Package: ulatencyd Version: 0.5.0-1 Severity: serious User: [email protected] Usertags: piuparts piuparts.d.o User: [email protected] Usertags: incorrect-dependency
Hi, during a test with piuparts I noticed your package failed to install due to incorrect dependencies in the init.d LSB header. Some debian notes are available from at http://wiki.debian.org/LSBInitScripts From the attached log (scroll to the bottom...): Selecting previously deselected package ulatencyd. (Reading database ... 6279 files and directories currently installed.) Unpacking ulatencyd (from .../ulatencyd_0.5.0-1_amd64.deb) ... Setting up ulatencyd (0.5.0-1) ... insserv: Service dbus has to be enabled to start service ulatencyd insserv: exiting now! update-rc.d: error: insserv rejected the script header dpkg: error processing ulatencyd (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: ulatencyd E: Sub-process /usr/bin/dpkg returned an error code (1) cheers, Holger
Start: 2011-04-14 17:38:16 UTC Package: ulatencyd Priority: optional Section: utils Installed-Size: 552 Maintainer: Alessandro Ghedini <[email protected]> Architecture: amd64 Version: 0.5.0-1 Depends: libc6 (>= 2.7), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.22.0), liblua5.1-0, libpolkit-gobject-1-0 (>= 0.99), libxau6, libxcb1, lua5.1 | lua, liblua5.1-posix1 Filename: pool/main/u/ulatencyd/ulatencyd_0.5.0-1_amd64.deb Size: 116212 MD5sum: d27d7bee47298dcc503963cc495628c0 SHA1: 3136044837e898d1ddbdefb25f9fd979aa50ae4c SHA256: 800898f79108ab43184ffda292837ead0b5abd811f4908fcdbb249e2d385a4ca Description: Daemon to minimize latency on a linux system using cgroups Ulatency is a daemon that controls how the Linux kernel will spend it's resources on the running processes. It uses dynamic cgroups to give the kernel hints and limitations on processes. . It strongly supports the lua scripting language for writing rules and the scheduler code. . The Linux scheduler does a pretty good job to give the available resources to all processes, but this may not be the best user experience in the desktop case. ulatencyd monitors the system and categorizes the running processes into cgroups. Processes that run wild to slow down the system by causing massive swaping will be isolated. Homepage: https://github.com/poelzi/ulatencyd Executing: sudo /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad sid -b sid.tar.gz --mirror http://piatti.debian.org/debian/ ulatencyd Guessed: debian 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile. 0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ 0m0.0s INFO: ------------------------------------------------------------------------------ 0m0.0s INFO: piuparts version 0.40~201104021225 starting up. 0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --warn-symlinks --warn-on-others --skip-logrotatefiles-test --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad sid -b sid.tar.gz --mirror http://piatti.debian.org/debian/ ulatencyd 0m0.0s INFO: Running on: Linux piatti 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpOLMLWl 0m0.0s DEBUG: Unpacking sid.tar.gz into /org/piuparts.debian.org/tmp/tmpOLMLWl 0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpOLMLWl', '-zxf', 'sid.tar.gz'] 0m2.1s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpOLMLWl', '-zxf', 'sid.tar.gz'] 0m2.1s DEBUG: Created policy-rc.d and chmodded it. 0m2.