Package: udisks Version: 1.0.1+git20100614-3 Severity: minor 1. Insert a new flash drive from EMtec, ref. C250. 2. An error message appears telling that it is impossible to mount this device because of bad permissions. 3. Unplug the device. 4. Insert again and all work fine.
Dmesg : [ 132.712050] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 132.846946] usb 1-4: New USB device found, idVendor=13fe, idProduct=3100 [ 132.846955] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 132.846960] usb 1-4: Product: USB DISK 2.0 [ 132.846963] usb 1-4: Manufacturer: [ 132.846967] usb 1-4: SerialNumber: 07A20507830F7FC9 [ 132.849192] usb 1-4: configuration #1 chosen from 1 choice [ 132.940170] Initializing USB Mass Storage driver... [ 132.944117] scsi2 : SCSI emulation for USB Mass Storage devices [ 132.944511] usbcore: registered new interface driver usb-storage [ 132.944517] USB Mass Storage support registered. [ 132.952432] usb-storage: device found at 2 [ 132.952437] usb-storage: waiting for device to settle before scanning [ 137.956045] usb-storage: device scan complete [ 137.974479] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 137.977844] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 138.870356] sd 2:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 138.873891] sd 2:0:0:0: [sdc] Write Protect is off [ 138.873897] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 138.873901] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 138.882336] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 138.882346] sdc: sdc1 [ 138.916111] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 138.916122] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 300.729353] usb 1-4: USB disconnect, address 2 [ 306.688026] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 306.822853] usb 1-4: New USB device found, idVendor=13fe, idProduct=3100 [ 306.822860] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 306.822865] usb 1-4: Product: USB DISK 2.0 [ 306.822869] usb 1-4: Manufacturer: [ 306.822872] usb 1-4: SerialNumber: 07A20507830F7FC9 [ 306.825151] usb 1-4: configuration #1 chosen from 1 choice [ 306.836156] scsi3 : SCSI emulation for USB Mass Storage devices [ 306.838788] usb-storage: device found at 3 [ 306.838793] usb-storage: waiting for device to settle before scanning [ 311.837297] usb-storage: device scan complete [ 311.855624] scsi 3:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 311.859246] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 312.753157] sd 3:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 312.756648] sd 3:0:0:0: [sdc] Write Protect is off [ 312.756656] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 312.756661] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 312.765638] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 312.765650] sdc: sdc1 [ 312.788571] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 312.788585] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 313.322005] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! lsusb -d 13fe:3100 Bus 001 Device 003: ID 13fe:3100 Kingston Technology Company Inc. 2 GB USB stick Reported size here is wrong : it should be 4GB (other issue is declared in Debian Bug system). -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages udisks depends on: ii dbus 1.2.24-3 simple interprocess messaging syst ii libatasmart4 0.17+git20100219-2 ATA S.M.A.R.T. reading and parsing ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib ii libdbus-1-3 1.2.24-3 simple interprocess messaging syst ii libdbus-glib-1-2 0.88-2 simple interprocess messaging syst ii libdevmapper1.02.1 2:1.02.48-3 The Linux Kernel Device Mapper use ii libglib2.0-0 2.24.2-1 The GLib library of C routines ii libgudev-1.0-0 160-1 GObject-based wrapper library for ii libparted0debian1 2.3-2 The GNU Parted disk partitioning s ii libpolkit-backend-1-0 0.96-3 PolicyKit backend API ii libpolkit-gobject-1-0 0.96-3 PolicyKit Authorization API ii libsgutils2-2 1.29-1 utilities for devices using the SC ii libudev0 160-1 libudev shared library ii udev 160-1 /dev/ and hotplug management daemo Versions of packages udisks recommends: ii dosfstools 3.0.9-1 utilities for making and checking ii hdparm 9.27-2.1 tune hard disk parameters for high ii mtools 4.0.12-1 Tools for manipulating MSDOS files ii ntfs-3g 1:2010.3.6-1 read-write NTFS driver for FUSE ii ntfsprogs 2.0.0-1+b1 tools for doing neat things in NTF ii policykit-1 0.96-3 framework for managing administrat Versions of packages udisks suggests: pn cryptsetup <none> (no description available) pn mdadm <none> (no description available) pn reiserfsprogs <none> (no description available) pn xfsprogs <none> (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
