernel: [ 0.132737] system 00:00: iomem range 0x0-0x9fbff could not be reserved Aug 25 20:27:38 kernel: [ 0.132834] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved Aug 25 20:27:38 kernel: [ 0.132926] system 00:00: iomem range 0xe4000-0xfffff could not be reserved Aug 25 20:27:38 kernel: [ 0.133018] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved Aug 25 20:27:38 kernel: [ 0.133137] system 00:00: iomem range 0xff000000-0xffffffff could not be reserved Aug 25 20:27:38 kernel: [ 0.133289] system 00:08: ioport range 0x4d0-0x4d1 has been reserved Aug 25 20:27:38 kernel: [ 0.133379] system 00:08: ioport range 0xcf8-0xcff could not be reserved Aug 25 20:27:38 kernel: [ 0.133470] system 00:08: ioport range 0xfc00-0xfc0f has been reserved Aug 25 20:27:38 kernel: [ 0.133560] system 00:08: ioport range 0xa00-0xa0f has been reserved Aug 25 20:27:38 kernel: [ 0.133649] system 00:08: ioport range 0xa20-0xa2f has been reserved Aug 25 20:27:38 kernel: [ 0.133738] system 00:08: ioport range 0xa10-0xa1f has been reserved Aug 25 20:27:38 kernel: [ 0.133827] system 00:08: ioport range 0xa30-0xa3f has been reserved Aug 25 20:27:38 kernel: [ 0.133918] system 00:08: ioport range 0xa40-0xa4f has been reserved Aug 25 20:27:38 kernel: [ 0.134007] system 00:08: ioport range 0xa50-0xa5f has been reserved Aug 25 20:27:38 kernel: [ 0.134122] system 00:0c: ioport range 0xa60-0xa6f has been reserved Aug 25 20:27:38 kernel: [ 0.134231] system 00:0d: ioport range 0x3f0-0x3f5 has been reserved Aug 25 20:27:38 kernel: [ 0.136914] NET: Registered protocol family 2 Aug 25 20:27:38 kernel: [ 0.137377] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) Aug 25 20:27:38 kernel: [ 0.138517] TCP established hash table entries: 65536 (order: 7, 524288 bytes) Aug 25 20:27:38 kernel: [ 0.140332] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) Aug 25 20:27:38 kernel: [ 0.141344] TCP: Hash tables configured (established 65536 bind 65536) Aug 25 20:27:38 kernel: [ 0.141429] TCP reno registered Aug 25 20:27:38 kernel: [ 0.141767] NET: Registered protocol family 1 Aug 25 20:27:38 kernel: [ 0.142371] checking if image is initramfs... it is Aug 25 20:27:38 kernel: [ 2.554428] Freeing initrd memory: 5869k freed Aug 25 20:27:38 kernel: [ 2.556881] audit: initializing netlink socket (disabled) Aug 25 20:27:38 kernel: [ 2.557011] type=2000 audit(1282768053.555:1): initialized Aug 25 20:27:38 kernel: [ 2.557481] Total HugeTLB memory allocated, 0 Aug 25 20:27:38 kernel: [ 2.557813] VFS: Disk quotas dquot_6.5.1 Aug 25 20:27:38 kernel: [ 2.558003] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Aug 25 20:27:38 kernel: [ 2.558233] msgmni has been set to 1007 Aug 25 20:27:38 kernel: [ 2.558770] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Aug 25 20:27:38 kernel: [ 2.558893] io scheduler noop registered Aug 25 20:27:38 kernel: [ 2.558967] io scheduler anticipatory registered Aug 25 20:27:38 kernel: [ 2.559043] io scheduler deadline registered Aug 25 20:27:38 kernel: [ 2.559154] io scheduler cfq registered (default) Aug 25 20:27:38 kernel: [ 2.834256] pci 0000:00:0d.0: Boot video device Aug 25 20:27:38 kernel: [ 2.835896] isapnp: Scanning for PnP cards... Aug 25 