Package: linux-2.6 Version: 2.6.32-30 Severity: normal
Kernel does not properly set the tuner type, falling back to another one. This breaks tuning functionality in TV programs like Kaffeine. Here's an extract from the kernel log: Feb 20 18:31:11 deneb kernel: [ 8.807044] cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected], frontend(s): 1 Feb 20 18:31:11 deneb kernel: [ 8.807046] cx88[0]: TV tuner type 63, Radio tuner type -1 Feb 20 18:31:11 deneb kernel: [ 8.926574] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner Feb 20 18:31:11 deneb kernel: [ 8.997772] tuner 1-0043: chip found @ 0x86 (cx88[0]) Feb 20 18:31:11 deneb kernel: [ 9.048390] tuner 1-0061: chip found @ 0xc2 (cx88[0]) Feb 20 18:31:11 deneb kernel: [ 9.086591] tveeprom 1-0050: tuner model is Philips FMD1216MEX (idx 133, type 78) Feb 20 18:31:11 deneb kernel: [ 9.086601] cx88[0]: hauppauge eeprom: model=96019 Feb 20 18:31:11 deneb kernel: [ 9.117041] tuner-simple 1-0061: creating new instance Feb 20 18:31:11 deneb kernel: [ 9.117044] tuner-simple 1-0061: type set to 78 (Philips FMD1216MEX MK3 Hybrid Tuner) Feb 20 18:31:11 deneb kernel: [ 9.299118] tuner-simple 1-0061: attaching existing instance Feb 20 18:31:11 deneb kernel: [ 9.299121] tuner-simple 1-0061: couldn't set type to 63. Using 78 (Philips FMD1216MEX MK3 Hybrid Tuner) instead In contrast, booting with Lenny (kernel 2.6.26), tuner type is set correctly and tuning works OK: Feb 17 16:51:17 deneb kernel: [ 0.000000] Linux version 2.6.26-2-686-bigmem (Debian 2.6.26-26lenny2) ([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2 Feb 17 16:51:17 deneb kernel: [ 18.613837] cx88[0]: subsystem: 0070:9601, board: Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder [card=56,autodetected] Feb 17 16:51:17 deneb kernel: [ 18.613837] cx88[0]: TV tuner type 63, Radio tuner type -1 Feb 17 16:51:17 deneb kernel: [ 18.757981] tuner' 1-0061: chip found @ 0xc2 (cx88[0]) Feb 17 16:51:17 deneb kernel: [ 18.757981] tuner' 1-0063: chip found @ 0xc6 (cx88[0]) Feb 17 16:51:17 deneb kernel: [ 18.858716] tuner-simple 1-0061: creating new instance Feb 17 16:51:17 deneb kernel: [ 18.858716] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) Feb 17 16:51:17 deneb kernel: [ 18.930322] tuner-simple 1-0061: attaching existing instance Feb 17 16:51:17 deneb kernel: [ 18.930363] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) -- Package-specific info: ** Version: Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-30) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:40:25 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686-bigmem root=UUID=3941ff55-d4b9-457c-b30b-f046ec641d73 ro quiet ** Tainted: P (1) * Proprietary module has been loaded. ** Kernel log: [ 27.032005] eth0: no IPv6 routers present [ 30.170966] Bluetooth: Core ver 2.15 [ 30.171127] NET: Registered protocol family 31 [ 30.171129] Bluetooth: HCI device and connection manager initialized [ 30.171131] Bluetooth: HCI socket layer initialized [ 30.189644] Bluetooth: L2CAP ver 2.14 [ 30.189647] Bluetooth: L2CAP socket layer initialized [ 30.323281] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.323283] Bluetooth: BNEP filters: protocol multicast [ 30.374323] Bridge firewalling registered [ 30.411137] Bluetooth: SCO (Voice Link) ver 0.6 [ 30.411140] Bluetooth: SCO socket layer initialized [ 31.740584] lp0: using parport0 (interrupt-driven). [ 31.811958] ppdev: user-space parallel port driver [ 32.644504] vmnet1: no IPv6 routers present [ 33.508504] vmnet8: no IPv6 routers present [ 91.270702] CPU0 attaching NULL sched-domain. [ 91.270706] CPU1 attaching NULL sched-domain. [ 91.296539] CPU0 attaching sched-domain: [ 91.296543] domain 0: span 0-1 level MC [ 91.296545] groups: 0 1 [ 91.296550] CPU1 attaching sched-domain: [ 91.296552] domain 0: span 0-1 level MC [ 91.296554] groups: 1 0 [ 320.232009] usb 9-4: new high speed USB device using ehci_hcd and address 3 [ 320.366145] usb 9-4: New USB device found, idVendor=152d, idProduct=2338 [ 320.366148] usb 9-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 320.366151] usb 9-4: Product: USB to ATA/ATAPI Bridge [ 320.366153] usb 9-4: Manufacturer: JMicron [ 320.366155] usb 9-4: SerialNumber: 3BA27540261A [ 320.366248] usb 9-4: configuration #1 chosen from 1 choice [ 320.410217] Initializing USB Mass Storage driver... [ 320.410346] scsi10 : SCSI emulation for USB Mass Storage devices [ 320.410461] usb-storage: device found at 3 [ 320.410463] usb-storage: waiting for device to settle before