Package: linux-2.6 Version: 2.6.32-30 Severity: grave Justification: renders package unusable
I'm using a Dell powervault MD3200i that has 2 iscsi controllers with 4 ethernet ports each. The multipath-tools package is used to aggregate all links in a single device (configuration is attached). All of this is used on a Xen host with 4 network controllers : eth2 and eth3 are dedicated to the iscsi network, and eth0 and eth1 are bonded and used in the xen bridge. Creating file systems and using them seem to be working perfectly after very basics tests (mkfs.ext3, copy / read files). However, if I want to create a volume group on such a device, everything goes west : [ 1983.757464] ------------[ cut here ]------------ [ 1983.757542] kernel BUG at /build/buildd-linux-2.6_2.6.32-30-amd64-d4MbNM/linux-2.6-2.6.32/debian/build/source_amd64_xen/arch/x86/xen/mmu.c:1649! [ 1983.757651] invalid opcode: 0000 [#1] SMP [ 1983.757808] last sysfs file: /sys/devices/platform/host7/session5/target7:0:0/7:0:0:0/block/sdh/uevent [ 1983.757905] CPU 20 [ 1983.758013] Modules linked in: 8021q garp xen_evtchn xenfs scsi_dh_rdac crc32c ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi bridge stp bonding dm_round_robin dm_multipath scsi_dh loop fuse joydev snd_pcm snd_timer snd soundcore snd_page_alloc pcspkr dcdbas psmouse evdev serio_raw power_meter button processor acpi_processor ext3 jbd mbcache dm_mod sg sr_mod cdrom ata_generic usbhid hid ses sd_mod crc_t10dif enclosure ata_piix libata uhci_hcd megaraid_sas ehci_hcd scsi_mod usbcore nls_base bnx2 thermal thermal_sys [last unloaded: scsi_wait_scan] [ 1983.761366] Pid: 6513, comm: multipath Not tainted 2.6.32-5-xen-amd64 #1 PowerEdge R610 [ 1983.761468] RIP: e030:[<ffffffff8100c694>] [<ffffffff8100c694>] pin_pagetable_pfn+0x2d/0x36 [ 1983.761611] RSP: e02b:ffff8807aa093e08 EFLAGS: 00010282 [ 1983.761685] RAX: 00000000ffffffea RBX: 00000000007aadb2 RCX: 0000000000000001 [ 1983.761761] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8807aa093e08 [ 1983.761839] RBP: ffff8807d7570a80 R08: 0000000000000d90 R09: ffffea001ad5fef0 [ 1983.761921] R10: 0000000000007ff0 R11: 00000001aad59e60 R12: ffff8807aade0d18 [ 1983.762001] R13: ffff8807aaf0aac8 R14: ffff8807d6813880 R15: ffff8807aade0d18 [ 1983.762086] FS: 00007f8c75a987a0(0000) GS:ffff8800282a7000(0000) knlGS:0000000000000000 [ 1983.762189] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1983.762265] CR2: 00007f8c74673290 CR3: 00000007ce9d2000 CR4: 0000000000002660 [ 1983.762346] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1983.762421] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1983.762499] Process multipath (pid: 6513, threadinfo ffff8807aa092000, task ffff8807d6813880) [ 1983.762597] Stack: [ 1983.762663] 0000000000000000 000000000003dd0d ffffea001ad5fef0 00000000007aadb2 [ 1983.762880] <0> ffff8807d7570a80 ffffffff810cd4e2 ffff8807aafb1188 00007f8c74673290 [ 1983.763198] <0> 00000007aafb1000 ffffffff810cb394 ffff8807aaf0aac8 00007f8c74673290 [ 1983.763592] Call Trace: [ 1983.763673] [<ffffffff810cd4e2>] ? __pte_alloc+0x6b/0xc6 [ 1983.763752] [<ffffffff810cb394>] ? pmd_alloc+0x28/0x5b [ 1983.763830] [<ffffffff810cd60b>] ? handle_mm_fault+0xce/0x80f [ 1983.763907] [<ffffffff810d0ecb>] ? get_unmapped_area+0xd7/0x139 [ 1983.763981] [<ffffffff8130f016>] ? do_page_fault+0x2e0/0x2fc [ 1983.764059] [<ffffffff8130ceb5>] ? page_fault+0x25/0x30 [ 1983.764127] Code: ec 28 89 3c 24 48 89 f7 e8 a2 fd ff ff 48 89 e7 48 89 44 24 08 be 01 00 00 00 31 d2 41 ba f0 7f 00 00 e8 b0 cc ff ff 85 c0 74 04 <0f> 0b eb fe 48 83 c4 28 c3 55 49 89 ca 48 89 d5 40 88 f1 48 89 [ 1983.766957] RIP [<ffffffff8100c694>] pin_pagetable_pfn+0x2d/0x36 [ 1983.767093] RSP <ffff8807aa093e08> [ 1983.767168] ---[ end trace 66acf7edaf7ddad0 ]--- ** /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback iface eth0 inet manual iface eth1 inet manual auto bond0 iface bond0 inet manual slaves eth0 eth1 bond-mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 auto xenbr iface xenbr inet static bridge_ports bond0 address 10.2.1.217 netmask 255.255.255.0 gateway 10.2.1.4 # interface veth2 auto eth2 iface eth2 inet static address 192.168.130.5 netmask 255.255.255.0 pre-up ifconfig eth2 mtu 9000 up auto eth2:1 iface eth2:1 inet static address 192.168.131.5 netmask 255.255.255.0 pre-up ifconfig eth2 mtu 9000 up # interface veth3 auto eth3 iface eth3 inet static address 192.168.132.5 netmask 255.255.255.0 pre-up ifconfig eth3 mtu 9000 up auto eth3:1 iface eth3:1 inet static address 192.168.133.5 netmask 255.255.255.0 pre-up ifconfig eth3 mtu 9000 up ** /etc/multipath.conf blacklist { device { vendor "*" product "Universal Xport" } } defaults { user_friendly_names yes max_fds 8192 } devices { device { vendor "DELL" product "MD32xxi" path_grouping_policy group_by_prio prio rdac polling_interval 5 path_checker rdac path_selector "round-robin 0" hardware_handler "1 rdac" failback immediate features "2 pg_init_retries 50" no_path_retry 30 rr_min_io 100 prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } multipaths { multipath { wwid 36782bcb00006affd000003504d523f99 alias "logs" } ... ... } ** multipath -ll output # multipath -ll logs (36782bcb00006affd000003504d523f99) dm-9 DELL,MD32xxi size=2.0T features='3 queue_if_no_path pg_init_retries 50' hwhandler='1 rdac' wp=rw |-+- policy='round-robin 0' prio=24 status=active | |- 10:0:0:3 sdah 66:16 active ready running | |- 6:0:0:3 sdv 65:80 active ready running | |- 8:0:0:3 sdac 65:192 active ready running | `- 9:0:0:3 sdag 66:0 active ready running `-+- policy='round-robin 0' prio=4 status=enabled |- 4:0:0:3 sds 65:32 active ghost running |- 5:0:0:3 sdae 65:224 active ghost running |- 7:0:0:3 sdaf 65:240 active ghost running `- 3:0:0:3 sdai 66:32 active ghost running ... ... ... -- Package-specific info: ** Version: Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-30) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 05:46:49 UTC 2011 ** Command line: placeholder root=UUID=6adfecbc-cf4e-4f5d-bfcf-5ea348965721 ro allowhugepage quiet ** Not tainted ** Kernel log: [ 41.638992] sd 9:0:0:2: [sdy] Sense Key : Illegal Request [current] [ 41.638997] sd 9:0:0:2: [sdy] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 [ 41.639005] sd 9:0:0:2: [sdy] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 41.639019] end_request: I/O error, dev sdy, sector 0 [ 41.639530] sd 10:0:0:2: [sdz] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 41.639538] sd 10:0:0:2: [sdz] Sense Key : Illegal Request [current] [ 41.639546] sd 10:0:0:2: [sdz] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 [ 41.639555] sd 10:0:0:2: [sdz] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 41.639570] end_request: I/O error, dev sdz, sector 0 [ 41.700646] sd 8:0:0:4: [sdaj] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 41.700651] sd 8:0:0:4: [sdaj] Sense Key : Illegal Request [current] [ 41.700656] sd 8:0:0:4: [sdaj] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 [ 41.700665] sd 8:0:0:4: [sdaj] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 41.700676] end_request: I/O error, dev sdaj, sector 0 [ 41.703214] sd 10:0:0:4: [sdan] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 41.703218] sd 10:0:0:4: [sdan] Sense Key : Illegal Request [current] [ 41.703221] sd 10:0:0:4: [sdan] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 [ 41.703226] sd 10:0:0:4: [sdan] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 41.703234] end_request: I/O error, dev sdan, sector 0 [ 41.703876] sd 9:0:0:4: [sdam] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 41.703881] sd 9:0:0:4: [sdam] Sense Key : Illegal Request [current] [ 41.703885] sd 9:0:0:4: [sdam] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 [ 41.703890] sd 9:0:0:4: [sdam] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 41.703899] end_request: I/O error, dev sdam, sector 0 [ 42.505735] Event-channel device installed. [ 42.950272] alloc irq_desc for 4442 on node -1 [ 42.950275] alloc kstat_irqs on node -1 [ 42.950323] alloc irq_desc for 4441 on node -1 [ 42.950324] alloc kstat_irqs on node -1 [ 42.950519] XENBUS: Unable to read cpu state [ 42.951736] XENBUS: Unable to read cpu state [ 42.951991] XENBUS: Unable to read cpu state [ 42.952118] XENBUS: Unable to read cpu state [ 42.952292] XENBUS: Unable to read cpu state [ 42.952480] XENBUS: Unable to read cpu state [ 42.952816] XENBUS: Unable to read cpu state [ 42.952947] XENBUS: Unable to read cpu state [ 42.953096] XENBUS: Unable to read cpu state [ 42.953223] XENBUS: Unable to read cpu state [ 42.953402] XENBUS: Unable to read cpu state [ 42.953536] XENBUS: Unable to read cpu state [ 42.953715] XENBUS: Unable to read cpu state [ 42.953906] XENBUS: Unable to read cpu state [ 42.954044] XENBUS: Unable to read cpu state [ 42.954205] XENBUS: Unable to read cpu state [ 42.955250] XENBUS: Unable to read cpu state [ 42.955378] XENBUS: Unable to read cpu state [ 42.955597] XENBUS: Unable to read cpu state [ 42.955783] XENBUS: Unable to read cpu state [ 42.955953] XENBUS: Unable to read cpu state [ 42.956315] XENBUS: Unable to read cpu state [ 42.956451] XENBUS: Unable to read cpu state [ 42.956575] XENBUS: Unable to read cpu state [ 43.026584] device-mapper: table: 254:10: multipath: error getting device [ 43.026646] device-mapper: ioctl: error adding target to table [ 43.069359] device-mapper: table: 254:10: multipath: error getting device [ 43.069421] device-mapper: ioctl: error adding target to table [ 43.906150] 802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com> [ 43.906152] All bugs added by David S. Miller <da...@redhat.com> [ 43.912634] device xenbr entered promiscuous mode [ 43.923133] device xenbr.7 entered promiscuous mode [ 43.923154] vlanbr7: port 1(xenbr.7) entering forwarding state [ 43.966976] device xenbr.8 entered promiscuous mode [ 43.966999] vlanbr8: port 1(xenbr.8) entering forwarding state [ 44.011613] device xenbr.9 entered promiscuous mode [ 44.011634] vlanbr9: port 1(xenbr.9) entering forwarding state [ 44.056956] device xenbr.10 entered promiscuous mode [ 44.056976] vlanbr10: port 1(xenbr.10) entering forwarding state [ 44.103700] device xenbr.11 entered promiscuous mode [ 44.103721] vlanbr11: port 1(xenbr.11) entering forwarding state [ 44.153831] device xenbr.12 entered promiscuous mode [ 44.153851] vlanbr12: port 1(xenbr.12) entering forwarding state [ 44.204168] device xenbr.13 entered promiscuous mode [ 44.204188] vlanbr13: port 1(xenbr.13) entering forwarding state [ 44.254162] device xenbr.14 entered promiscuous mode [ 44.254180] vlanbr14: port 1(xenbr.14) entering forwarding state [ 44.305862] device xenbr.15 entered promiscuous mode [ 44.305885] vlanbr15: port 1(xenbr.15) entering forwarding state [ 44.356849] device xenbr.16 entered promiscuous mode [ 44.356870] vlanbr16: port 1(xenbr.16) entering forwarding state [ 54.079097] xenbr.7: no IPv6 routers present [ 54.135063] xenbr.8: no IPv6 routers present [ 54.207065] xenbr.12: no IPv6 routers present [ 54.227050] xenbr.13: no IPv6 routers