output from bootinfoscript attached. I removed nfs- and local bind entries from fstab. Rest of the output is unchanged.
See device changes from different boot times (no hw-change) > In GRUB shell could you try executing > terminal_output gfxterm > ? results in: no suitable mode found regards Gero
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #2 for (,msdos2)/grub. => No boot loader is installed in the MBR of /dev/sdb => No boot loader is installed in the MBR of /dev/sdc => Testdisk is installed in the MBR of /dev/sdd => No boot loader is installed in the MBR of /dev/sde => No boot loader is installed in the MBR of /dev/sdf => Windows is installed in the MBR of /dev/sdg => Grub 2 is installed in the MBR of /dev/sdh and looks on the same drive in partition #3 for (,msdos3)/boot/grub. sda1: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Debian GNU/Linux 6.0 Boot files/dirs: /etc/fstab sda2: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: /grub/grub.cfg /grub/core.img sda3: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb1: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb2: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sdc1: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdc2: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sdd1: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdd2: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sde1: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sdf1: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sdg1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdh1: _________________________________________________________________________ File system: xfs Boot sector type: - Boot sector info: Operating System: Boot files/dirs: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 63 41,961,779 41,961,717 83 Linux /dev/sda2 * 41,963,520 42,743,807 780,288 83 Linux /dev/sda3 42,743,808 78,163,967 35,420,160 83 Linux Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 150.0 GB, 150039945216 bytes 255 heads, 63 sectors/track, 18241 cylinders, total 293046768 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 2,048 39,063,551 39,061,504 82 Linux swap / Solaris /dev/sdb2 39,063,552 293,046,271 253,982,720 83 Linux Drive: sdc ___________________ _____________________________________________________ Disk /dev/sdc: 55.0 GB, 55021510656 bytes 255 heads, 63 sectors/track, 6689 cylinders, total 107463888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdc1 63 8,401,994 8,401,932 82 Linux swap / Solaris /dev/sdc2 8,401,995 107,458,784 99,056,790 83 Linux Drive: sdd ___________________ _____________________________________________________ Disk /dev/sdd: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdd1 * 63 7,807,589 7,807,527 82 Linux swap / Solaris /dev/sdd2 7,807,590 70,734,194 62,926,605 83 Linux Drive: sde ___________________ _____________________________________________________ Disk /dev/sde: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sde1 63 1,465,144,064 1,465,144,002 83 Linux Drive: sdf ___________________ _____________________________________________________ Disk /dev/sdf: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdf1 64 976,773,167 976,773,104 83 Linux Drive: sdg ___________________ _____________________________________________________ Disk /dev/sdg: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdg1 * 2,048 3,907,026,943 3,907,024,896 7 HPFS/NTFS Drive: sdh ___________________ _____________________________________________________ Disk /dev/sdh: 500.1 GB, 500107862016 bytes 81 heads, 63 sectors/track, 191411 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdh1 2,048 976,773,167 976,771,120 83 Linux blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 7ce6540f-5ffe-445d-9bbf-d41652854700 ext4 StdRoot /dev/sda2 59c82698-6fcc-4512-a51c-261348d637da ext3 boot /dev/sda3 b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ext4 /dev/sda: PTTYPE="dos" /dev/sdb1 e00d97ff-81a9-4741-8c3d-57c4169cd1f5 swap /dev/sdb2 85b61063-621b-44eb-8f99-e9834b9b8531 ext3 /dev/sdb: PTTYPE="dos" /dev/sdc1 129580e7-04cf-4700-82df-8ef9f6bd8fe7 swap /dev/sdc2 44403194-a873-48ac-978c-b08a13c5d756 ext4 Squeeze_User /dev/sdc: PTTYPE="dos" /dev/sdd1 750773ee-f955-4f36-9c5c-1036adaeafb6 swap /dev/sdd2 55141d3b-4331-4f4a-b127-8ea77121a483 ext4 Squeeze_Var /dev/sdd: PTTYPE="dos" /dev/sde1 42b730c9-2a57-47a6-b0df-f6758b7f5fa5 ext3 /dev/sde: PTTYPE="dos" /dev/sdf1 3d38e618-2d7b-48f1-b668-f3f24d8ad2b0 