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', 'update'] 0m10.0s DUMP: Get:1 http://piatti.debian.org sid InRelease [151 kB] Ign http://piatti.debian.org sid/main amd64 Packages/DiffIndex Ign http://piatti.debian.org sid/contrib amd64 Packages/DiffIndex Ign http://piatti.debian.org sid/non-free amd64 Packages/DiffIndex Ign http://piatti.debian.org sid/contrib TranslationIndex Ign http://piatti.debian.org sid/main TranslationIndex Ign http://piatti.debian.org sid/non-free TranslationIndex Get:2 http://piatti.debian.org sid/main amd64 Packages [9366 kB] Get:3 http://piatti.debian.org sid/contrib amd64 Packages [73.3 kB] Get:4 http://piatti.debian.org sid/non-free amd64 Packages [138 kB] Ign http://piatti.debian.org sid/contrib Translation-en Ign http://piatti.debian.org sid/main Translation-en Ign http://piatti.debian.org sid/non-free Translation-en Fetched 9729 kB in 1s (7009 kB/s) Reading package lists... 0m10.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', 'update'] 0m10.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'mount', '-t', 'proc', 'proc', '/proc'] 0m10.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'mount', '-t', 'proc', 'proc', '/proc'] 0m10.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', '-yf', 'upgrade'] 0m16.2s DUMP: Reading package lists... Building dependency tree... The following packages will be upgraded: apt base-files dpkg gcc-4.5-base initscripts libncurses5 libslang2 ncurses-base ncurses-bin sysv-rc sysvinit sysvinit-utils 12 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 6505 kB of archives. After this operation, 94.2 kB of additional disk space will be used. Get:1 http://piatti.debian.org/debian/ sid/main base-files amd64 6.3 [68.8 kB] Get:2 http://piatti.debian.org/debian/ sid/main dpkg amd64 1.16.0.1 [2231 kB] Get:3 http://piatti.debian.org/debian/ sid/main ncurses-bin amd64 5.9-1 [333 kB] Get:4 http://piatti.debian.org/debian/ sid/main sysvinit amd64 2.88dsf-13.2 [120 kB] Get:5 http://piatti.debian.org/debian/ sid/main ncurses-base amd64 5.9-1 [197 kB] Get:6 http://piatti.debian.org/debian/ sid/main sysvinit-utils amd64 2.88dsf-13.2 [122 kB] Get:7 http://piatti.debian.org/debian/ sid/main apt amd64 0.8.13.2 [2202 kB] Get:8 http://piatti.debian.org/debian/ sid/main libslang2 amd64 2.2.4-1 [579 kB] Get:9 http://piatti.debian.org/debian/ sid/main sysv-rc amd64 2.88dsf-13.2 [74.2 kB] Get:10 http://piatti.debian.org/debian/ sid/main initscripts amd64 2.88dsf-13.2 [70.4 kB] Get:11 http://piatti.debian.org/debian/ sid/main libncurses5 amd64 5.9-1 [382 kB] Get:12 http://piatti.debian.org/debian/ sid/main gcc-4.5-base amd64 4.5.2-9 [127 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 6505 kB in 0s (44.1 MB/s) (Reading database ... 6172 files and directories currently installed.) Preparing to replace base-files 6.1 (using .../base-files_6.3_amd64.deb) ... Unpacking replacement base-files ... Setting up base-files (6.3) ... (Reading database ... 6172 files and directories currently installed.) Preparing to replace dpkg 1.16.0 (using .../dpkg_1.16.0.1_amd64.deb) ... Unpacking replacement dpkg ... Setting up dpkg (1.16.0.1) ... (Reading database ... 6172 files and directories currently installed.) Preparing to replace ncurses-bin 5.8+20110307-1 (using .../ncurses-bin_5.9-1_amd64.deb) ... Unpacking replacement ncurses-bin ... Setting up ncurses-bin (5.9-1) ... (Reading database ... 6172 files and directories currently installed.) Preparing to replace sysvinit 2.88dsf-13.1 (using .../sysvinit_2.88dsf-13.2_amd64.deb) ... Unpacking replacement sysvinit ... Setting up sysvinit (2.88dsf-13.2) ... init: timeout opening/writing control channel /dev/initctl (Reading database ... 6172 files and directories currently installed.) Preparing to replace ncurses-base 5.8+20110307-1 (using .../ncurses-base_5.9-1_amd64.deb) ... Unpacking replacement ncurses-base ... Setting up ncurses-base (5.9-1) ... (Reading database ... 6172 files and directories currently installed.) Preparing to replace sysvinit-utils 2.88dsf-13.1 (using .../sysvinit-utils_2.88dsf-13.2_amd64.deb) ... Unpacking replacement sysvinit-utils ... Setting up sysvinit-utils (2.88dsf-13.2) ... (Reading database ... 