scanning [ 320.410474] usbcore: registered new interface driver usb-storage [ 320.410477] USB Mass Storage support registered. [ 325.409252] usb-storage: device scan complete [ 325.409873] scsi 10:0:0:0: Direct-Access TOSHIBA MK4026GAXB PQ: 0 ANSI: 2 CCS [ 325.410537] sd 10:0:0:0: Attached scsi generic sg3 type 0 [ 325.414576] sd 10:0:0:0: [sdb] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 325.415353] sd 10:0:0:0: [sdb] Write Protect is off [ 325.415356] sd 10:0:0:0: [sdb] Mode Sense: 00 38 00 00 [ 325.415358] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 325.417231] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 325.417235] sdb: sdb1 [ 325.422980] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 325.422984] sd 10:0:0:0: [sdb] Attached SCSI disk [ 325.733492] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 347.375542] kjournald starting. Commit interval 5 seconds [ 347.375628] EXT3 FS on dm-0, internal journal [ 347.375632] EXT3-fs: mounted filesystem with ordered data mode. [ 1763.696038] hub 8-0:1.0: port 2 disabled by hub (EMI?), re-enabling... [ 1763.696043] usb 8-2: USB disconnect, address 2 [ 1763.696198] usblp1: removed [ 1763.936010] usb 8-2: new full speed USB device using uhci_hcd and address 3 [ 1764.142097] usb 8-2: New USB device found, idVendor=03f0, idProduct=3a02 [ 1764.142100] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1764.142102] usb 8-2: Product: photosmart 7150 [ 1764.142104] usb 8-2: Manufacturer: hp [ 1764.142106] usb 8-2: SerialNumber: MY2A9441QW2F [ 1764.142199] usb 8-2: configuration #1 chosen from 1 choice [ 1764.153140] usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3A02 [ 1765.228018] usb 9-4: USB disconnect, address 3 [ 1931.674906] cx88[0]/2-bb: VIDIOC_G_FMT: w: 720, h: 480, f: 4 [ 1931.675007] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675011] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675014] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675017] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675020] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675023] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675026] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675029] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675032] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675035] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 1931.675041] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988544] cx88[0]/2-bb: VIDIOC_G_FMT: w: 720, h: 480, f: 4 [ 2506.988637] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988641] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988644] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988647] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988650] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988653] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988656] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988659] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988662] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988665] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2506.988671] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270339] cx88[0]/2-bb: VIDIOC_G_FMT: w: 720, h: 480, f: 4 [ 2510.270436] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270439] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270443] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270446] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270449] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270452] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270455] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270458] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270461] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270464] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 [ 2510.270471] cx88[0]/2-bb: VIDIOC_TRY_FMT: w: 720, h: 480, f: 4 ** Model information not available ** Loaded modules: Module Size Used by nls_utf8 908 0 nls_cp437 4489 0 vfat 6570 0 fat 34912 1 vfat usb_storage 30617 0 binfmt_misc 4907 1 ppdev 4058 0 lp 5570 0 sco 5857 2 bridge 33019 0 stp 996 1 bridge bnep 7444 2 l2cap 21705 3 bnep crc16 1027 1 l2cap bluetooth 36319 5 sco,bnep,l2cap rfkill 10264 3 bluetooth vmnet 31885 13 vmblock 8518 1 vsock 29259 0 vmci 41779 1 vsock vmmon 53796 0 cpufreq_stats 1940 0 cpufreq_conservative 4018 0 cpufreq_userspace 1480 0 cpufreq_powersave 602 0 deflate 1315 0 zlib_deflate 15822 1 deflate ctr 2703 0 