Package: linux-2.6
Version: 2.6.39-1+b1
Severity: wishlist

Hi!

Please include CONFIG_IP_SET. This allows use of sets of IP with
Netfilter. Those sets can be modified on the fly with "ipset" (whose
correct version is not yet packaged in Debian). 

-- Package-specific info:
** Version:
Linux version 2.6.39-1-amd64 (Debian 2.6.39-1) 
(buildd_amd64-bra...@buildd.debian.org) (gcc version 4.4.6 (Debian 4.4.6-3) ) 
#1 SMP Tue May 24 14:34:19 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.39-1-amd64 root=/dev/mapper/naruto-root ro quiet splash

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[    4.792165] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 
Keyboard [HID 0a5c:4502] on usb-0000:00:1a.7-1.4.1/input0
[    4.864132] usb 1-1.4.2: new full speed USB device number 6 using ehci_hcd
[    4.958758] usb 1-1.4.2: New USB device found, idVendor=0a5c, idProduct=4503
[    4.958761] usb 1-1.4.2: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[    4.961418] input: HID 0a5c:4503 as 
/devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/input/input5
[    4.961472] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 
Mouse [HID 0a5c:4503] on usb-0000:00:1a.7-1.4.2/input0
[    5.032135] usb 1-1.4.3: new full speed USB device number 7 using ehci_hcd
[    5.127503] usb 1-1.4.3: New USB device found, idVendor=0a5c, idProduct=2148
[    5.127507] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[    5.127509] usb 1-1.4.3: Product: BCM92046DG-CL1ROM
[    5.127511] usb 1-1.4.3: Manufacturer: Broadcom Corp
[    5.127513] usb 1-1.4.3: SerialNumber: 000272A8445E
[    5.671740] udevd[321]: starting version 170
[    6.116519] wmi: Mapper loaded
[    6.122370] dcdbas dcdbas: Dell Systems Management Base Driver (version 
5.6.0-3.2)
[    6.150273] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 
18
[    6.208632] ACPI: acpi_idle registered with cpuidle
[    6.213186] Monitor-Mwait will be used to enter C-1 state
[    6.215367] parport_pc 00:06: reported by Plug and Play ACPI
[    6.215420] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    6.228771] input: Dell WMI hotkeys as /devices/virtual/input/input6
[    6.726304] Bluetooth: Core ver 2.16
[    6.726322] NET: Registered protocol family 31
[    6.726323] Bluetooth: HCI device and connection manager initialized
[    6.726325] Bluetooth: HCI socket layer initialized
[    6.726327] Bluetooth: L2CAP socket layer initialized
[    6.726362] Bluetooth: SCO socket layer initialized
[    6.757542] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    6.757686] usbcore: registered new interface driver btusb
[    6.788582] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 
16
[    6.788625] HDA Intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[    6.788647] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.345492] input: HDA Digital PCBeep as 
/devices/pci0000:00/0000:00:1b.0/input/input7
[    8.164013] CE: hpet4 increased min_delta_ns to 7500 nsec
[    8.164019] CE: hpet4 increased min_delta_ns to 11250 nsec
[    8.488911] EXT3-fs (dm-0): using internal journal
[    8.618898] loop: module loaded
[    9.503199] Adding 511996k swap on /dev/mapper/naruto-swap_1.  Priority:-1 
extents:1 across:511996k 
[   12.044003] CE: hpet2 increased min_delta_ns to 7500 nsec
[   12.044011] CE: hpet2 increased min_delta_ns to 11250 nsec
[   12.044014] hrtimer: interrupt took 5350 ns
[   12.404005] CE: hpet3 increased min_delta_ns to 7500 nsec
[   12.404011] CE: hpet3 increased min_delta_ns to 11250 nsec