20:27:38 kernel: [ 2.850206] Clocksource tsc unstable (delta = 235966864 ns) Aug 25 20:27:38 kernel: [ 3.188020] isapnp: No Plug & Play device found Aug 25 20:27:38 kernel: [ 3.203860] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Aug 25 20:27:38 kernel: [ 3.204667] serial8250: ttyS0 at I/O 0 Aug 25 20:27:38 kernel: x3f8 (irq = 4) is a 16550A Aug 25 20:27:38 kernel: [ 3.205310] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A Aug 25 20:27:38 kernel: [ 3.205703] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A Aug 25 20:27:38 kernel: [ 3.206924] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Aug 25 20:27:38 kernel: [ 3.207603] 00:0a: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A Aug 25 20:27:38 kernel: [ 3.208313] 00:0b: ttyS3 at I/O 0x2e8 (irq = 11) is a 16550A Aug 25 20:27:38 kernel: [ 3.217235] brd: module loaded Aug 25 20:27:38 kernel: [ 3.217795] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1 Aug 25 20:27:38 kernel: [ 3.217885] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Aug 25 20:27:38 kernel: [ 3.218781] serio: i8042 KBD port at 0x60,0x64 irq 1 Aug 25 20:27:38 kernel: [ 3.219570] mice: PS/2 mouse device common for all mice Aug 25 20:27:38 kernel: [ 3.220281] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 Aug 25 20:27:38 kernel: [ 3.220403] rtc0: alarms up to one day Aug 25 20:27:38 kernel: [ 3.221102] EISA: Probing bus 0 at eisa.0 Aug 25 20:27:38 kernel: [ 3.221265] EISA: Detected 0 cards. Aug 25 20:27:38 kernel: [ 3.221340] cpuidle: using governor ladder Aug 25 20:27:38 kernel: [ 3.221415] cpuidle: using governor menu Aug 25 20:27:38 kernel: [ 3.221501] No iBFT detected. Aug 25 20:27:38 kernel: [ 3.223511] TCP cubic registered Aug 25 20:27:38 kernel: [ 3.223589] NET: Registered protocol family 17 Aug 25 20:27:38 kernel: [ 3.223698] Using IPI Shortcut mode Aug 25 20:27:38 kernel: [ 3.224748] registered taskstats version 1 Aug 25 20:27:38 kernel: [ 3.225242] rtc_cmos 00:04: setting system clock to 2010-08-25 20:27:34 UTC (1282768054) Aug 25 20:27:38 kernel: [ 3.226573] Freeing unused kernel memory: 320k freed Aug 25 20:27:38 kernel: [ 3.252247] input: AT Translated Set 2 keyboard as /class/input/input0 Aug 25 20:27:38 kernel: [ 4.876668] <6>r6040: RDC R6040 NAPI net driver,version 0.16 (10Nov2007) Aug 25 20:27:38 kernel: [ 4.876685] Aug 25 20:27:38 kernel: [ 5.472975] usbcore: registered new interface driver usbfs Aug 25 20:27:38 kernel: [ 5.473205] usbcore: registered new interface driver hub Aug 25 20:27:38 kernel: [ 5.473499] usbcore: registered new device driver usb Aug 25 20:27:38 kernel: [ 5.485439] ehci_hcd 0000:00:0a.1: EHCI Host Controller Aug 25 20:27:38 kernel: [ 5.485875] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 Aug 25 20:27:38 kernel: [ 5.494757] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver Aug 25 20:27:38 kernel: [ 5.508251] ehci_hcd 0000:00:0a.1: irq 3, io mem 0xfebdf800 Aug 25 20:27:38 kernel: [ 5.520211] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Aug 25 20:27:38 kernel: [ 5.520740] usb usb1: configuration #1 chosen from 1 choice Aug 25 20:27:38 kernel: [ 5.520993] hub 1-0:1.0: USB hub found Aug 25 20:27:38 kernel: [ 5.521110] hub 