Package: linux-2.6 Version: 2.6.32-15~bpo50+1 Severity: normal File: linux-image-2.6.32-bpo.5
Sound module which is unusable. Any playback starts OK, but gets interrupted with hissing/ticking by other activity. Moving windows, disk activity, etc cause sound interruptions up to a couple of seconds in length. With "hands off" there is the occasional hiss-n-tick I have tried both the AOA and powermac sound modules. AOA does not detect the onboard sound card. Powermac detects it, but hisses/ticks. I am observing the same with 2.6.26 and with 2.6.32 from backports. -- Package-specific info: ** Version: Linux version 2.6.32-bpo.5-powerpc (Debian 2.6.32-15~bpo50+1) (norb...@tretkowski.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Sat Jun 12 11:36:21 UTC 2010 ** Command line: root=/dev/hda4 ro ** Not tainted ** Kernel log: [ 119.408798] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 119.634006] eth1: Lucent/Agere firmware doesn't support manual roaming [ 119.705128] eth1: New link status: Connected (0001) [ 119.705685] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 128.768782] tun: Universal TUN/TAP device driver, 1.6 [ 128.768793] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 128.771214] tun0: Disabled Privacy Extensions [ 130.690459] eth1: no IPv6 routers present [ 192.420338] eth1: New link status: AP Out of Range (0004) [ 192.476681] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 [ 192.476723] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31 [ 192.522927] eth1: New link status: AP In Range (0005) [ 192.577697] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 [ 192.991053] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input5 [ 309.309899] eth1: New link status: AP Out of Range (0004) [ 310.245024] eth1: New link status: AP In Range (0005) [ 453.575083] eth1: New link status: AP Out of Range (0004) [ 453.673571] eth1: New link status: AP In Range (0005) [ 463.199890] eth1: New link status: AP Out of Range (0004) [ 463.298378] eth1: New link status: AP In Range (0005) [ 914.766359] eth1: New link status: AP Out of Range (0004) [ 914.867941] eth1: New link status: AP In Range (0005) [ 1760.135494] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input6 [ 2101.517585] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2101.811146] eth1: New link status: Connected (0001) [ 2101.811702] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 2107.495653] eth1: New link status: Disconnected (0002) [ 2108.696631] eth1: New link status: Connected (0001) [ 2112.075720] eth1: no IPv6 routers present [ 2112.875570] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2113.011062] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2113.250253] eth1: Lucent/Agere firmware doesn't support manual roaming [ 2113.941866] eth1: New link status: Connected (0001) [ 2113.942576] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 2119.300944] eth1: New link status: Disconnected (0002) [ 2120.489911] eth1: New link status: Connected (0001) [ 2123.945793] eth1: no IPv6 routers present [ 2139.908804] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2140.086915] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2140.347740] eth1: Lucent/Agere firmware doesn't support manual roaming [ 2140.589689] eth1: New link status: Connected (0001) [ 2140.590395] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 2146.189335] eth1: New link status: Disconnected (0002) [ 2147.406630] eth1: New link status: Connected (0001) [ 2151.312134] eth1: no IPv6 routers present [ 2304.962355] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2305.191994] eth1: New link status: Connected (0001) [ 2305.192556] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 2310.687020] eth1: New link status: Disconnected (0002) [ 2312.007900] eth1: New link status: Connected (0001) [ 2315.490011] eth1: no IPv6 routers present [ 2316.217673] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 2316.426840] usb 2-1: New USB device found, idVendor=19d2, idProduct=0103 [ 2316.426856] usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 2316.426866] usb 2-1: Product: ZTE WCDMA Technologies MSM [ 2316.426874] usb 2-1: Manufacturer: ZTE,Incorporated [ 2316.426882] usb 2-1: SerialNumber: P673A3H3GD010000 [ 2316.428864] usb 2-1: configuration #1 chosen from 1 choice [ 2317.081553] Initializing USB Mass Storage driver... [ 2317.084319] scsi0 : SCSI emulation for USB Mass Storage devices [ 2317.086268] usbcore: registered new interface driver usb-storage [ 2317.086278] USB Mass Storage support registered. [ 2317.093232] usb-storage: device found at 2 [ 2317.093239] usb-storage: waiting for device to settle before scanning [ 2318.651190] usb 2-1: USB disconnect, address 2 [ 2319.080219] usb 2-1: new full speed USB device using ohci_hcd and address 3 [ 2319.288884] usb 2-1: New USB device found, idVendor=19d2, idProduct=0031 [ 2319.288901] usb 2-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 2319.288911] usb 2-1: Product: ZTE WCDMA Technologies MSM [ 2319.288919] usb 2-1: Manufacturer: ZTE,Incorporated [ 2319.288927] usb 2-1: SerialNumber: P673A3H3GD010000 [ 2319.290741] usb 2-1: configuration #1 chosen from 1 choice [ 2319.304228] scsi1 : SCSI emulation for USB Mass Storage devices [ 2319.308738] usb-storage: device found at 3 [ 2319.308749] usb-storage: waiting for device to settle before scanning [ 2320.229962] usbcore: registered new interface driver usbserial [ 2320.230965] USB Serial support registered for generic [ 2320.232204] usbcore: registered new interface driver usbserial_generic [ 2320.232214] usbserial: USB Serial Driver core [ 2320.307550] USB Serial support registered for GSM modem (1-port) [ 2320.309373] option 2-1:1.0: GSM modem (1-port) converter detected [ 2320.315602] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 2320.315700] option 2-1:1.1: GSM modem (1-port) converter detected [ 2320.316925] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 2320.317178] option 2-1:1.3: GSM modem (1-port) converter detected [ 2320.323223] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2 [ 2320.323338] usbcore: registered new interface driver option [ 2320.323345] option: v0.7.2:USB Driver for GSM modems [ 2322.058583] PPP generic driver version 2.4.2 [ 2324.306480] usb-storage: device scan complete [ 2324.310490] scsi 1:0:0:0: CD-ROM HSPA USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 2324.314459] scsi 1:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 [ 2325.283274] sr0: scsi-1 drive [ 2325.283563] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2325.326476] sd 1:0:0:1: [sda] Attached SCSI removable disk [ 2325.928054] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 2325.929657] sd 1:0:0:1: Attached scsi generic sg1 type 0 [ 2335.158569] eth1: New link status: AP Out of Range (0004) [ 2370.505850] eth1: New link status: Disconnected (0002) [ 2374.612937] eth1: New link status: Connected (0001) ** Model information revision : 3.2 (pvr 8001 0302) platform : PowerMac model : PowerBook3,5 machine : PowerBook3,5 motherboard : PowerBook3,5 MacRISC2 MacRISC Power Macintosh ** Loaded modules: Module Size Used by ppp_async 11149 1 crc_ccitt 4487 1 ppp_async sg 24599 0 sd_mod 34307 0 crc_t10dif 4500 1 sd_mod sr_mod 17530 0 ppp_generic 25734 5 ppp_async slhc 7871 1 ppp_generic option 19267 1 usbserial 32062 3 option usb_storage 40294 0 snd_powermac 57683 1 snd_pcm_oss 42143 0 snd_mixer_oss 19030 1 snd_pcm_oss snd_pcm 65009 2 snd_powermac,snd_pcm_oss snd_seq_midi 8208 0 snd_rawmidi 21199 1 snd_seq_midi snd_seq_midi_event 7956 1 snd_seq_midi snd_seq 51369 2 snd_seq_midi,snd_seq_midi_event snd_timer 20908 2 snd_pcm,snd_seq snd_seq_device 8413 3 snd_seq_midi,snd_rawmidi,snd_seq snd 52651 10 snd_powermac,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8003 1 snd snd_page_alloc 9061 1 snd_pcm tun 15360 2 radeon 690264 2 ttm 46812 1 radeon drm_kms_helper 24333 1 radeon drm 142443 5 radeon,ttm,drm_kms_helper xt_tcpudp 5511 1 nf_conntrack_ipv4 13409 1 nf_defrag_ipv4 4391 1 nf_conntrack_ipv4 xt_state 4551 1 iptable_filter 5502 1 ip_tables 13570 1 iptable_filter x_tables 14599 3 xt_tcpudp,xt_state,ip_tables nf_conntrack_ftp 8541 0 nf_conntrack 53009 3 nf_conntrack_ipv4,xt_state,nf_conntrack_ftp rfcomm 37810 2 l2cap 32868 9 rfcomm crc16 4475 1 l2cap bluetooth 52378 4 rfcomm,l2cap lp 10975 0 parport 32295 1 lp autofs4 25251 3 cpufreq_stats 5840 0 cpufreq_conservative 8952 0 cpufreq_userspace 5164 1 cpufreq_ondemand 10789 0 cpufreq_powersave 4138 0 nfsd 244076 13 exportfs 6650 1 nfsd nfs 269452 0 lockd 65459 2 nfsd,nfs fscache 36019 1 nfs nfs_acl 5635 2 nfsd,nfs auth_rpcgss 36672 2 