Package: linux-2.6 Version: 2.6.32-27 Severity: important If the kernel is used for paravirtual DomU, then the DomU is normally started orshutdown. Ifthe xm save and xm restore is invoked explicitely,then the DomU also restores normally. Only in the case the DomU is restored automatically via xendomains script facility on Dom0 start it is restored, so visible in the list (xm list), but also after a lot of time it does not consume any processor time (shows always 0.0 as consumed processor time) and after switch to the instance (xm console) the console is not responding to any key. The same problem was (at least) also in the package version 2.6.32-25 and 2.6.32-23. If starting the same DomU with kernel from package version 2.6.32-21, then it works correctly
-- Package-specific info: ** Version: Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-27) (m...@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sat Oct 30 17:04:10 UTC 2010 ** Command line: root=/dev/sda1 ro console=tty0 vga=773 swiotlb=65536 ** Not tainted ** Kernel log: [ 78.883733] vif8.1: no IPv6 routers present [ 79.151732] vif8.2: no IPv6 routers present [ 80.575300] device vif10.0 entered promiscuous mode [ 80.579516] perbr: port 5(vif10.0) entering learning state [ 83.099729] locbr: port 1(vif8.1) entering forwarding state [ 83.435229] tap8.1: no IPv6 routers present [ 83.487745] perbr: port 1(vif8.2) entering forwarding state [ 83.655218] tap8.2: no IPv6 routers present [ 83.791158] alloc irq_desc for 1210 on node 0 [ 83.791162] alloc kstat_irqs on node 0 [ 84.043221] tap8.0: no IPv6 routers present [ 84.131388] device tap10.0 entered promiscuous mode [ 84.132646] perbr: port 6(tap10.0) entering learning state [ 84.181362] alloc irq_desc for 1209 on node 0 [ 84.181365] alloc kstat_irqs on node 0 [ 84.607717] vif9.0: no IPv6 routers present [ 84.699718] vif9.2: no IPv6 routers present [ 84.905506] vif9.1: no IPv6 routers present [ 85.075718] vif9.3: no IPv6 routers present [ 86.209157] vif9.6: no IPv6 routers present [ 86.212755] vif9.4: no IPv6 routers present [ 86.239161] vif9.5: no IPv6 routers present [ 88.245200] locbr: port 2(tap8.1) entering forwarding state [ 88.259224] perbr: port 2(tap8.2) entering forwarding state [ 88.647215] tap9.2: no IPv6 routers present [ 88.983212] tap9.1: no IPv6 routers present [ 89.264206] tap9.6: no IPv6 routers present [ 89.275208] tap9.3: no IPv6 routers present [ 89.339202] tap9.0: no IPv6 routers present [ 89.451215] perbr: port 3(vif9.0) entering forwarding state [ 89.519208] devhazbr: port 1(vif9.1) entering forwarding state [ 89.555234] tap9.5: no IPv6 routers present [ 89.560204] tap9.4: no IPv6 routers present [ 89.599212] devsafebr: port 3(vif9.2) entering forwarding state [ 89.967706] tsthazbr: port 1(vif9.3) entering forwarding state [ 90.147225] tstsafebr: port 1(vif9.4) entering forwarding state [ 90.303212] prodhazbr: port 1(vif9.5) entering forwarding state [ 90.513625] prodsafebr: port 6(vif9.6) entering forwarding state [ 91.207274] vif10.0: no IPv6 routers present [ 93.451213] perbr: port 4(tap9.0) entering forwarding state [ 93.463200] devhazbr: port 2(tap9.1) entering forwarding state [ 93.475204] devsafebr: port 4(tap9.2) entering forwarding state [ 93.488702] tsthazbr: port 2(tap9.3) entering forwarding state [ 93.665415] tstsafebr: port 2(tap9.4) entering forwarding state [ 93.675194] prodhazbr: port 2(tap9.5) entering forwarding state [ 93.675199] prodsafebr: port 7(tap9.6) entering forwarding state [ 94.351238] tap10.0: no IPv6 routers present [ 95.580705] perbr: port 5(vif10.0) entering forwarding state [ 99.127185] perbr: port 6(tap10.0) entering forwarding state [ 188.551522] prodsafebr: port 2(vif4.0) entering disabled state [ 188.567361] prodsafebr: port 2(vif4.0) entering disabled state [ 191.152151] device vif11.0 entered promiscuous mode [ 191.156126] prodsafebr: port 2(vif11.0) entering learning state [ 192.262854] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 192.329113] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 201.855967] vif11.0: no IPv6 routers present [ 206.154960] prodsafebr: port 2(vif11.0) entering forwarding state [ 758.603354] psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 2 bytes away. [ 760.095479] psmouse.c: resync failed, issuing reconnect request [ 1038.325725] prodsafebr: port 2(vif11.0) entering disabled state [ 1038.337513] prodsafebr: port 2(vif11.0) entering disabled state [ 1040.199589] device vif12.0 entered promiscuous mode [ 1040.203589] prodsafebr: port 2(vif12.0) entering learning state [ 1041.523037] blkback: ring-ref 770, event-channel 9, protocol 1 (x86_64-abi) [ 1041.594397] blkback: ring-ref 771, event-channel 10, protocol 1 (x86_64-abi) [ 1050.517183] vif12.0: no IPv6 routers present [ 1055.201170] prodsafebr: port 2(vif12.0) entering forwarding state [ 1921.350497] prodsafebr: port 2(vif12.0) entering disabled state [ 1921.362225] prodsafebr: port 2(vif12.0) entering disabled state [ 1924.161006] device vif13.0 entered promiscuous mode [ 1924.164900] prodsafebr: port 2(vif13.0) entering learning state [ 1924.848952] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 1924.911654] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 1934.542445] vif13.0: no IPv6 routers present [ 1939.162447] prodsafebr: port 2(vif13.0) entering forwarding state [ 2441.036988] psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. [ 3522.095864] prodsafebr: port 2(vif13.0) entering disabled state [ 3522.117854] prodsafebr: port 2(vif13.0) entering disabled state [ 3526.169073] device vif14.0 entered promiscuous mode [ 3526.176916] prodsafebr: port 2(vif14.0) entering learning state [ 3527.970429] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 3528.003303] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 3536.756647] vif14.0: no IPv6 routers present [ 3541.172643] prodsafebr: port 2(vif14.0) entering forwarding state [ 4272.117683] prodsafebr: port 2(vif14.0) entering disabled state [ 4272.133477] prodsafebr: port 2(vif14.0) entering disabled state [ 4274.282190] device vif15.0 entered promiscuous mode [ 4274.285999] prodsafebr: port 2(vif15.0) entering learning state [ 4274.998943] blkback: ring-ref 770, event-channel 9, protocol 1 (x86_64-abi) [ 4275.051862] blkback: ring-ref 771, event-channel 10, protocol 1 (x86_64-abi) [ 4285.108130] vif15.0: no IPv6 routers present [ 4289.284121] prodsafebr: port 2(vif15.0) entering forwarding state [ 4421.632525] prodsafebr: port 2(vif15.0) entering disabled state [ 4421.644260] prodsafebr: port 2(vif15.0) entering disabled state [ 4423.455405] device vif16.0 entered promiscuous mode [ 4423.459100] prodsafebr: port 2(vif16.0) entering learning state [ 4424.771009] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 4424.835549] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 4433.531967] vif16.0: no IPv6 routers present [ 4438.461454] prodsafebr: port 2(vif16.0) entering forwarding state ** Model information sys_vendor: HP product_name: ProLiant DL320 G6 product_version: chassis_vendor: HP chassis_version: bios_vendor: HP bios_version: W07 ** Loaded modules: Module Size Used by tun 10908 22 xt_tcpudp 2319 111 xt_physdev 1508 25 iptable_filter 2258 1 ip_tables 13899 1 iptable_filter x_tables 12845 3 xt_tcpudp,xt_physdev,ip_tables xen_evtchn 4339 11 xenfs 9600 1 cpufreq_stats 2659 0 cpufreq_conservative 5162 0 cpufreq_userspace 1992 0 cpufreq_powersave 902 0 sg 18760 0 fuse 50289 1 nfsd 254182 13 exportfs 3170 1 nfsd nfs 241066 0 lockd 57603 2 nfsd,nfs fscache 29834 1 nfs nfs_acl 2031 2 nfsd,nfs auth_rpcgss 33476 2 nfsd,nfs sunrpc 161221 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss bridge 39662 0 stp 1440 1 bridge loop 11799 0 radeon 573452 0 ttm 40034 1 radeon drm_kms_helper 20065 1 radeon drm 143377 3 radeon,ttm,drm_kms_helper radeonfb 52374 1 fb_ddc 1421 1 radeonfb i2c_algo_bit 4225 2 radeon,radeonfb hpilo 6268 0 ipmi_si 30960 0 psmouse 49777 0 i2c_core 15712 6 radeon,drm_kms_helper,drm,radeonfb,fb_ddc,i2c_algo_bit ipmi_msghandler 26634 1 ipmi_si shpchp 26264 0 hpwdt 4916 0 pcspkr 1699 0 pci_hotplug 21203 1 shpchp serio_raw 3752 0 evdev 7352 4 container 2389 0 button 4650 0 processor 35781 0 acpi_processor 5087 1 processor,[permanent] ext3 106518 1 jbd 37085 1 ext3 mbcache 5050 1 ext3 dm_mod 53770 57 ses 5128 0 enclosure 5503 1 ses sd_mod 29777 3 crc_t10dif 1276 1 sd_mod usbhid 33292 0 hid 62857 1 usbhid ata_generic 3015 0 uhci_hcd 18521 0 aacraid 59779 4 ata_piix 21124 0 tg3 95727 0 libphy 14054 1 tg3 ehci_hcd 31135 0 libata 133616 2 ata_generic,ata_piix usbcore 121938 4 usbhid,uhci_hcd,ehci_hcd nls_base 6377 1 usbcore thermal 11674 0 scsi_mod 122117 5 sg,ses,sd_mod,aacraid,libata thermal_sys 11942 2 processor,thermal ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port [8086:3403] (rev 13) Subsystem: Hewlett-Packard Company Device [103c:330b] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0 Memory behind bridge: fbe00000-fbffffff Prefetchable memory behind bridge: 0000000080000000-00000000800fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=09, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 Host bridge [0600]: Intel Corporation Device [8086:343a] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0d.1 Host bridge [0600]: Intel Corporation Device [8086:343b] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0d.2 Host bridge [0600]: Intel Corporation Device [8086:343c] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0d.3 Host bridge [0600]: Intel Corporation Device [8086:343d] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0d.4 Host bridge [0600]: Intel Corporation 5520/5500/X58 Physical Layer Port 0 [8086:3418] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0d.5 Host bridge [0600]: Intel Corporation 5520/5500 Physical Layer Port 1 [8086:3419] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0d.6 Host bridge [0600]: Intel Corporation Device [8086:341a] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0e.0 Host bridge [0600]: Intel Corporation Device [8086:341c] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0e.1 Host bridge [0600]: Intel Corporation Device [8086:341d] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0e.2 Host bridge [0600]: Intel Corporation Device [8086:341e] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0e.3 Host bridge [0600]: Intel Corporation Device [8086:341f] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:0e.4 Host bridge [0600]: Intel Corporation Device [8086:3439] (rev 13) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259]) Subsystem: Device [003c:000b] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259]) Subsystem: Device [003c:000b] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259]) Subsystem: Device [003c:000b] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 23 Region 4: I/O ports at 1020 