1-0:1.0: 2 ports detected Aug 25 20:27:38 kernel: [ 5.624747] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Aug 25 20:27:38 kernel: [ 5.624854] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 25 20:27:38 kernel: [ 5.624969] usb usb1: Product: EHCI Host Controller Aug 25 20:27:38 kernel: [ 5.625047] usb usb1: Manufacturer: Linux 2.6.26-2-486 ehci_hcd Aug 25 20:27:38 kernel: [ 5.625129] usb usb1: SerialNumber: 0000:00:0a.1 Aug 25 20:27:38 kernel: [ 5.625324] ehci_hcd 0000:00:0b.1: EHCI Host Controller Aug 25 20:27:38 kernel: [ 5.625535] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 Aug 25 20:27:38 kernel: [ 5.648230] ehci_hcd 0000:00:0b.1: irq 9, io mem 0xfebdfc00 Aug 25 20:27:38 kernel: [ 5.660196] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Aug 25 20:27:38 kernel: [ 5.660647] usb usb2: configuration #1 chosen from 1 choice Aug 25 20:27:38 kernel: [ 5.660907] hub 2-0:1.0: USB hub found Aug 25 20:27:38 kernel: [ 5.661022] hub 2-0:1.0: 2 ports detected Aug 25 20:27:38 kernel: [ 5.764634] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Aug 25 20:27:38 kernel: [ 5.764732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 25 20:27:38 kernel: [ 5.764848] usb usb2: Product: EHCI Host Controller Aug 25 20:27:38 kernel: [ 5.764925] usb usb2: Manufacturer: Linux 2.6.26-2-486 ehci_hcd Aug 25 20:27:38 kernel: [ 5.765007] usb usb2: SerialNumber: 0000:00:0b.1 Aug 25 20:27:38 kernel: [ 5.765199] ohci_hcd 0000:00:0a.0: OHCI Host Controller Aug 25 20:27:38 kernel: [ 5.765406] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3 Aug 25 20:27:38 kernel: [ 5.765573] ohci_hcd 0000:00:0a.0: irq 7, io mem 0xfebdd000 Aug 25 20:27:38 kernel: [ 5.850365] usb usb3: configuration #1 chosen from 1 choice Aug 25 20:27:38 kernel: [ 5.850610] hub 3-0:1.0: USB hub found Aug 25 20:27:38 kernel: [ 5.851535] hub 3-0:1.0: 2 ports detected Aug 25 20:27:38 kernel: [ 5.952646] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Aug 25 20:27:38 kernel: [ 5.952746] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 25 20:27:38 kernel: [ 5.952861] usb usb3: Product: OHCI Host Controller Aug 25 20:27:38 kernel: [ 5.952939] usb usb3: Manufacturer: Linux 2.6.26-2-486 ohci_hcd Aug 25 20:27:38 kernel: [ 5.953021] usb usb3: SerialNumber: 0000:00:0a.0 Aug 25 20:27:38 kernel: [ 5.954424] ohci_hcd 0000:00:0b.0: OHCI Host Controller Aug 25 20:27:38 kernel: [ 5.954650] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 4 Aug 25 20:27:38 kernel: [ 5.954810] ohci_hcd 0000:00:0b.0: irq 5, io mem 0xfebde000 Aug 25 20:27:38 kernel: [ 6.038446] usb usb4: configuration #1 chosen from 1 choice Aug 25 20:27:38 kernel: [ 6.038721] hub 4-0:1.0: USB hub found Aug 25 20:27:38 kernel: [ 6.038837] hub 4-0:1.0: 2 ports detected Aug 25 20:27:38 kernel: [ 6.140741] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Aug 25 20:27:38 kernel: [ 6.140847] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 25 20:27:38 kernel: [ 6.140964] usb usb4: Product: OHCI Host Controller Aug 25 20:27:38 kernel: [ 6.141041] usb usb4: Manufacturer: Linux 2.6.26-2-486 ohci_hcd Aug 25 20:27:38 kernel: [ 6.141123] usb usb4: SerialNumber: 0000:00:0b.0 Aug 25 20:27:38 kernel: [ 6.276294] usb 