6172 files and directories currently installed.) Preparing to replace apt 0.8.13 (using .../apt_0.8.13.2_amd64.deb) ... Unpacking replacement apt ... Setting up apt (0.8.13.2) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... gpg: key F42584E6: "Lenny Stable Release Key <[email protected]>" not changed gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <[email protected]>" not changed gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed gpg: key B98321F9: "Squeeze Stable Release Key <[email protected]>" not changed gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <[email protected]>" not changed gpg: Total number processed: 5 gpg: unchanged: 5 (Reading database ... 6172 files and directories currently installed.) Preparing to replace libslang2 2.2.2-4 (using .../libslang2_2.2.4-1_amd64.deb) ... Unpacking replacement libslang2 ... Setting up libslang2 (2.2.4-1) ... (Reading database ... 6172 files and directories currently installed.) Preparing to replace sysv-rc 2.88dsf-13.1 (using .../sysv-rc_2.88dsf-13.2_amd64.deb) ... Unpacking replacement sysv-rc ... Setting up sysv-rc (2.88dsf-13.2) ... (Reading database ... 6172 files and directories currently installed.) Preparing to replace initscripts 2.88dsf-13.1 (using .../initscripts_2.88dsf-13.2_amd64.deb) ... Unpacking replacement initscripts ... Setting up initscripts (2.88dsf-13.2) ... (Reading database ... 6172 files and directories currently installed.) Preparing to replace libncurses5 5.8+20110307-1 (using .../libncurses5_5.9-1_amd64.deb) ... Unpacking replacement libncurses5 ... Setting up libncurses5 (5.9-1) ... (Reading database ... 6172 files and directories currently installed.) Preparing to replace gcc-4.5-base 4.5.2-8 (using .../gcc-4.5-base_4.5.2-9_amd64.deb) ... Unpacking replacement gcc-4.5-base ... Setting up gcc-4.5-base (4.5.2-9) ... 0m16.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', '-yf', 'upgrade'] 0m16.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', 'clean'] 0m16.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', 'clean'] 0m16.3s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpOLMLWl/tmp/scripts/ 0m16.3s INFO: Running scripts post_setup 0m16.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'dpkg', '--get-selections', '*'] 0m16.9s DUMP: apt install base-files install base-passwd install bash install bsdutils install coreutils install dash install debconf install debconf-i18n install debian-archive-keyring install debianutils install diffutils install dpkg install e2fslibs install e2fsprogs install findutils install gcc-4.4-base install gcc-4.5-base install gcc-4.6-base install gnupg install gpgv install grep install gzip install hostname install initscripts install insserv install libacl1 install libattr1 install libblkid1 install libbz2-1.0 install libc-bin install libc6 install libcomerr2 install libdb4.8 install libgcc1 install liblocale-gettext-perl install liblzma2 install libncurses5 install libpam-modules install libpam-runtime install libpam0g install libreadline6 install libselinux1 install libsepol1 install libslang2 install libss2 install libstdc++6 install libtext-charwidth-perl install libtext-iconv-perl install libtext-wrapi18n-perl install libusb-0.1-4 install libuuid1 install login install lsb-base install mawk install mount install ncurses-base install ncurses-bin install passwd install perl-base install readline-common install sed install sensible-utils install sysv-rc install sysvinit install sysvinit-utils install tar install tzdata install util-linux install xz-utils install zlib1g install 0m16.9s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'dpkg', '--get-selections', '*'] 0m16.9s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-cache', 'show', 'ulatencyd'] 0m17.0s DUMP: Package: ulatencyd Priority: optional Section: utils Installed-Size: 552 Maintainer: Alessandro Ghedini <[email protected]> Architecture: amd64 Version: 0.5.0-1 Depends: libc6 (>= 2.7), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.22.0), liblua5.1-0, libpolkit-gobject-1-0 (>= 0.99), libxau6, libxcb1, lua5.1 | lua, liblua5.1-posix1 Filename: pool/main/u/ulatencyd/ulatencyd_0.5.0-1_amd64.deb Size: 116212 MD5sum: d27d7bee47298dcc503963cc495628c0 SHA1: 3136044837e898d1ddbdefb25f9fd979aa50ae4c SHA256: 800898f79108ab43184ffda292837ead0b5abd811f4908fcdbb249e2d385a4ca Description: Daemon to minimize latency on a linux system using cgroups Ulatency is a daemon that controls how the Linux kernel will spend it's resources on the running processes. It uses dynamic cgroups to give the kernel hints and limitations on processes. . It strongly supports the lua scripting language for writing rules and the scheduler code. . The Linux scheduler does a pretty good job to give the available resources to all processes, but this may not be the best user experience in the desktop case. ulatencyd monitors the system and categorizes the running processes into cgroups. Processes that run wild to slow down the system by causing massive swaping will be isolated. Homepage: https://github.com/poelzi/ulatencyd 0m17.0s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-cache', 'show', 'ulatencyd'] 0m17.0s DEBUG: Starting command: ['dpkg-deb', '-b', '/org/piuparts.debian.org/tmp/tmpctWnjd/piuparts-depends-dummy'] 0m17.0s DUMP: dpkg-deb: building package `piuparts-depends-dummy' in `/org/piuparts.debian.org/tmp/tmpctWnjd/piuparts-depends-dummy.deb'. 0m17.0s DEBUG: Command ok: ['dpkg-deb', '-b', '/org/piuparts.debian.org/tmp/tmpctWnjd/piuparts-depends-dummy'] 0m17.0s DEBUG: Copying /org/piuparts.debian.org/tmp/tmpctWnjd/piuparts-depends-dummy.deb to /org/piuparts.debian.org/tmp/tmpOLMLWl/tmp 0m17.0s INFO: Running scripts pre_install 0m17.0s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'tmp/scripts/pre_install_exceptions'] 0m17.1s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 0m17.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'tmp/scripts/pre_install_exceptions'] 0m17.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m17.1s DUMP: Selecting previously deselected package piuparts-depends-dummy. (Reading database ... 6172 files and directories currently installed.) Unpacking piuparts-depends-dummy (from tmp/piuparts-depends-dummy.deb) ... dpkg: dependency problems prevent configuration of piuparts-depends-dummy: piuparts-depends-dummy depends on libdbus-1-3 (>= 1.0.2); however: Package libdbus-1-3 is not installed. piuparts-depends-dummy depends on libdbus-glib-1-2 (>= 0.78); however: Package libdbus-glib-1-2 is not installed. piuparts-depends-dummy depends on libglib2.0-0 (>= 2.22.0); however: Package libglib2.0-0 is not installed. piuparts-depends-dummy depends on liblua5.1-0; however: Package liblua5.1-0 is not installed. piuparts-depends-dummy depends on libpolkit-gobject-1-0 (>= 0.99); however: Package libpolkit-gobject-1-0 is not installed. piuparts-depends-dummy depends on libxau6; however: Package libxau6 is not installed. piuparts-depends-dummy depends on libxcb1; however: Package libxcb1 is not installed. piuparts-depends-dummy depends on lua5.1 | lua; however: Package lua5.1 is not installed. Package lua is not installed. piuparts-depends-dummy depends on liblua5.1-posix1; however: Package liblua5.1-posix1 is not installed. dpkg: error processing piuparts-depends-dummy (--install): dependency problems - leaving unconfigured Errors were encountered while processing: piuparts-depends-dummy 0m17.1s DEBUG: Command failed (status=1), but ignoring error: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'dpkg', '-i', 'tmp/piuparts-depends-dummy.deb'] 0m17.