twofish 5665 0 twofish_common 12560 1 twofish camellia 16843 0 serpent 16187 0 blowfish 7252 0 cast5 15593 0 des_generic 15027 0 cbc 2047 0 aes_i586 6816 0 aes_generic 25738 1 aes_i586 xcbc 1925 0 rmd160 9448 0 sha256_generic 10748 0 sha1_generic 1395 0 hmac 2033 0 crypto_null 1876 0 af_key 23390 0 fuse 44033 1 dm_crypt 9264 0 it87 11499 0 hwmon_vid 1528 1 it87 eeprom 2609 0 acpi_cpufreq 4951 0 loop 9765 0 cx88_blackbird 10944 0 cx2341x 8257 1 cx88_blackbird cx22702 3717 1 cx88_dvb 14300 0 cx88_vp3054_i2c 1264 1 cx88_dvb videobuf_dvb 3390 1 cx88_dvb dvb_core 62650 2 cx88_dvb,videobuf_dvb wm8775 2259 1 tuner_simple 9694 2 tuner_types 7537 1 tuner_simple tda9887 6997 1 snd_hda_codec_realtek 163294 1 tda8290 7865 0 tuner 14428 2 snd_hda_intel 16895 1 snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel cx88_alsa 6107 0 snd_hwdep 4054 1 snd_hda_codec snd_pcm_oss 28671 0 snd_seq_midi 3576 0 snd_mixer_oss 10461 1 snd_pcm_oss snd_rawmidi 12513 1 snd_seq_midi snd_pcm 47386 4 snd_hda_intel,snd_hda_codec,cx88_alsa,snd_pcm_oss cx8802 9409 2 cx88_blackbird,cx88_dvb cx8800 20227 1 cx88_blackbird snd_seq_midi_event 3684 1 snd_seq_midi cx88xx 59172 5 cx88_blackbird,cx88_dvb,cx88_alsa,cx8802,cx8800 snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event ir_common 22187 1 cx88xx v4l2_common 9820 6 cx88_blackbird,cx2341x,wm8775,tuner,cx8800,cx88xx i2c_algo_bit 3497 2 cx88_vp3054_i2c,cx88xx videodev 25545 6 cx88_blackbird,wm8775,tuner,cx8800,cx88xx,v4l2_common tveeprom 9393 1 cx88xx v4l1_compat 10250 1 videodev videobuf_dma_sg 7263 6 cx88_blackbird,cx88_dvb,cx88_alsa,cx8802,cx8800,cx88xx snd_timer 12258 2 snd_pcm,snd_seq btcx_risc 2527 4 cx88_alsa,cx8802,cx8800,cx88xx videobuf_core 10476 6 cx88_blackbird,videobuf_dvb,cx8802,cx8800,cx88xx,videobuf_dma_sg i2c_i801 6466 0 snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq nvidia 9843640 28 joydev 6739 0 shpchp 21264 0 i2c_core 12696 16 eeprom,cx22702,cx88_vp3054_i2c,wm8775,tuner_simple,tda9887,tda8290,tuner,cx8800,cx88xx,v4l2_common,i2c_algo_bit,videodev,tveeprom,i2c_i801,nvidia pci_hotplug 18065 1 shpchp snd 34375 14 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,cx88_alsa,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 3450 1 snd snd_page_alloc 5113 2 snd_hda_intel,snd_pcm usblp 7899 0 processor 26335 1 acpi_cpufreq button 3598 0 parport_pc 15907 1 parport 22554 3 ppdev,lp,parport_pc evdev 5609 15 pcspkr 1207 0 ext3 94204 1 jbd 32169 1 ext3 mbcache 3762 1 ext3 dm_mod 46082 1 dm_crypt raid10 16733 0 usbhid 28056 0 hid 50893 1 usbhid raid456 42876 0 async_raid6_recov 4166 1 raid456 async_pq 2647 2 raid456,async_raid6_recov raid6_pq 77468 2 async_raid6_recov,async_pq async_xor 1990 3 raid456,async_raid6_recov,async_pq xor 12418 1 async_xor async_memcpy 858 2 raid456,async_raid6_recov async_tx 1326 5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy raid1 16375 0 raid0 5601 0 multipath 4987 0 linear 3063 0 md_mod 67345 6 raid10,raid456,raid1,raid0,multipath,linear sg 15968 0 sr_mod 10770 0 cdrom 26487 1 sr_mod sd_mod 25969 3 crc_t10dif 1012 1 sd_mod ata_generic 2067 0 ohci_hcd 17072 0 pata_jmicron 1452 0 uhci_hcd 16141 0 firewire_ohci 17009 0 firewire_core 31287 1 firewire_ohci crc_itu_t 1035 1 firewire_core ehci_hcd 28263 0 floppy 40931 0 r8169 25376 0 mii 2714 1 r8169 ahci 27286 3 libata 116061 3 ata_generic,pata_jmicron,ahci scsi_mod 101433 5 usb_storage,sg,sr_mod,sd_mod,libata thermal 9206 0 thermal_sys 9378 2 processor,thermal usbcore 98801 7 usb_storage,usblp,usbhid,ohci_hcd,uhci_hcd,ehci_hcd nls_base 4541 5 nls_utf8,nls_cp437,vfat,fat,usbcore ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: e4000000-e7ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e100 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at e200 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at ee105000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: Giga-byte Technology Device [1458:a002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at ee100000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: ee200000-ee3fffff Prefetchable memory behind bridge: 00000000ee400000-00000000ee5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: ee000000-ee0fffff Prefetchable memory behind bridge: 00000000ee600000-00000000ee7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: e8000000-e9ffffff Prefetchable memory behind bridge: 00000000ee800000-00000000ee9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at e300 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at