3-2: new full speed USB device using ohci_hcd and address 2 Aug 25 20:27:38 kernel: [ 6.483524] usb 3-2: configuration #1 chosen from 1 choice Aug 25 20:27:38 kernel: [ 6.485990] usb 3-2: New USB device found, idVendor=10d6, idProduct=1100 Aug 25 20:27:38 kernel: [ 6.486090] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2 Aug 25 20:27:38 kernel: [ 6.486178] usb 3-2: Product: USB MASS STORAGE CLASS Aug 25 20:27:38 kernel: [ 6.486270] usb 3-2: SerialNumber: USB MASS STORAGE CLASS Aug 25 20:27:38 kernel: [ 6.655468] SCSI subsystem initialized Aug 25 20:27:38 kernel: [ 6.677341] Initializing USB Mass Storage driver... Aug 25 20:27:38 kernel: [ 6.680301] scsi0 : SCSI emulation for USB Mass Storage devices Aug 25 20:27:38 kernel: [ 6.680844] usbcore: registered new interface driver usb-storage Aug 25 20:27:38 kernel: [ 6.680951] USB Mass Storage support registered. Aug 25 20:27:38 kernel: [ 6.684908] usb-storage: device found at 2 Aug 25 20:27:38 kernel: [ 6.684929] usb-storage: waiting for device to settle before scanning Aug 25 20:27:38 kernel: [ 6.956916] thermal: Unknown symbol acpi_processor_set_thermal_limit Aug 25 20:27:40 frontend: Setting debconf/priority to low Aug 25 20:27:41 kernel: [ 10.580990] vga16fb: initializing Aug 25 20:27:41 kernel: [ 10.581014] vga16fb: mapped to 0xc00a0000 Aug 25 20:27:41 kernel: [ 10.676995] Console: switching to colour frame buffer device 80x30 Aug 25 20:27:41 kernel: [ 10.689029] fb0: VGA16 VGA frame buffer device Aug 25 20:27:42 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Aug 25 20:27:42 net/hw-detect.hotplug: Detected hotpluggable network interface lo Aug 25 20:27:42 kernel: [ 11.685370] usb-storage: device scan complete Aug 25 20:27:42 kernel: [ 11.690346] scsi scan: INQUIRY result too short (5), using 36 Aug 25 20:27:42 kernel: [ 11.690378] scsi 0:0:0:0: Direct-Access Acer MP120 FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS Aug 25 20:27:44 kernel: [ 12.756836] Driver 'sd' needs updating - please use bus_type methods Aug 25 20:27:44 kernel: [ 12.765292] sd 0:0:0:0: [sda] 968097 512-byte hardware sectors (496 MB) Aug 25 20:27:44 kernel: [ 12.770275] sd 0:0:0:0: [sda] Write Protect is off Aug 25 20:27:44 kernel: [ 12.770296] sd 0:0:0:0: [sda] Mode Sense: 00 c0 00 00 Aug 25 20:27:44 kernel: [ 12.770311] sd 0:0:0:0: [sda] Assuming drive cache: write through Aug 25 20:27:44 kernel: [ 12.784267] sd 0:0:0:0: [sda] 968097 512-byte hardware sectors (496 MB) Aug 25 20:27:44 kernel: [ 12.789270] sd 0:0:0:0: [sda] Write Protect is off Aug 25 20:27:44 kernel: [ 12.789292] sd 0:0:0:0: [sda] Mode Sense: 00 c0 00 00 Aug 25 20:27:44 kernel: [ 12.789306] sd 0:0:0:0: [sda] Assuming drive cache: write through Aug 25 20:27:44 kernel: [ 12.789331] sda: Aug 25 20:27:44 kernel: sda1 sda2 Aug 25 20:27:44 kernel: [ 12.800642] sd 0:0:0:0: [sda] Attached SCSI removable disk Aug 25 20:27:45 init: init: starting pid 992, tty '': '/sbin/reopen-console /sbin/debian-installer' Aug 25 20:27:45 init: init: starting pid 1004, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog' Aug 25 20:27:47 debconf: Setting debconf/language to en Aug 25 20:27:47 main-menu[1015]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Aug 