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', '-yf', 'install'] 0m18.7s DUMP: Reading package lists... Building dependency tree... Reading state information... Correcting dependencies... Done The following extra packages will be installed: libdbus-1-3 libdbus-glib-1-2 libglib2.0-0 liblua5.1-0 liblua5.1-posix1 libpcre3 libpolkit-gobject-1-0 libxau6 libxcb1 libxdmcp6 lua5.1 Recommended packages: dbus libglib2.0-data shared-mime-info The following NEW packages will be installed: libdbus-1-3 libdbus-glib-1-2 libglib2.0-0 liblua5.1-0 liblua5.1-posix1 libpcre3 libpolkit-gobject-1-0 libxau6 libxcb1 libxdmcp6 lua5.1 0 upgraded, 11 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 2626 kB of archives. After this operation, 5886 kB of additional disk space will be used. Get:1 http://piatti.debian.org/debian/ sid/main libdbus-1-3 amd64 1.4.6-1 [156 kB] Get:2 http://piatti.debian.org/debian/ sid/main libpcre3 amd64 8.12-3 [258 kB] Get:3 http://piatti.debian.org/debian/ sid/main libglib2.0-0 amd64 2.28.6-1 [1648 kB] Get:4 http://piatti.debian.org/debian/ sid/main libdbus-glib-1-2 amd64 0.92-1 [181 kB] Get:5 http://piatti.debian.org/debian/ sid/main liblua5.1-0 amd64 5.1.4-5 [88.7 kB] Get:6 http://piatti.debian.org/debian/ sid/main libpolkit-gobject-1-0 amd64 0.101-3 [46.1 kB] Get:7 http://piatti.debian.org/debian/ sid/main libxau6 amd64 1:1.0.6-1 [16.8 kB] Get:8 http://piatti.debian.org/debian/ sid/main libxdmcp6 amd64 1:1.1.0-1 [22.5 kB] Get:9 http://piatti.debian.org/debian/ sid/main libxcb1 amd64 1.7-2 [44.5 kB] Get:10 http://piatti.debian.org/debian/ sid/main lua5.1 amd64 5.1.4-5 [145 kB] Get:11 http://piatti.debian.org/debian/ sid/main liblua5.1-posix1 amd64 5.1.4-3 [19.5 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 2626 kB in 0s (14.8 MB/s) Selecting previously deselected package libdbus-1-3. (Reading database ... 6172 files and directories currently installed.) Unpacking libdbus-1-3 (from .../libdbus-1-3_1.4.6-1_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_8.12-3_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.28.6-1_amd64.deb) ... Selecting previously deselected package libdbus-glib-1-2. Unpacking libdbus-glib-1-2 (from .../libdbus-glib-1-2_0.92-1_amd64.deb) ... Selecting previously deselected package liblua5.1-0. Unpacking liblua5.1-0 (from .../liblua5.1-0_5.1.4-5_amd64.deb) ... Selecting previously deselected package libpolkit-gobject-1-0. Unpacking libpolkit-gobject-1-0 (from .../libpolkit-gobject-1-0_0.101-3_amd64.deb) ... Selecting previously deselected package libxau6. Unpacking libxau6 (from .../libxau6_1%3a1.0.6-1_amd64.deb) ... Selecting previously deselected package libxdmcp6. Unpacking libxdmcp6 (from .../libxdmcp6_1%3a1.1.0-1_amd64.deb) ... Selecting previously deselected package libxcb1. Unpacking libxcb1 (from .../libxcb1_1.7-2_amd64.deb) ... Selecting previously deselected package lua5.1. Unpacking lua5.1 (from .../lua5.1_5.1.4-5_amd64.deb) ... Selecting previously deselected package liblua5.1-posix1. Unpacking liblua5.1-posix1 (from .../liblua5.1-posix1_5.1.4-3_amd64.deb) ... Setting up libdbus-1-3 (1.4.6-1) ... Setting up libpcre3 (8.12-3) ... Setting up libglib2.0-0 (2.28.6-1) ... No schema files found: doing nothing. Setting up libdbus-glib-1-2 (0.92-1) ... Setting up liblua5.1-0 (5.1.4-5) ... Setting up libpolkit-gobject-1-0 (0.101-3) ... Setting up libxau6 (1:1.0.6-1) ... Setting up libxdmcp6 (1:1.1.0-1) ... Setting up libxcb1 (1.7-2) ... Setting up lua5.1 (5.1.4-5) ... update-alternatives: using /usr/bin/lua5.1 to provide /usr/bin/lua (lua-interpreter) in auto mode. update-alternatives: using /usr/bin/luac5.1 to provide /usr/bin/luac (lua-compiler) in auto mode. Setting up liblua5.1-posix1 (5.1.4-3) ... Setting up piuparts-depends-dummy (0.invalid.0) ... 