Package: linux-2.6 Version: 2.6.38-5 Severity: normal
No sound due to failures loading kernel modules. Neither rebooting nor reinstalling kernel packages seem to fix the issue. -- Package-specific info: ** Version: Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) ([email protected]) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=/dev/mapper/yuki-root ro quiet splash ** Not tainted ** Kernel log: [ 2.640678] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.640879] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.640885] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.645152] scsi0 : ahci [ 2.645391] scsi1 : ahci [ 2.645526] scsi2 : ahci [ 2.645661] scsi3 : ahci [ 2.645794] scsi4 : ahci [ 2.645928] scsi5 : ahci [ 2.646032] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22 [ 2.646037] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22 [ 2.646043] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22 [ 2.646049] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22 [ 2.646055] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 22 [ 2.646061] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 22 [ 2.692280] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 2.870709] usb 3-1: New USB device found, idVendor=04d9, idProduct=2519 [ 2.870715] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.870719] usb 3-1: Product: VISENTA V1 [ 2.952434] input: VISENTA V1 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2 [ 2.952547] generic-usb 0003:04D9:2519.0001: input,hidraw0: USB HID v1.10 Keyboard [VISENTA V1 ] on usb-0000:00:12.0-1/input0 [ 2.967499] input: VISENTA V1 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3 [ 2.967647] generic-usb 0003:04D9:2519.0002: input,hidraw1: USB HID v1.10 Mouse [VISENTA V1 ] on usb-0000:00:12.0-1/input1 [ 2.967676] usbcore: registered new interface driver usbhid [ 2.967679] usbhid: USB HID core driver [ 2.972287] ata2: SATA link down (SStatus 0 SControl 300) [ 2.972331] ata3: SATA link down (SStatus 0 SControl 300) [ 2.972375] ata6: SATA link down (SStatus 0 SControl 300) [ 2.972410] ata4: SATA link down (SStatus 0 SControl 300) [ 2.972472] ata5: SATA link down (SStatus 0 SControl 300) [ 3.016272] usb 4-3: new full speed USB device using ohci_hcd and address 2 [ 3.144284] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.145426] ata1.00: ATA-8: ADATA S596 Turbo, 100730, max UDMA/133 [ 3.145431] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3.146922] ata1.00: configured for UDMA/133 [ 3.147176] scsi 0:0:0:0: Direct-Access ATA ADATA S596 Turbo 1007 PQ: 0 ANSI: 5 [ 3.168203] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 3.168347] sd 0:0:0:0: [sda] Write Protect is off [ 3.168353] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.168415] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.169556] sda: sda1 sda2 < sda5 > [ 3.170151] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.190552] usb 4-3: New USB device found, idVendor=0a12, idProduct=0001 [ 3.190559] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.190563] usb 4-3: Product: Bluetooth V2.0 Dongle [ 3.190567] usb 4-3: Manufacturer: Bluetooth v2.0 [ 4.345791] device-mapper: uevent: version 1.0.3 [ 4.346170] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected] [ 4.544394] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 4.856703] <30>udevd[405]: starting version 168 [ 4.994013] rfkill: Unknown symbol kstrtoull (err 0) [ 5.005446] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.030618] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602 [ 5.030629] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 5.031424] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.039741] ACPI: acpi_idle registered with cpuidle [ 5.039810] ACPI: processor limited to max C-state 1 [ 5.169105] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 5.181817] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.182640] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 5.191352] MCE: In-kernel MCE decoding enabled. [ 5.196828] psmouse: Unknown symbol kstrtoull (err 0) [ 5.209381] rfkill: Unknown symbol kstrtoull (err 0) [ 5.212741] rfkill: Unknown symbol kstrtoull (err 0) [ 5.217373] rfkill: Unknown symbol kstrtoull (err 0) [ 5.220067] edac_core: Unknown symbol kstrtoull (err 0) [ 5.220568] edac_core: Unknown symbol kstrtoll (err 0) [ 5.235256] rfkill: Unknown symbol kstrtoull (err 0) [ 5.338699] snd_hda_codec: Unknown symbol kstrtoull (err 0) [ 5.344132] snd_hda_codec: Unknown symbol kstrtoull (err 0) [ 5.353022] snd_hda_codec: Unknown symbol kstrtoull (err 0) [ 5.358674] snd_hda_codec: Unknown symbol kstrtoull (err 0) [ 5.841460] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 5.862121] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro [ 5.935758] loop: module loaded [ 6.604188] Adding 1310716k swap on /dev/mapper/yuki-swap_1. Priority:-1 extents:1 across:1310716k [ 6.932391] sunrpc: Unknown symbol kstrtoull (err 0) [ 6.944078] sunrpc: Unknown symbol kstrtoull (err 0) [ 6.957731] sunrpc: Unknown symbol kstrtoull (err 0) [ 7.030252] fuse: Unknown symbol kstrtoull (err 0) [ 7.378429] r8169 0000:03:00.0: eth0: link down [ 7.378444] r8169 0000:03:00.0: eth0: link down [ 7.379096] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.524184] sunrpc: Unknown symbol kstrtoull (err 0) [ 7.553171] sunrpc: Unknown symbol kstrtoull (err 0) [ 7.582119] sunrpc: Unknown symbol kstrtoull (err 0) [ 7.981195] powernow_k8: Unknown symbol kstrtoull (err 0) [ 8.441069] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5 [ 8.569437] rfkill: Unknown symbol kstrtoull (err 0) [ 8.571356] rfkill: Unknown symbol kstrtoull (err 0) [ 8.613409] rfkill: Unknown symbol kstrtoull (err 0) [ 8.641311] rfkill: Unknown symbol kstrtoull (err 0) [ 8.677811] rfkill: Unknown symbol kstrtoull (err 0) [ 8.695157] rfkill: Unknown symbol kstrtoull (err 0) [ 8.741212] lp: driver loaded but no devices found [ 8.755216] ppdev: user-space parallel port driver [ 9.222824] r8169 0000:03:00.0: eth0: link up [ 9.223384] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 