25 20:27:47 main-menu[1015]: DEBUG: resolver (libc6): package doesn't exist (ignored) Aug 25 20:27:54 init: init: starting pid 995, tty '/dev/tty2': '-/bin/sh' Aug 25 20:28:57 main-menu[1015]: INFO: Menu item 'localechooser' selected Aug 25 20:28:58 debconf: Setting debconf/language to en Aug 25 20:28:59 localechooser: info: Language = 'en' Aug 25 20:28:59 localechooser: info: line=en;0;US;en_US.UTF-8;;kbd=lat0-sun16(utf8) Aug 25 20:28:59 localechooser: info: Set debian-installer/language = 'en' Aug 25 20:28:59 localechooser: info: Set debian-installer/locale = 'en_US.UTF-8' Aug 25 20:28:59 localechooser: info: Set debian-installer/fallbacklocale = 'en_US.UTF-8' Aug 25 20:28:59 localechooser: info: Default country = 'US' Aug 25 20:28:59 localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)' Aug 25 20:28:59 debconf: Setting debconf/language to en Aug 25 20:29:00 localechooser: info: Set debian-installer/country = 'US' Aug 25 20:29:00 localechooser: info: Set debian-installer/locale = 'en_US.UTF-8' Aug 25 20:29:04 localechooser: info: Selected locale (debian-installer/locale) = 'en_US.UTF-8' Aug 25 20:29:14 main-menu[1015]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Aug 25 20:29:14 main-menu[1015]: DEBUG: resolver (libc6): package doesn't exist (ignored) Aug 25 20:29:15 main-menu[1015]: INFO: Menu item 'kbd-chooser' selected Aug 25 20:29:15 main-menu[1015]: INFO: Falling back to the package description for console-keymaps-at Aug 25 20:29:15 main-menu[1015]: INFO: Falling back to the package description for console-keymaps-at Aug 25 20:29:15 kbd-chooser[1764]: DEBUG: Mounting usbdevfs to look for kbd Aug 25 20:29:15 kbd-chooser[1764]: DEBUG: Parsing /proc/bus/usb/devices Aug 25 20:29:15 kbd-chooser[1764]: DEBUG: Adding generic entry for AT keymaps Aug 25 20:29:15 kbd-chooser[1764]: INFO: keyboard type at: present: true: Aug 25 20:29:15 kbd-chooser[1764]: INFO: keyboard type at: present: unknown Aug 25 20:29:15 kbd-chooser[1764]: INFO: Setting debian-installer/serial-console to false Aug 25 20:29:15 kbd-chooser[1764]: INFO: Setting debian-installer/uml-console to false Aug 25 20:29:16 kbd-chooser[1764]: INFO: kbd-chooser: arch at selected Aug 25 20:29:19 kbd-chooser[1764]: INFO: choose_keymap: keymap = cz-lat2 Aug 25 20:29:19 kbd-chooser[1764]: INFO: kbd_chooser: setting keymap cz-lat2 Aug 25 20:29:19 main-menu[1015]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Aug 25 20:29:19 main-menu[1015]: DEBUG: resolver (libc6): package doesn't exist (ignored) Aug 25 20:29:20 main-menu[1015]: INFO: Menu item 'ethdetect' selected Aug 25 20:29:21 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Aug 25 20:29:21 net/hw-detect.hotplug: Detected hotpluggable network interface lo Aug 25 20:29:26 hw-detect: Loading PCMCIA bridge driver module: i82365 Aug 25 20:29:26 kernel: [ 114.863720] Intel ISA PCIC probe: not found. Aug 25 20:29:26 hw-detect: FATAL: Error inserting i82365 (/lib/modules/2.6.26-2-486/kernel/drivers/pcmcia/i82365.ko): No such device Aug 25 20:29:26 apt-install: Queueing package udev for later installation Aug 25 20:29:26 apt-install: Queueing package usbutils for later installation Aug 25 