e400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at e500 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at ee104000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=06, sec-latency=32 Memory behind bridge: ea000000-edffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 82801IB (ICH9) 4 port SATA AHCI Controller [8086:2923] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Device [1458:b005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 28 Region 0: I/O ports at e600 [size=8] Region 1: I/O ports at e700 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e900 [size=4] Region 4: I/O ports at ea00 [size=32] Region 5: Memory at ee106000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at ee107000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [GeForce 8600 GT] [10de:0402] (rev a1) (prog-if 00 [VGA controller]) Subsystem: XFX Pine Group Inc. Device [1682:4016] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at e4000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at b000 [size=128] [virtual] Expansion ROM at e7000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia 03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 5: Memory at ee000000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 16 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at c100 [size=4] Region 2: I/O ports at c200 [size=8] Region 3: I/O ports at c300 [size=4] Region 4: I/O ports at c400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 29 Region 0: I/O ports at d000 [size=256] Region 2: Memory at e9000000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at ee800000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 05:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:9601] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx8800 05:00.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:9601] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx88_audio 05:00.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05) Subsystem: Hauppauge computer works Inc. Device [0070:9601] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx88-mpeg driver manager 05:01.0 PCI bridge [0604]: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) [3388:0021] (rev 15) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Bus: primary=05, secondary=06, subordinate=06, sec-latency=32 Memory behind bridge: ed000000-ed0fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 06:08.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10 [OHCI]) Subsystem: Adaptec Device [9004:1135] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ed007000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 06:08.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 41) (prog-if 10 [OHCI]) Subsystem: Adaptec Device [9004:1135] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at ed004000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 06:08.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 02) (prog-if 20 [EHCI]) Subsystem: Adaptec Device [9004:11e0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 16 Region 0: Memory at ed005000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 06:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI]) Subsystem: Texas Instruments Device [104c:8010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at ed006000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at ed000000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 011 Device 004: ID 046d:c70a Logitech, Inc. MX5000 Cordless Desktop Bus 011 Device 003: ID 046d:c70e Logitech, Inc. MX1000 Bluetooth Laser Mouse Bus 011 Device 002: ID 046d:0b02 Logitech, Inc. BT Mini-Receiver (HID proxy mode) Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 003: ID 03f0:3a02 Hewlett-Packard PhotoSmart 7150 Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 04a9:220e Canon, Inc. CanoScan N1240U/LiDE 30 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686-bigmem (SMP w/2 CPU cores) Locale: LANG=es_ES@euro, LC_CTYPE=es_ES@euro (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686-bigmem depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-30 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686-bigmem recommends: ii firmware-linux-free 2.6.32-30 Binary firmware for various driver ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-686-bigmem suggests: ii grub 0.97-64 GRand Unified Bootloader (dummy pa pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686-bigmem is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