nfsd,nfs sunrpc 173547 11 nfsd,nfs,lockd,nfs_acl,auth_rpcgss firewire_sbp2 16027 0 scsi_mod 126878 5 sg,sd_mod,sr_mod,usb_storage,firewire_sbp2 loop 15937 0 michael_mic 5246 4 airport 6597 0 orinoco 61239 1 airport cfg80211 117593 1 orinoco rfkill 18010 2 bluetooth,cfg80211 evdev 11760 9 yenta_socket 24451 0 rsrc_nonstatic 11368 1 yenta_socket pcmcia_core 30631 2 yenta_socket,rsrc_nonstatic ext3 124788 1 jbd 40879 1 ext3 mbcache 8286 1 ext3 ide_cd_mod 28561 0 cdrom 36699 2 sr_mod,ide_cd_mod ohci_hcd 35296 0 firewire_ohci 26008 0 firewire_core 44122 2 firewire_sbp2,firewire_ohci crc_itu_t 4495 1 firewire_core sungem 30897 0 sungem_phy 12982 1 sungem usbcore 131864 5 option,usbserial,usb_storage,ohci_hcd nls_base 8693 1 usbcore i2c_powermac 6651 0 ** PCI devices: 0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 AGP [106b:002d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Capabilities: <access denied> Kernel driver in use: agpgart-uninorth 0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] [1002:4c66] (rev 01) (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] [1002:4c66] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 255 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at 0400 [size=256] Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at b0020000 [size=128K] Capabilities: <access denied> Kernel driver in use: radeonfb Kernel modules: radeon 0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 PCI [106b:002e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes 0001:10:17.0 Class [ff00]: Apple Computer Inc. KeyLargo Mac I/O [106b:0022] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K] Kernel driver in use: macio 0001:10:18.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 27 Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 28 Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 0001:10:1a.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 58 Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=10, secondary=11, subordinate=14, sec-latency=176 Memory window 0: 84000000-87fff000 (prefetchable) Memory window 1: 88000000-8bfff000 I/O window 0: 00001000-000010ff I/O window 1: 00001100-000011ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 1.5 Internal PCI [106b:002f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 16, Cache Line Size: 32 bytes 0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (prog-if 10 [OHCI]) Subsystem: Agere Systems FW323 [11c1:5811] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 16 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 41 Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M] Expansion ROM at f5100000 [disabled] [size=1M] Kernel driver in use: gem Kernel modules: sungem ** USB devices: Bus 002 Device 003: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 5.0.6 APT prefers stable APT policy: (500, 'stable') Architecture: powerpc (ppc) Kernel: Linux 2.6.32-bpo.5-powerpc Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-bpo.5-powerpc depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux 0.92o tools for generating an initramfs ii libc6 2.7-18lenny6 GNU C Library: Shared libraries ii linux-base 2.6.32-15~bpo50+1 Linux image base package ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-bpo.5-powerpc recommends: ii firmware-linux-free 2.6.32-15~bpo50+1 Binary firmware for various driver Versions of packages linux-image-2.6.32-bpo.5-powerpc suggests: pn linux-doc-2.6.32 <none> (no description available) pn mkvmlinuz <none> (no description available) Versions of packages linux-image-2.6.32-bpo.5-powerpc is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.24~bpo50+1 Binary firmware for various driver ii firmware-linux-nonfree 0.24~bpo50+1 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-bpo.5-powerpc/postinst/bootloader-error-2.6.32-bpo.5-powerpc: linux-image-2.6.32-bpo.5-powerpc/postinst/depmod-error-initrd-2.6.32-bpo.5-powerpc: false * linux-image-2.6.32-bpo.5-powerpc/postinst/missing-firmware-2.6.32-bpo.5-powerpc: linux-image-2.6.32-bpo.5-powerpc/prerm/removing-running-kernel-2.6.32-bpo.5-powerpc: true linux-image-2.6.32-bpo.5-powerpc/postinst/bootloader-test-error-2.6.32-bpo.5-powerpc: linux-image-2.6.32-bpo.5-powerpc/prerm/would-invalidate-boot-loader-2.6.32-bpo.5-powerpc: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org