0m18.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', '-yf', 'install'] 0m18.7s INFO: Installation of ['tmp/piuparts-depends-dummy.deb'] ok 0m18.7s INFO: Running scripts post_install 0m18.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', 'clean'] 0m18.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', 'clean'] 0m18.7s DEBUG: Removing /org/piuparts.debian.org/tmp/tmpOLMLWl/tmp/piuparts-depends-dummy.deb 0m18.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m18.7s DUMP: (Reading database ... 6279 files and directories currently installed.) Removing piuparts-depends-dummy ... 0m18.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'dpkg', '--purge', 'piuparts-depends-dummy'] 0m18.7s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'dpkg', '--remove', '--pending'] 0m18.7s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'dpkg', '--remove', '--pending'] 0m19.3s INFO: Running scripts pre_install 0m19.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'tmp/scripts/pre_install_exceptions'] 0m19.4s DUMP: Debug: running script tmp/scripts/pre_install_exceptions Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully yes: standard output: Broken pipe yes: write error 0m19.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'tmp/scripts/pre_install_exceptions'] 0m19.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', '-y', 'install', 'ulatencyd'] 0m20.2s DUMP: Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: ulatencyd 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 116 kB of archives. After this operation, 565 kB of additional disk space will be used. Get:1 http://piatti.debian.org/debian/ sid/main ulatencyd amd64 0.5.0-1 [116 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 116 kB in 0s (0 B/s) Selecting previously deselected package ulatencyd. (Reading database ... 6279 files and directories currently installed.) Unpacking ulatencyd (from .../ulatencyd_0.5.0-1_amd64.deb) ... Setting up ulatencyd (0.5.0-1) ... insserv: Service dbus has to be enabled to start service ulatencyd insserv: exiting now! update-rc.d: error: insserv rejected the script header dpkg: error processing ulatencyd (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: ulatencyd E: Sub-process /usr/bin/dpkg returned an error code (1) 0m20.2s ERROR: Command failed (status=100): ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'apt-get', '-y', 'install', 'ulatencyd'] Reading package lists... Building dependency tree... Reading state information... The following NEW packages will be installed: ulatencyd 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 116 kB of archives. After this operation, 565 kB of additional disk space will be used. Get:1 http://piatti.debian.org/debian/ sid/main ulatencyd amd64 0.5.0-1 [116 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 116 kB in 0s (0 B/s) Selecting previously deselected package ulatencyd. (Reading database ... 6279 files and directories currently installed.) Unpacking ulatencyd (from .../ulatencyd_0.5.0-1_amd64.deb) ... Setting up ulatencyd (0.5.0-1) ... insserv: Service dbus has to be enabled to start service ulatencyd insserv: exiting now! update-rc.d: error: insserv rejected the script header dpkg: error processing ulatencyd (--configure): subprocess installed post-installation script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: ulatencyd E: Sub-process /usr/bin/dpkg returned an error code (1) 0m20.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'umount', '/proc'] 0m20.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpOLMLWl', 'umount', '/proc'] 0m20.6s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpOLMLWl End: 2011-04-14 17:38:37 UTC
signature.asc
Description: This is a digitally signed message part.