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 1040 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at fbaf0000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 Memory behind bridge: fbd00000-fbdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=06, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1060 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 23 Region 4: I/O ports at 1080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 10a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at fbae0000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 00002000-00003fff Memory behind bridge: fbb00000-fbcfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 10c0 [size=8] Region 1: I/O ports at 10c8 [size=4] Region 2: I/O ports at 10d0 [size=8] Region 3: I/O ports at 10d8 [size=4] Region 4: I/O ports at 10e0 [size=16] Region 5: I/O ports at 10f0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) Subsystem: Hewlett-Packard Company Device [103c:330d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 1400 [size=8] Region 1: I/O ports at 1408 [size=4] Region 2: I/O ports at 1410 [size=8] Region 3: I/O ports at 1418 [size=4] Region 4: I/O ports at 1420 [size=16] Region 5: I/O ports at 1430 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix 01:03.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:31fb] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 3000 [size=256] Region 2: Memory at fbcf0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at fbb00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeonfb Kernel modules: radeonfb, radeon 01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:3305] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at 2800 [size=256] Region 1: Memory at fbce0000 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> Kernel driver in use: hpwdt Kernel modules: hpwdt 01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 03) Subsystem: Hewlett-Packard Company Device [103c:3305] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 22 BIST result: 00 Region 0: I/O ports at 3400 [size=256] Region 1: Memory at fbcd0000 (32-bit, non-prefetchable) [size=2K] Region 2: Memory at fbcc0000 (32-bit, non-prefetchable) [size=16K] Region 3: Memory at fbc00000 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at fbb20000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: hpilo Kernel modules: hpilo 01:04.4 USB Controller [0c03]: Hewlett-Packard Company Proliant iLO2/iLO3 virtual USB controller [103c:3300] (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:3305] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at 3800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 01:04.6 IPMI SMIC interface [0c07]: Hewlett-Packard Company Proliant iLO2 virtual UART [103c:3302] (prog-if 01) Subsystem: Hewlett-Packard Company Device [103c:3305] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 21 Region 0: Memory at fbbf0000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ipmi_si Kernel modules: ipmi_si 02:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 Memory behind bridge: fbd00000-fbdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel modules: shpchp 03:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet [14e4:1678] (rev a3) Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter [103c:703e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 1250 Region 0: Memory at fbdf0000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at fbde0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 03:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet [14e4:1678] (rev a3) Subsystem: Hewlett-Packard Company NC326i PCIe Dual Port Gigabit Server Adapter [103c:703e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fbdd0000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at fbdc0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 0d:00.0 RAID bus controller [0104]: Adaptec AAC-RAID [9005:0285] (rev 09) Subsystem: Adaptec ASR-2405 [9005:02d5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at fbe00000 (64-bit, non-prefetchable) [size=2M] [virtual] Expansion ROM at 80000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: aacraid Kernel modules: aacraid ** Sound cards: -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-xen-amd64 depends on: ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy ii initramfs-tools 0.98.5 tools for generating an initramfs ii linux-base 2.6.32-27 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-xen-amd64 recommends: ii firmware-linux-free 2.6.32-27 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-xen-amd64 suggests: ii grub-legacy [grub] 0.97-63 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-xen-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) ii xen-hypervisor-4.0-amd64 [xen 4.0.1-1 The Xen Hypervisor on AMD64 -- debconf information: linux-image-2.6.32-5-xen-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-xen-amd64: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-5-xen-amd64/postinst/bootloader-test-error-2.6.32-5-xen-amd64: linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64: linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: true linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: false * linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64: linux-image-2.6.32-5-xen-amd64/postinst/bootloader-error-2.6.32-5-xen-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org