ext3 VideoPool /dev/sdf: PTTYPE="dos" /dev/sdg1 5CA8042DA80407EA ntfs geronimo /dev/sdg: PTTYPE="dos" /dev/sdh1 2462a61a-8864-486b-820a-526a870a5452 xfs /dev/sdh: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro) /dev/sdc2 /usr ext4 (rw,errors=remount-ro) /dev/sdd2 /var ext4 (rw,errors=remount-ro) /dev/sda2 /boot ext3 (rw) /dev/sdh1 /work xfs (rw) /dev/sdb2 /srv ext3 (rw,errors=remount-ro) /dev/sde1 /media/video ext3 (rw,errors=remount-ro) =============================== sda1/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 sysfs /sys sysfs defaults 0 0 none /ramdisk tmpfs size=64m 0 0 LABEL=StdRoot / ext4 errors=remount-ro 0 1 LABEL=Squeeze_User /usr ext4 errors=remount-ro 0 2 LABEL=Squeeze_Var /var ext4 errors=remount-ro 0 2 # /boot was on /dev/sda2 during installation LABEL=boot /boot ext3 defaults 0 2 UUID=2462a61a-8864-486b-820a-526a870a5452 /work xfs defaults 0 2 # swap was on /dev/sde1 during installation UUID=e00d97ff-81a9-4741-8c3d-57c4169cd1f5 none swap sw 0 0 # swap was on /dev/sdf1 during installation UUID=1f3a35fb-63dd-497b-baab-3975982389d3 none swap sw 0 0 # swap was on /dev/sdg1 during installation UUID=750773ee-f955-4f36-9c5c-1036adaeafb6 none swap sw 0 0 UUID=85b61063-621b-44eb-8f99-e9834b9b8531 /srv ext3 errors=remount-ro 0 2 UUID=42b730c9-2a57-47a6-b0df-f6758b7f5fa5 /media/video ext3 errors=remount-ro 0 2 UUID=5CA8042DA80407EA /media/dvd ntfs ro,noauto 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 =================== sda1: Location of files loaded by Grub: =================== .0GB: initrd.img .0GB: vmlinuz ============================= sda2/grub/grub.cfg: ============================= # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } terminal_input console terminal_output console set timeout=5 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=cyan/blue set menu_color_highlight=white/blue ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd4,msdos2)' search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro quiet echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd4,msdos2)' search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro single echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Ubuntu, with Linux 2.6.35-22-generic (on /dev/sdc3)" { insmod part_msdos insmod ext2 set root='(hd4,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry "Ubuntu, with Linux 2.6.35-22-generic (recovery mode) (on /dev/sdc3)" { insmod part_msdos insmod ext2 set root='(hd4,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro single initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =================== sda2: Location of files loaded by Grub: =================== 21.5GB: grub/core.img 21.5GB: grub/grub.cfg 21.5GB: initrd.img-2.6.32-5-amd64 21.4GB: vmlinuz-2.6.32-5-amd64 =========================== sda3/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 set locale_dir=($root)/boot/grub/locale set lang=de insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Debian GNU/Linux, with Linux 2.6.32-5-amd64 (on /dev/sdc1)" { insmod part_msdos insmod ext2 set root='(hd2,msdos2)' search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro quiet initrd /initrd.img-2.6.32-5-amd64 } menuentry "Debian GNU/Linux, with Linux 2.6.32-5-amd64 (recovery mode) (on /dev/sdc1)" { insmod part_msdos insmod ext2 set root='(hd2,msdos2)' search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro single initrd /initrd.img-2.6.32-5-amd64 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### menuentry "chainload squeeze from maverick" { insmod part_msdos insmod ext2 set root=(hd2,1) ## using X and Y for /mnt/squeeze/boot linux /grub/core.img ## or /boot/grub/core.img if / and /boot aren't different partitions } ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda3/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb3 during installation UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdd1 during installation UUID=129580e7-04cf-4700-82df-8ef9f6bd8fe7 none swap sw 0 0 # swap was on /dev/sde1 during installation UUID=750773ee-f955-4f36-9c5c-1036adaeafb6 none swap sw 0 0 =================== sda3: Location of files loaded by Grub: =================== 26.4GB: boot/grub/core.img 26.4GB: boot/grub/grub.cfg 37.3GB: boot/initrd.img-2.6.35-22-generic 26.4GB: boot/vmlinuz-2.6.35-22-generic 37.3GB: initrd.img 26.4GB: vmlinuz