present [ 54.227065] vlanbr13: no IPv6 routers present [ 54.227071] vlanbr11: no IPv6 routers present [ 54.239061] xenbr.11: no IPv6 routers present [ 54.287042] vlanbr12: no IPv6 routers present [ 54.335041] vlanbr7: no IPv6 routers present [ 54.363041] vlanbr8: no IPv6 routers present [ 54.463041] vlanbr16: no IPv6 routers present [ 54.651039] vlanbr15: no IPv6 routers present [ 54.651051] vlanbr10: no IPv6 routers present [ 54.723070] xenbr.9: no IPv6 routers present [ 54.747025] vlanbr14: no IPv6 routers present [ 54.759771] xenbr.10: no IPv6 routers present [ 54.839024] xenbr.15: no IPv6 routers present [ 54.919024] vlanbr9: no IPv6 routers present [ 55.063027] xenbr.14: no IPv6 routers present [ 55.291030] xenbr.16: no IPv6 routers present ** Model information sys_vendor: Dell Inc. product_name: PowerEdge R610 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: 2.2.10 board_vendor: Dell Inc. board_name: 0F0XJ6 board_version: A08 ** Loaded modules: Module Size Used by 8021q 17222 0 garp 5050 1 8021q xen_evtchn 4339 1 xenfs 9600 1 scsi_dh_rdac 5997 40 crc32c 2560 32 ib_iser 24674 0 rdma_cm 20582 1 ib_iser ib_cm 26240 1 rdma_cm iw_cm 6371 1 rdma_cm ib_sa 16103 2 rdma_cm,ib_cm ib_mad 30001 2 ib_cm,ib_sa ib_core 40967 6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad ib_addr 4389 1 rdma_cm iscsi_tcp 8097 88 libiscsi_tcp 10994 1 iscsi_tcp libiscsi 29302 3 ib_iser,iscsi_tcp,libiscsi_tcp scsi_transport_iscsi 25036 4 ib_iser,iscsi_tcp,libiscsi bridge 39662 0 stp 1440 2 garp,bridge bonding 74103 0 dm_round_robin 2228 10 dm_multipath 13192 6 dm_round_robin scsi_dh 4624 2 scsi_dh_rdac,dm_multipath loop 11799 0 fuse 50625 1 joydev 8459 0 snd_pcm 60551 0 snd_timer 15582 1 snd_pcm snd 46446 2 snd_pcm,snd_timer soundcore 4598 1 snd snd_page_alloc 6249 1 snd_pcm pcspkr 1699 0 dcdbas 5048 0 psmouse 49777 0 evdev 7352 3 serio_raw 3752 0 power_meter 8302 0 button 4650 0 processor 35941 0 acpi_processor 5087 1 processor,[permanent] ext3 106502 1 jbd 37085 1 ext3 mbcache 5050 1 ext3 dm_mod 53754 18 dm_multipath sg 18760 0 sr_mod 12602 0 cdrom 29415 1 sr_mod ata_generic 3047 0 usbhid 33276 0 hid 63225 1 usbhid ses 5128 0 sd_mod 29873 43 crc_t10dif 1276 1 sd_mod enclosure 5503 1 ses ata_piix 21124 0 libata 133632 2 ata_generic,ata_piix uhci_hcd 18521 0 megaraid_sas 30611 2 ehci_hcd 31151 0 scsi_mod 122133 12 scsi_dh_rdac,ib_iser,iscsi_tcp,libiscsi,scsi_transport_iscsi,scsi_dh,sg,sr_mod,ses,sd_mod,libata,megaraid_sas usbcore 122034 4 usbhid,uhci_hcd,ehci_hcd nls_base 6377 1 usbcore bnx2 57417 0 thermal 11674 0 thermal_sys 11942 2 processor,thermal ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port [8086:3403] (rev 13) Subsystem: Dell PowerEdge R610 I/O Hub to ESI Port [1028:0236] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 15 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: d6000000-d9ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: da000000-ddffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell PowerEdge R610 USB UHCI Controller [1028:0236] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 4: I/O ports at ec40 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell PowerEdge R610 USB UHCI Controller [1028:0236] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at ec60 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell PowerEdge R610 USB EHCI Controller [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 19 Region 0: Memory at df0fe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-0000ffff Memory behind bridge: df100000-df1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell PowerEdge R610 USB UHCI Controller [1028:0236] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at