20:29:26 apt-install: Queueing package eject for later installation Aug 25 20:29:28 check-missing-firmware: no missing firmware in /tmp/missing-firmware Aug 25 20:29:29 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Aug 25 20:29:29 net/hw-detect.hotplug: Detected hotpluggable network interface lo Aug 25 20:29:31 kernel: [ 119.760970] ------------[ cut here ]------------ Aug 25 20:29:31 kernel: [ 119.760994] WARNING: at arch/x86/kernel/pci-dma.c:488 dma_free_coherent+0x42/0xa4() Aug 25 20:29:31 kernel: [ 119.761010] Modules linked in: rsrc_nonstatic pcmcia_core sd_mod vga16fb vgastate thermal_sys usb_storage scsi_mod ohci_hcd ehci_hcd usbcore r6040 mii Aug 25 20:29:31 kernel: [ 119.761072] Pid: 2796, comm: ip Not tainted 2.6.26-2-486 #1 Aug 25 20:29:31 kernel: [ 119.761091] [<c011bb38>] warn_on_slowpath+0x40/0x65 Aug 25 20:29:31 kernel: [ 119.761124] [<c0116dd5>] dequeue_entity+0x13/0x9b Aug 25 20:29:31 kernel: [ 119.761152] [<c0116cc6>] __dequeue_entity+0x1f/0x71 Aug 25 20:29:31 kernel: [ 119.761176] [<c0102932>] __switch_to+0xc2/0xf7 Aug 25 20:29:31 kernel: [ 119.761207] [<c01630cd>] free_block+0xb8/0xf4 Aug 25 20:29:31 kernel: [ 119.761245] [<c01ce436>] memmove+0xe/0x22 Aug 25 20:29:31 kernel: [ 119.761278] [<c0106e66>] dma_free_coherent+0x42/0xa4 Aug 25 20:29:31 kernel: [ 119.761306] [<e080cba9>] r6040_close+0xce/0x10e [r6040] Aug 25 20:29:31 kernel: [ 119.761351] [<c0250cf2>] dev_close+0x57/0x6e Aug 25 20:29:31 kernel: [ 119.761380] [<c0250b9e>] dev_change_flags+0x91/0x13a Aug 25 20:29:31 kernel: [ 119.761404] [<c02888a9>] devinet_ioctl+0x232/0x52d Aug 25 20:29:31 kernel: [ 119.761439] [<c0246d99>] sock_ioctl+0x19f/0x1c1 Aug 25 20:29:31 kernel: [ 119.761465] [<c0246bfa>] sock_ioctl+0x0/0x1c1 Aug 25 20:29:31 kernel: [ 119.761486] [<c016f386>] vfs_ioctl+0x16/0x49 Aug 25 20:29:31 kernel: [ 119.761510] [<c016f59c>] do_vfs_ioctl+0x1e3/0x1f6 Aug 25 20:29:31 kernel: [ 119.761533] [<c016f5f0>] sys_ioctl+0x41/0x59 Aug 25 20:29:31 kernel: [ 119.761555] [<c01037c2>] syscall_call+0x7/0xb Aug 25 20:29:31 kernel: [ 119.761586] ======================= Aug 25 20:29:31 kernel: [ 119.761599] ---[ end trace 42522550034076bd ]--- Aug 25 20:29:31 kernel: [ 119.761621] ------------[ cut here ]------------ Aug 25 20:29:31 kernel: [ 119.761635] WARNING: at arch/x86/kernel/pci-dma.c:488 dma_free_coherent+0x42/0xa4() Aug 25 20:29:31 kernel: [ 119.761650] Modules linked in: rsrc_nonstatic pcmcia_core sd_mod vga16fb vgastate thermal_sys usb_storage scsi_mod ohci_hcd ehci_hcd usbcore r6040 mii Aug 25 20:29:31 kernel: [ 119.761707] Pid: 2796, comm: ip Tainted: G W 2.6.26-2-486 #1 Aug 25 20:29:31 kernel: [ 119.761723] [<c011bb38>] warn_on_slowpath+0x40/0x65 Aug 25 20:29:31 kernel: [ 119.761752] [<c0116dd5>] dequeue_entity+0x13/0x9b Aug 25 20:29:31 kernel: [ 119.761775] [<c0116cc6>] __dequeue_entity+0x1f/0x71 Aug 25 20:29:31 kernel: [ 119.761799] [<c0102932>] __switch_to+0xc2/0xf7 Aug 25 20:29:31 kernel: [ 119.761830] [<c01630cd>] free_block+0xb8/0xf4 Aug 25 20:29:31 kernel: [ 119.761860] [<c01ce436>] memmove+0xe/0x22 Aug 25 20:29:31 kernel: [ 119.761886] [<c0106e66>] dma_free_coherent+0x42/0xa4 Aug 25 20:29:31 kernel: [ 119.761913] [<e080cbd5>] r6040_close+0xfa/0x10e [r6040] Aug 25 20:29:31 kernel: [ 119.761946] [<c0250cf2>] dev_close+0x57/0x6e Aug 25 20:29:31 kernel: [ 119.761968] [<c0250b9e>] dev_change_flags+0x91/0x13a Aug 25 20:29:31 kernel: [ 119.761992] [<c02888a9>] devinet_ioctl+0x232/0x52d Aug 25 20:29:31 kernel: [ 119.762024] [<c0246d99>] sock_ioctl+0x19f/0x1c1 Aug 25 20:29:31 kernel: [ 119.762046] [<c0246bfa>] sock_ioctl+0x0/0x1c1 Aug 25 20:29:31 kernel: [ 119.762067] [<c016f386>] vfs_ioctl+0x16/0x49 Aug 25 20:29:31 kernel: [ 119.762087] [<c016f59c>] do_vfs_ioctl+0x1e3/0x1f6 Aug 25 20:29:31 kernel: [ 119.762110] [<c016f5f0>] sys_ioctl+0x41/0x59 Aug 25 20:29:31 kernel: [ 119.762131] [<c01037c2>] syscall_call+0x7/0xb Aug 25 20:29:31 kernel: [ 119.762160] ======================= Aug 25 20:29:31 kernel: [ 119.762172] ---[ end trace 42522550034076bd ]--- Aug 25 20:29:32 check-missing-firmware: no missing firmware in /tmp/missing-firmware Aug 25 20:29:32 main-menu[1015]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored) Aug 25 20:29:32 main-menu[1015]: DEBUG: resolver (libc6): package doesn't exist (ignored) Aug 25 20:29:37 main-menu[1015]: INFO: Menu item 'netcfg' selected Aug 25 20:29:46 dhclient: Internet Systems Consortium DHCP Client V3.1.1 Aug 25 20:29:46 dhclient: Copyright 2004-2008 Internet Systems Consortium. Aug 25 20:29:46 dhclient: All rights reserved. Aug 25 20:29:46 dhclient: For info, please visit http://www.isc.org/sw/dhcp/ Aug 25 20:29:46 dhclient: Aug 25 20:29:46 kernel: [ 135.196236] ------------[ cut here ]------------ Aug 25 20:29:46 kernel: [ 135.196265] kernel BUG at include/linux/netdevice.h:431! Aug 25 20:29:46 kernel: [ 135.196280] invalid opcode: 0000 [#1] Aug 25 20:29:46 kernel: [ 135.196292] Modules linked in: rsrc_nonstatic pcmcia_core sd_mod vga16fb vgastate thermal_sys usb_storage scsi_mod ohci_hcd ehci_hcd usbcore r6040 mii Aug 25 20:29:46 kernel: [ 135.196345] Aug 25 20:29:46 kernel: [ 135.196362] Pid: 2839, comm: ip Tainted: G W (2.6.26-2-486 #1) Aug 25 20:29:46 kernel: [ 135.196379] EIP: 0060:[<e080cf76>] EFLAGS: 00000246 CPU: 0 Aug 25 20:29:46 kernel: [ 135.196420] EIP is at r6040_open+0x282/0x2c8 [r6040] Aug 25 20:29:46 kernel: [ 135.196436] EAX: df4c6c28 EBX: 0001de00 ECX: 0001de40 EDX: 0000de40 Aug 25 20:29:46 kernel: [ 135.196454] ESI: df4c6ba0 EDI: df4c6800 EBP: df4c6ba0 ESP: de745ecc Aug 25 20:29:46 kernel: [ 135.196472] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Aug 25 20:29:46 kernel: [ 135.196490] Process ip (pid: 2839, ti=de744000 task=df4e2550 task.ti=de744000) Aug 25 20:29:46 kernel: [ 135.196504] Stack: 00000000 df4c6800 00001003 00001002 00000000 c0251c64 df4c6800 c0250b9e Aug 25 20:29:46 kernel: [ 135.196538] 00000000 de27dc01 de27dce0 df4c6800 c02888a9 de745f2c bfffd9e8 00008914 Aug 25 20:29:46 kernel: [ 135.196571] c040d080 de27dcec 00000000 00000000 30687465 00000000 00000000 00000000 Aug 25 20:29:46 kernel: [ 135.196603] Call Trace: Aug 25 20:29:46 kernel: [ 135.196617] [<c0251c64>] dev_open+0x63/0x93 Aug 25 20:29:46 kernel: [ 135.196651] [<c0250b9e>] dev_change_flags+0x91/0x13a Aug 25 20:29:46 kernel: [ 135.196676] [<c02888a9>] devinet_ioctl+0x232/0x52d Aug 25 20:29:46 kernel: [ 135.196710] [<c0246d99>] sock_ioctl+0x19f/0x1c1 