Package: bugs.debian.org Severity: normal Tags: squeeze, LSBInitScripts, md raid
md raid starts before the scsi second channel devices are ready lspci .... 02:06.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) 02:06.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) .... dmesg [ 33.341942] md: md0 stopped. [ 33.342652] md: bind<sdb1> [ 33.365662] md: raid1 personality registered for level 1 [ 33.365924] raid1: raid set md0 active with 1 out of 2 mirrors [ 33.365961] md0: detected capacity change from 0 to 73401243648 [ 33.367390] md0: p1 [ 33.568983] md: md1 stopped. [ 33.569532] md: bind<sdc1> [ 33.570920] raid1: raid set md1 active with 1 out of 2 mirrors [ 33.570947] md1: detected capacity change from 0 to 73401243648 [ 33.572239] md1: p1 [ 33.773988] md: md2 stopped. [ 33.774541] md: bind<sdd1> [ 33.775924] raid1: raid set md2 active with 1 out of 2 mirrors [ 33.775954] md2: detected capacity change from 0 to 73401243648 [ 33.777282] md2: p1 [ 34.450578] sd 7:0:0:0: [sde] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 34.450621] sd 7:0:2:0: [sdg] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 34.450671] sd 7:0:1:0: [sdf] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 34.450731] sd 7:0:3:0: [sdh] 143374744 512-byte logical blocks: (73.4 GB/68.3 GiB) [ 34.452059] sd 7:0:0:0: [sde] Write Protect is off [ 34.452062] sd 7:0:0:0: [sde] Mode Sense: ab 00 10 08 [ 34.452107] sd 7:0:2:0: [sdg] Write Protect is off [ 34.452110] sd 7:0:2:0: [sdg] Mode Sense: ab 00 10 08 [ 34.452165] sd 7:0:1:0: [sdf] Write Protect is off [ 34.452168] sd 7:0:1:0: [sdf] Mode Sense: ab 00 10 08 [ 34.452225] sd 7:0:3:0: [sdh] Write Protect is off [ 34.452228] sd 7:0:3:0: [sdh] Mode Sense: ab 00 10 08 [ 34.453952] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 34.454018] sd 7:0:2:0: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 34.454068] sd 7:0:1:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 34.454151] sd 7:0:3:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 34.457852] sde: [ 34.458049] sdf: [ 34.458097] sdg: [ 34.458156] sdh: sdh1 [ 34.463284] sde1 [ 34.463779] sdf1 [ 34.465979] sdg1 [ 34.466513] sd 7:0:3:0: [sdh] Attached SCSI disk [ 34.468435] sd 7:0:0:0: [sde] Attached SCSI disk [ 34.468899] sd 7:0:1:0: [sdf] Attached SCSI disk [ 34.471235] sd 7:0:2:0: [sdg] Attached SCSI disk -- System Information: Debian Release: 6.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