ec80 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell PowerEdge R610 USB UHCI Controller [1028:0236] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 4: I/O ports at eca0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell PowerEdge R610 USB EHCI Controller [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at df0ff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 Memory behind bridge: de000000-deffffff Prefetchable memory behind bridge: 00000000d5800000-00000000d5ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: Dell PowerEdge R610 82801IB (ICH9) LPC Interface Controller [1028:0236] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell PowerEdge R610 SATA IDE Controller [1028:0236] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 23 Region 0: I/O ports at ec10 [size=8] Region 1: I/O ports at ec08 [size=4] Region 2: I/O ports at ec18 [size=8] Region 3: I/O ports at ec0c [size=4] Region 4: I/O ports at ec20 [size=16] Region 5: I/O ports at ec30 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell PowerEdge R610 BCM5709 Gigabit Ethernet [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 36 Region 0: Memory at d6000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell PowerEdge R610 BCM5709 Gigabit Ethernet [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 48 Region 0: Memory at d8000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell PowerEdge R610 BCM5709 Gigabit Ethernet [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 32 Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 02:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20) Subsystem: Dell PowerEdge R610 BCM5709 Gigabit Ethernet [1028:0236] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 42 Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M] Capabilities: <access denied> Kernel driver in use: bnx2 03:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic LSI MegaSAS 9260 [1000:0079] (rev 05) Subsystem: Dell PERC H700 Integrated [1028:1f17] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at fc00 [size=256] Region 1: Memory at df1bc000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at df1c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at df100000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: megaraid_sas 06:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller]) Subsystem: Dell PowerEdge R610 MGA G200eW WPCM450 [1028:0236] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at d5800000 (32-bit, prefetchable) [size=8M] Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at de000000 [disabled] [size=64K] Capabilities: <access denied> ** USB devices: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0624:0248 Avocent Corp. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0 Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/24 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-5-xen-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-30 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-xen-amd64 recommends: ii firmware-linux-free 2.6.32-30 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-xen-amd64 suggests: pn grub <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-xen-amd64 is related to: ii firmware-bnx2 0.28 Binary firmware for Broadcom NetXt pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) ii xen-hypervisor-4.0-amd64 [xen 4.0.1-2 The Xen Hypervisor on AMD64 -- debconf information: linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: false linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64: linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: true linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org