Aug 25 20:29:46 kernel: [ 135.196737] [<c0246bfa>] sock_ioctl+0x0/0x1c1 Aug 25 20:29:46 kernel: [ 135.196758] [<c016f386>] vfs_ioctl+0x16/0x49 Aug 25 20:29:46 kernel: [ 135.196782] [<c016f59c>] do_vfs_ioctl+0x1e3/0x1f6 Aug 25 20:29:46 kernel: [ 135.196806] [<c016f5f0>] sys_ioctl+0x41/0x59 Aug 25 20:29:46 kernel: [ 135.196827] [<c01037c2>] syscall_call+0x7/0xb Aug 25 20:29:46 kernel: [ 135.196862] ======================= Aug 25 20:29:46 kernel: [ 135.196872] Code: 89 d8 68 f0 01 00 00 e8 12 f1 ff ff b8 11 00 00 00 8d 53 40 e8 1c 3e 9c df 8d 85 88 00 00 00 83 c4 10 f6 85 90 00 00 00 01 75 04 <0f> 0b eb fe 0f ba 70 08 00 0f ba 77 2c 00 c7 45 0c cc c7 80 e0 Aug 25 20:29:46 kernel: [ 135.197016] EIP: [<e080cf76>] r6040_open+0x282/0x2c8 [r6040] SS:ESP 0068:de745ecc Aug 25 20:29:46 kernel: [ 135.197054] ---[ end trace 42522550034076bd ]---
00:00.0 Host bridge: RDC Semiconductor, Inc. Device 6021 (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 00:07.0 ISA bridge: RDC Semiconductor, Inc. Device 6036 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=?? >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:08.0 Ethernet controller: RDC Semiconductor, Inc. R6040 MAC Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 6 Region 0: I/O ports at de00 [size=256] Region 1: Memory at febdf400 (32-bit, non-prefetchable) [size=256] Expansion ROM at febc0000 [disabled] [size=64K] Kernel driver in use: r6040 Kernel modules: r6040 00:0a.0 USB Controller: RDC Semiconductor, Inc. R6060 USB 1.1 Controller (rev 12) (prog-if 10) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 7 Region 0: Memory at febdd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:0a.1 USB Controller: RDC Semiconductor, Inc. R6061 USB 2.0 Controller (rev 03) (prog-if 20) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 3 Region 0: Memory at febdf800 (32-bit, non-prefetchable) [size=256] Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:0b.0 USB Controller: RDC Semiconductor, Inc. R6060 USB 1.1 Controller (rev 12) (prog-if 10) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at febde000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 00:0b.1 USB Controller: RDC Semiconductor, Inc. R6061 USB 2.0 Controller (rev 03) (prog-if 20) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 128, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 9 Region 0: Memory at febdfc00 (32-bit, non-prefetchable) [size=256] Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:0c.0 IDE interface: RDC Semiconductor, Inc. Device 1011 (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: RDC Semiconductor, Inc. Device 1011 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 16 bytes Interrupt: pin A routed to IRQ 14 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ef00 [size=16] 00:0d.0 VGA compatible controller: RDC Semiconductor, Inc. Device 2010 Subsystem: RDC Semiconductor, Inc. Device 2010 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 0 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M] Region 1: Memory at febe0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at df80 [size=128] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-