11.458445] EXT4-fs (dm-0): re-mounted. Opts: discard,errors=remount-ro,commit=0 [ 19.424091] eth0: no IPv6 routers present ** Model information sys_vendor: To Be Filled By O.E.M. product_name: To Be Filled By O.E.M. product_version: To Be Filled By O.E.M. chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: 080015 board_vendor: ZOTAC board_name: RS780 board_version: ** Loaded modules: Module Size Used by parport_pc 22191 0 ppdev 12725 0 lp 17190 0 parport 31650 3 parport_pc,ppdev,lp mperf 12411 0 cpufreq_userspace 12576 0 cpufreq_conservative 13878 0 cpufreq_stats 12713 0 cpufreq_powersave 12454 0 autofs4 27310 1 binfmt_misc 12914 1 uinput 17392 1 exportfs 12591 0 loop 22515 0 snd_hwdep 13148 0 snd_pcm 67327 0 snd_seq 44678 0 snd_timer 22658 2 snd_pcm,snd_seq snd_seq_device 13155 1 snd_seq joydev 17138 0 pcspkr 12579 0 serio_raw 12878 0 k8temp 12531 0 edac_mce_amd 17103 0 snd 52280 5 snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device i2c_piix4 12536 0 soundcore 13014 1 snd snd_page_alloc 12969 1 snd_pcm processor 27431 0 shpchp 31221 0 thermal_sys 17939 1 processor evdev 17475 10 pci_hotplug 26711 1 shpchp ext4 285166 1 mbcache 12930 1 ext4 jbd2 65157 1 ext4 crc16 12343 1 ext4 dm_mod 62467 6 sd_mod 35501 2 crc_t10dif 12348 1 sd_mod usbhid 39900 0 hid 72616 1 usbhid radeon 717227 2 ahci 25089 1 ohci_hcd 26400 0 libahci 22568 1 ahci libata 147240 2 ahci,libahci ttm 52155 1 radeon drm_kms_helper 26893 1 radeon scsi_mod 161457 2 sd_mod,libata drm 165567 4 radeon,ttm,drm_kms_helper i2c_algo_bit 12834 1 radeon ehci_hcd 39529 0 usbcore 122908 4 usbhid,ohci_hcd,ehci_hcd i2c_core 23725 5 i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit r8169 37209 0 power_supply 13475 1 radeon mii 12634 1 r8169 nls_base 12753 1 usbcore button 12994 0 ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:01:2e:bc:78:b4 brd ff:ff:ff:ff:ff:ff inet 192.168.0.167/24 brd 192.168.0.255 scope global eth0 inet6 fe80::201:2eff:febc:78b4/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1920 32 0 0 0 0 0 0 1920 32 0 0 0 0 0 0 eth0: 323456873 216527 0 0 0 0 0 0 6685893 95943 0 0 0 0 0 0 *** Protocol statistics: Ip: 156275 total packets received 2 with invalid addresses 0 forwarded 0 incoming packets discarded 156259 incoming packets delivered 95913 requests sent out Icmp: 11 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 8 echo requests: 1 echo replies: 2 11 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 8 echo request: 2 echo replies: 1 IcmpMsg: InType0: 2 InType3: 8 InType8: 1 OutType0: 1 OutType3: 8 OutType8: 2 Tcp: 20 active connections openings 4 passive connection openings 2 failed connection attempts 0 connection resets received 1 connections established 156150 segments received 95835 segments send out 0 segments retransmited 0 bad segments received. 2 resets sent Udp: 64 packets received 8 packets to unknown port received. 0 packet receive errors 67 packets sent UdpLite: TcpExt: 8 TCP sockets finished time wait in fast timer 21 delayed acks sent 2 packets directly queued to recvmsg prequeue. 147745 packet headers predicted 173 acknowledgments not containing data payload received 1790 predicted acknowledgments IpExt: InMcastPkts: 16 OutMcastPkts: 13 InBcastPkts: 28 InOctets: 317296433 OutOctets: 5339030 InMcastOctets: 3725 OutMcastOctets: 3281 InBcastOctets: 6511 *** Device features: eth0: 0x4180 lo: 0x13865 ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe800000-fe9fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) [1022:9605] (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0]) Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at b000 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8000 [size=16] Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: ATI Technologies Inc Device [1002:4397] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc Device [1002:4398] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc Device [1002:4399] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe7f7000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: piix4_smbus 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: ATI Technologies Inc Device [1002:4384] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 14 Region 0: Memory at fe7f0000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] Subsystem: ATI Technologies Inc Device [1002:4383] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: ATI Technologies Inc Device [1002:4396] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe7f6000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k8temp 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device [1002:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at d000 [size=256] Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia controller [1002:960f] Subsystem: ATI Technologies Inc RS780 Azalia controller [1002:960f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 7 Region 0: Memory at fe9e8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: AzureWave Device [1a3b:1089] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: ZOTAC International (MCO) Ltd. Device [19da:8168] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K] Expansion ROM at febe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 04d9:2519 Holtek Semiconductor, Inc. Bus 004 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.38-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.39 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.2 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-2-amd64 recommends: ii firmware-linux-free 3 Binary firmware for various driver Versions of packages linux-image-2.6.38-2-amd64 suggests: ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version pn linux-doc-2.6.38 <none> (no description available) Versions of packages linux-image-2.6.38-2-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.29 Binary firmware for various driver ii firmware-linux-nonfree 0.29 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64: linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64: linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