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => No boot loader is installed in the MBR of /dev/sda => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #3 for (,msdos3)/boot/grub. => Grub 2 is installed in the MBR of /dev/sdc and looks on the same drive in partition #2 for (,msdos2)/grub. => Testdisk is installed in the MBR of /dev/sdd => No boot loader is installed in the MBR of /dev/sde => No boot loader is installed in the MBR of /dev/sdf => No boot loader is installed in the MBR of /dev/sdg => Windows is installed in the MBR of /dev/sdh sda1: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: xfs Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sdc1: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Debian GNU/Linux 6.0 Boot files/dirs: /etc/fstab sdc2: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: /grub/grub.cfg /grub/core.img sdc3: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdd1: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdd2: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sde1: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sde2: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sdf1: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdf2: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sdg1: _________________________________________________________________________ File system: ext3 Boot sector type: - Boot sector info: Operating System: Boot files/dirs: sdh1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 63 1,465,144,064 1,465,144,002 83 Linux Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 500.1 GB, 500107862016 bytes 81 heads, 63 sectors/track, 191411 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 2,048 976,773,167 976,771,120 83 Linux Drive: sdc ___________________ _____________________________________________________ Disk /dev/sdc: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdc1 63 41,961,779 41,961,717 83 Linux /dev/sdc2 * 41,963,520 42,743,807 780,288 83 Linux /dev/sdc3 42,743,808 78,163,967 35,420,160 83 Linux Drive: sdd ___________________ _____________________________________________________ Disk /dev/sdd: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdd1 * 63 7,807,589 7,807,527 82 Linux swap / Solaris /dev/sdd2 7,807,590 70,734,194 62,926,605 83 Linux Drive: sde ___________________ _____________________________________________________ Disk /dev/sde: 55.0 GB, 55021510656 bytes 255 heads, 63 sectors/track, 6689 cylinders, total 107463888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sde1 63 8,401,994 8,401,932 82 Linux swap / Solaris /dev/sde2 8,401,995 107,458,784 99,056,790 83 Linux Drive: sdf ___________________ _____________________________________________________ Disk /dev/sdf: 150.0 GB, 150039945216 bytes 255 heads, 63 sectors/track, 18241 cylinders, total 293046768 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdf1 2,048 39,063,551 39,061,504 82 Linux swap / Solaris /dev/sdf2 39,063,552 293,046,271 253,982,720 83 Linux Drive: sdg ___________________ _____________________________________________________ Disk /dev/sdg: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdg1 64 976,773,167 976,773,104 83 Linux Drive: sdh ___________________ _____________________________________________________ Disk /dev/sdh: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdh1 * 2,048 3,907,026,943 3,907,024,896 7 HPFS/NTFS blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 42b730c9-2a57-47a6-b0df-f6758b7f5fa5 ext3 /dev/sda: PTTYPE="dos" /dev/sdb1 2462a61a-8864-486b-820a-526a870a5452 xfs /dev/sdb: PTTYPE="dos" /dev/sdc1 7ce6540f-5ffe-445d-9bbf-d41652854700 ext4 StdRoot /dev/sdc2 59c82698-6fcc-4512-a51c-261348d637da ext3 boot /dev/sdc3 b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ext4 /dev/sdc: PTTYPE="dos" /dev/sdd1 750773ee-f955-4f36-9c5c-1036adaeafb6 swap /dev/sdd2 55141d3b-4331-4f4a-b127-8ea77121a483 ext4 Squeeze_Var /dev/sdd: PTTYPE="dos" /dev/sde1 129580e7-04cf-4700-82df-8ef9f6bd8fe7 swap /dev/sde2 44403194-a873-48ac-978c-b08a13c5d756 ext4 Squeeze_User /dev/sde: PTTYPE="dos" /dev/sdf1 e00d97ff-81a9-4741-8c3d-57c4169cd1f5 swap /dev/sdf2 85b61063-621b-44eb-8f99-e9834b9b8531 ext3 /dev/sdf: PTTYPE="dos" /dev/sdg1 3d38e618-2d7b-48f1-b668-f3f24d8ad2b0 ext3 VideoPool /dev/sdg: PTTYPE="dos" /dev/sdh1 5CA8042DA80407EA ntfs geronimo /dev/sdh: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdc1 / ext4 (rw,errors=remount-ro) /dev/sde2 /usr ext4 (rw,errors=remount-ro) /dev/sdd2 /var ext4 (rw,errors=remount-ro) /dev/sdc2 /boot ext3 (rw) /dev/sdb1 /work xfs (rw) /dev/sdf2 /srv ext3 (rw,errors=remount-ro) /dev/sda1 /media/video ext3 (rw,errors=remount-ro) =============================== sdc1/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 sysfs /sys sysfs defaults 0 0 none /ramdisk tmpfs size=64m 0 0 LABEL=StdRoot / ext4 errors=remount-ro 0 1 LABEL=Squeeze_User /usr ext4 errors=remount-ro 0 2 LABEL=Squeeze_Var /var ext4 errors=remount-ro 0 2 # /boot was on /dev/sda2 during installation LABEL=boot /boot ext3 defaults 0 2 UUID=2462a61a-8864-486b-820a-526a870a5452 /work xfs defaults 0 2 # swap was on /dev/sde1 during installation UUID=e00d97ff-81a9-4741-8c3d-57c4169cd1f5 none swap sw 0 0 # swap was on /dev/sdf1 during installation UUID=1f3a35fb-63dd-497b-baab-3975982389d3 none swap sw 0 0 # swap was on /dev/sdg1 during installation UUID=750773ee-f955-4f36-9c5c-1036adaeafb6 none swap sw 0 0 UUID=85b61063-621b-44eb-8f99-e9834b9b8531 /srv ext3 errors=remount-ro 0 2 UUID=42b730c9-2a57-47a6-b0df-f6758b7f5fa5 /media/video ext3 errors=remount-ro 0 2 UUID=5CA8042DA80407EA /media/dvd ntfs ro,noauto 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 =================== sdc1: Location of files loaded by Grub: =================== .0GB: initrd.img .0GB: vmlinuz ============================= sdc2/grub/grub.cfg: ============================= # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } terminal_input console terminal_output console set timeout=5 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=cyan/blue set menu_color_highlight=white/blue ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd4,msdos2)' search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro quiet echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64 (recovery mode)' --class debian --class gnu-linux --class gnu --class os { insmod part_msdos insmod ext2 set root='(hd4,msdos2)' search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da echo 'Loading Linux 2.6.32-5-amd64 ...' linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro single echo 'Loading initial ramdisk ...' initrd /initrd.img-2.6.32-5-amd64 } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Ubuntu, with Linux 2.6.35-22-generic (on /dev/sdc3)" { insmod part_msdos insmod ext2 set root='(hd4,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry "Ubuntu, with Linux 2.6.35-22-generic (recovery mode) (on /dev/sdc3)" { insmod part_msdos insmod ext2 set root='(hd4,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro single initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =================== sdc2: Location of files loaded by Grub: =================== 21.5GB: grub/core.img 21.5GB: grub/grub.cfg 21.5GB: initrd.img-2.6.32-5-amd64 21.4GB: vmlinuz-2.6.32-5-amd64 =========================== sdc3/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 set locale_dir=($root)/boot/grub/locale set lang=de insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd2,msdos3)' search --no-floppy --fs-uuid --set b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Debian GNU/Linux, with Linux 2.6.32-5-amd64 (on /dev/sdc1)" { insmod part_msdos insmod ext2 set root='(hd2,msdos2)' search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro quiet initrd /initrd.img-2.6.32-5-amd64 } menuentry "Debian GNU/Linux, with Linux 2.6.32-5-amd64 (recovery mode) (on /dev/sdc1)" { insmod part_msdos insmod ext2 set root='(hd2,msdos2)' search --no-floppy --fs-uuid --set 59c82698-6fcc-4512-a51c-261348d637da linux /vmlinuz-2.6.32-5-amd64 root=UUID=7ce6540f-5ffe-445d-9bbf-d41652854700 ro single initrd /initrd.img-2.6.32-5-amd64 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### menuentry "chainload squeeze from maverick" { insmod part_msdos insmod ext2 set root=(hd2,1) ## using X and Y for /mnt/squeeze/boot linux /grub/core.img ## or /boot/grub/core.img if / and /boot aren't different partitions } ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdc3/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb3 during installation UUID=b9ad85b7-d8b0-42f9-8c3a-c09a435cbe26 / ext4 errors=remount-ro 0 1 # swap was on /dev/sdd1 during installation UUID=129580e7-04cf-4700-82df-8ef9f6bd8fe7 none swap sw 0 0 # swap was on /dev/sde1 during installation UUID=750773ee-f955-4f36-9c5c-1036adaeafb6 none swap sw 0 0 =================== sdc3: Location of files loaded by Grub: =================== 26.4GB: boot/grub/core.img 26.4GB: boot/grub/grub.cfg 37.3GB: boot/initrd.img-2.6.35-22-generic 26.4GB: boot/vmlinuz-2.6.35-22-generic 37.3GB: initrd.img 26.4GB: vmlinuz