[   12.415423] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: 
(null)
[   12.420030] EXT3-fs: barriers not enabled
[   12.421921] kjournald starting.  Commit interval 5 seconds
[   12.422483] EXT3-fs (dm-4): using internal journal
[   12.422487] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[   12.450120] EXT3-fs: barriers not enabled
[   12.457774] kjournald starting.  Commit interval 5 seconds
[   12.457971] EXT3-fs (dm-2): using internal journal
[   12.457975] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[   12.483022] EXT3-fs: barriers not enabled
[   12.490909] kjournald starting.  Commit interval 5 seconds
[   12.491121] EXT3-fs (dm-3): using internal journal
[   12.491125] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[   12.503416] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: 
(null)
[   12.538334] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: 
(null)
[   12.668878] EXT3-fs: barriers not enabled
[   12.669037] kjournald starting.  Commit interval 5 seconds
[   12.669209] EXT3-fs (sda5): using internal journal
[   12.669213] EXT3-fs (sda5): mounted filesystem with ordered data mode
[   15.541556] Bridge firewalling registered
[   15.587790] device eth0 entered promiscuous mode
[   15.652526] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.654966] ADDRCONF(NETDEV_UP): br0: link is not ready
[   15.656270] e100 0000:03:00.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[   15.656791] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   15.656978] br0: port 1(eth0) entering forwarding state
[   15.656981] br0: port 1(eth0) entering forwarding state
[   15.657384] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   16.131719] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.392215] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[   17.448044] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[   17.448564] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   17.613161] fuse init (API version 7.16)
[   18.507072] Disabling lock debugging due to kernel taint
[   18.527283] vboxdrv: Found 4 processor cores.
[   18.527525] vboxdrv: fAsync=0 offMin=0x3f0 offMax=0x50a8
[   18.528093] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 
'normal'.
[   18.528095] vboxdrv: Successfully loaded version 4.0.8_Debian (interface 
0x00180000).
[   18.577793] vboxnet0: Features changed: 0x00004800 -> 0x00004000
[   19.596856] e1000e: eth1 NIC Link is Up 10 Mbps Half Duplex, Flow Control: 
None
[   19.596912] e1000e 0000:00:19.0: eth1: Autonegotiated half duplex but link 
partner cannot autoneg.  Try forcing full duplex if link gets many collisions.
[   19.596914] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[   19.597363] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   21.827637] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.827639] Bluetooth: BNEP filters: protocol multicast
[   21.867546] Bluetooth: RFCOMM TTY layer initialized
[   21.867549] Bluetooth: RFCOMM socket layer initialized
[   21.867551] Bluetooth: RFCOMM ver 1.11
[   23.251763] lp0: using parport0 (interrupt-driven).
[   23.280701] ppdev: user-space parallel port driver
[   29.656009] eth1: no IPv6 routers present
[   39.747896] EXT4-fs (dm-5): re-mounted. Opts: commit=0
[   41.206638] EXT4-fs (dm-7): re-mounted. Opts: commit=0
[   41.208213] EXT4-fs (dm-6): re-mounted. Opts: commit=0
[   65.440003] CE: hpet5 increased min_delta_ns to 7500 nsec
[   65.440010] CE: hpet5 increased min_delta_ns to 11250 nsec
[ 6782.367765] Netfilter messages via NETLINK v0.30.

** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 780                 
product_version: 
chassis_vendor: Dell Inc.
chassis_version: 
bios_vendor: Dell Inc.
bios_version: A01
board_vendor: Dell Inc.
board_name: 0C27VV
board_version: A00

** Loaded modules:
Module                  Size  Used by
nfnetlink              12906  0 
mperf                  12411  0 
cpufreq_userspace      12576  0 
cpufreq_conservative    13147  0 
cpufreq_powersave      12454  0 
cpufreq_stats          12713  0 
ppdev                  12725  0 
lp                     17190  0 
cn                     12933  1 
rfcomm                 32744  8 
bnep                   17424  2 
snd_hrtimer            12604  1 
vboxnetadp             13185  0 
vboxnetflt             24179  0 
vboxdrv               178736  2 vboxnetadp,vboxnetflt
fuse                   61554  1 
xt_tcpudp              12527  4 
iptable_filter         12536  1 
xt_NFQUEUE             12544  4 
ip_tables              21818  1 iptable_filter
x_tables               18886  4 xt_tcpudp,iptable_filter,xt_NFQUEUE,ip_tables
bridge                 65573  0 
stp                    12392  1 bridge
ext4                  317207  3 
jbd2                   65105  1 ext4
coretemp               12784  0 
r8169                  37356  0 
loop                   22479  0 
kvm_intel              49912  0 
kvm                   263518  1 kvm_intel
snd_hda_codec_analog    77600  1 
snd_hda_intel          25946  0 
snd_hda_codec          67865  2 snd_hda_codec_analog,snd_hda_intel
btusb                  17417  1 
bluetooth             107224  23 rfcomm,bnep,btusb
snd_hwdep              13148  1 snd_hda_codec
snd_pcm                67276  2 snd_hda_intel,snd_hda_codec
psmouse                55199  0 
snd_seq                44678  1 
rfkill                 19014  3 bluetooth
snd_timer              22658  3 snd_hrtimer,snd_pcm,snd_seq
snd_seq_device         13155  1 snd_seq
snd                    52324  9 
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore              13014  1 snd
serio_raw              12878  0 
crc16                  12343  2 ext4,bluetooth
snd_page_alloc         12969  2 snd_hda_intel,snd_pcm
dell_wmi               12477  0 
sparse_keymap          12760  1 dell_wmi
parport_pc             22191  1 
processor              27431  0 
evdev                  17475  7 
parport                31650  3 ppdev,lp,parport_pc
i2c_i801               16870  0 
dcdbas                 13256  0 
wmi                    13202  1 dell_wmi
ext3                  112254  5 
jbd                    41698  1 ext3
mbcache                12930  2 ext4,ext3
dm_mod                 62468  36 
usbhid                 39946  0 
hid                    72745  1 usbhid
sg                     25769  0 
sd_mod                 35644  3 
sr_mod                 21824  0 
cdrom                  35134  1 sr_mod
crc_t10dif             12348  1 sd_mod
i915                  329754  2 
e100                   32058  0 
ahci                   25089  2 
uhci_hcd               26290  0 
libahci                22616  1 ahci
libata                151572  2 ahci,libahci
ehci_hcd               39487  0 
scsi_mod              161557  4 sg,sr_mod,sd_mod,libata
mii                    12675  2 r8169,e100
drm_kms_helper         26950  1 i915
drm                   166500  3 i915,drm_kms_helper
i2c_algo_bit           12834  1 i915
i2c_core               23766  5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video                  17553  1 i915
usbcore               127203  5 btusb,usbhid,uhci_hcd,ehci_hcd
thermal_sys            17939  2 processor,video
button                 12895  1 i915
e1000e                128034  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller 
[8086:2e10] (rev 03)
        Subsystem: Dell Device [1028:0420]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset 
Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA 
controller])
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 49
        Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at ec98 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset 
Integrated Graphics Controller [8086:2e13] (rev 03)
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network 
Connection [8086:10de] (rev 02)
        Subsystem: Dell Device [1028:0276]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 47
        Region 0: Memory at fe6e0000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at fe6d9000 (32-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at ecc0 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB 
UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at ff20 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB 
UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at ff00 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB 
UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 4: I/O ports at fc00 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 
EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:0420]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 22
        Region 0: Memory at fe6da000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD 
Audio Controller [8086:3a6e] (rev 02)
        Subsystem: Dell Device [1028:0420]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 50
        Region 0: Memory at fe6dc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI 
Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: fe500000-fe5fffff
        Prefetchable memory behind bridge: 00000000f0300000-00000000f04fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI 
Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: fe400000-fe4fffff
        Prefetchable memory behind bridge: 00000000f0100000-00000000f02fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB 
UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at ff80 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB 
UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at ff60 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB 
UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at ff40 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 
EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Dell Device [1028:0420]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
a2) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fe200000-fe3fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface 
Controller [8086:3a14] (rev 02)
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family) 
SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 48
        Region 0: I/O ports at fe00 [size=8]
        Region 1: I/O ports at fe10 [size=4]
        Region 2: I/O ports at fe20 [size=8]
        Region 3: I/O ports at fe30 [size=4]
        Region 4: I/O ports at fec0 [size=32]
        Region 5: Memory at f0000000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus 
Controller [8086:3a60] (rev 02)
        Subsystem: Dell Device [1028:0420]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at fe6db000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at ece0 [size=32]
        Kernel driver in use: i801_smbus

03:00.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet 
Pro 100 [8086:1229] (rev 08)
        Subsystem: Hewlett-Packard Company NetServer 10/100TX [103c:10cb]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fe2ff000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at dcc0 [size=64]
        Region 2: Memory at fe300000 (32-bit, non-prefetchable) [size=1M]
        Capabilities: <access denied>
        Kernel driver in use: e100


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 008 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse
Bus 003 Device 002: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard
Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of 
BCM2046 Bluetooth)
Bus 001 Device 005: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface 
Subclass)
Bus 001 Device 006: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 001 Device 007: ID 0a5c:2148 Broadcom Corp. 


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.39-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-1-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.39     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.16-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-1-amd64 recommends:
ii  firmware-linux-free           3          Binary firmware for various driver

Versions of packages linux-image-2.6.39-1-amd64 suggests:
ii  grub-pc                       1.99-6     GRand Unified Bootloader, version 
pn  linux-doc-2.6.39              <none>     (no description available)

Versions of packages linux-image-2.6.39-1-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
ii  firmware-linux                0.30       Binary firmware for various driver
ii  firmware-linux-nonfree        0.30       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
* linux-image-2.6.39-1-amd64/postinst/missing-firmware-2.6.39-1-amd64:
  linux-image-2.6.39-1-amd64/prerm/removing-running-kernel-2.6.39-1-amd64: true
  linux-image-2.6.39-1-amd64/postinst/ignoring-ramdisk:
  linux-image-2.6.39-1-amd64/postinst/depmod-error-initrd-2.6.39-1-amd64: false



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to