Package: linux-2.6 Version: 3.0.0-1 Severity: normal *** Please type your report below this line ***
I have 2 lemote mini-pcs, and for both I have separate partitions for boot and root. boot needs to be ext3, given that's what pmon boot loader supports. However root can be whatever filesystem linux supports. Now problem is the lonngson-2f kernel comes without initrd, and the one generated by initramfs-tools doesn't work. So whatever FS is used needs to be built inside the kernel itself and not compiled as a module. ext3 is built inside the kernel, however ext4 is not: % 'grep' -i ext3 /boot/config-3.0.0-1-loongson-2f CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y % 'grep' -i ext4 /boot/config-3.0.0-1-loongson-2f CONFIG_EXT4_FS=m CONFIG_EXT4_FS_XATTR=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set I've used ext4 as the FS for root en several systems, including x86-64 and x86-32. Moreover I also tried using archloong (arch linux side attempt for loongson), which had ext4 built inside the kernel, and I had no problems whatsoever with it. So current configuration inhibits ext4 FS to be used as the root one, and I really see no reason not to have it built in. Please reconsider having ext4 built inside the kernel at least for loongson-2f one. Thanks, Javier. -- Package-specific info: ** Version: Linux version 3.0.0-1-loongson-2f (Debian 3.0.0-1) (b...@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-3) ) #1 Mon Jul 25 21:17:28 UTC 2011 ** Command line: console=tty machtype=lemote-fuloong-2f-box root=/dev/sda6 video=sisfb:1280x1024-24@60 resume=/dev/sda5 PMON_VER=LM6004-1.3.6 EC_VER=undefined machtype=lemote-fuloong-2f-box ** Not tainted ** Kernel log: [ 2.100000] PM: Hibernation image partition 8:5 present [ 2.100000] PM: Looking for hibernation image. [ 2.104000] PM: Image not found (code -22) [ 2.104000] PM: Hibernation image not present or could not be loaded. [ 2.104000] registered taskstats version 1 [ 2.104000] /build/buildd-linux-2.6_3.0.0-1-mipsel-TFQf1R/linux-2.6-3.0.0/debian/build/source_mipsel_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.108000] Initializing network drop monitor service [ 2.132000] EXT3-fs: barriers not enabled [ 2.140000] kjournald starting. Commit interval 5 seconds [ 2.140000] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 2.140000] VFS: Mounted root (ext3 filesystem) readonly on device 8:6. [ 2.144000] Freeing unused kernel memory: 240k freed [ 4.292000] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.300000] r8169 0000:00:06.0: (unregistered net_device): no PCI Express capability [ 4.308000] r8169 0000:00:06.0: eth0: RTL8169sc/8110sc at 0x9000000050072000, 00:23:9e:00:0f:62, XID 18000000 IRQ 36 [ 4.492000] cpufreq: Loongson-2F CPU frequency driver. [ 4.508000] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 4.528000] rtc0: alarms up to one day, 114 bytes nvram [ 4.584000] usbcore: registered new interface driver usbfs [ 4.676000] usbcore: registered new interface driver hub [ 4.720000] usbcore: registered new device driver usb [ 4.744000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.824000] PCI: Setting latency timer of device 0000:00:0e.5 to 64 [ 4.824000] ehci_hcd 0000:00:0e.5: EHCI Host Controller [ 4.828000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.852000] ehci_hcd 0000:00:0e.5: new USB bus registered, assigned bus number 1 [ 4.900000] ehci_hcd 0000:00:0e.5: irq 11, io mem 0x50071000 [ 4.920000] ehci_hcd 0000:00:0e.5: USB 0.0 started, EHCI 1.00 [ 4.932000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.936000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.940000] usb usb1: Product: EHCI Host Controller [ 4.944000] usb usb1: Manufacturer: Linux 3.0.0-1-loongson-2f ehci_hcd [ 4.948000] usb usb1: SerialNumber: 0000:00:0e.5 [ 4.960000] hub 1-0:1.0: USB hub found [ 4.976000] hub 1-0:1.0: 4 ports detected [ 4.988000] PCI: Enabling device 0000:00:0e.4 (0000 -> 0002) [ 5.004000] PCI: Setting latency timer of device 0000:00:0e.4 to 64 [ 5.004000] ohci_hcd 0000:00:0e.4: OHCI Host Controller [ 5.020000] ohci_hcd 0000:00:0e.4: new USB bus registered, assigned bus number 2 [ 5.028000] ohci_hcd 0000:00:0e.4: irq 11, io mem 0x50070000 [ 5.120000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.124000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.128000] usb usb2: Product: OHCI Host Controller [ 5.132000] usb usb2: Manufacturer: Linux 3.0.0-1-loongson-2f ohci_hcd [ 5.136000] usb usb2: SerialNumber: 0000:00:0e.4 [ 5.144000] hub 2-0:1.0: USB hub found [ 5.148000] hub 2-0:1.0: 4 ports detected [ 5.400000] PCI: Setting latency timer of device 0000:00:0e.3 to 64 [ 5.532000] usb 2-3: new low speed USB device number 2 using ohci_hcd [ 5.760000] usb 2-3: New USB device found, idVendor=04d9, idProduct=1702 [ 5.764000] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.768000] usb 2-3: Product: USB Keyboard [ 5.772000] usb 2-3: Manufacturer: [ 5.968000] usb 2-4: new low speed USB device number 3 using ohci_hcd [ 6.000000] input: USB Keyboard as /devices/pci0000:00/0000:00:0e.4/usb2/2-3/2-3:1.0/input/input0 [ 6.012000] generic-usb 0003:04D9:1702.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0e.4-3/input0 [ 6.048000] input: USB Keyboard as /devices/pci0000:00/0000:00:0e.4/usb2/2-3/2-3:1.1/input/input1 [ 6.060000] generic-usb 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:0e.4-3/input1 [ 6.076000] usbcore: registered new interface driver usbhid [ 6.080000] usbhid: USB HID core driver [ 6.156000] usb 2-4: New USB device found, idVendor=0458, idProduct=003a [ 6.160000] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.164000] usb 2-4: Product: Optical Mouse [ 6.168000] usb 2-4: Manufacturer: Genius [ 6.196000] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:0e.4/usb2/2-4/2-4:1.0/input/input2 [ 6.216000] generic-usb 0003:0458:003A.0003: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:0e.4-4/input0 [ 9.832000] Adding 3903744k swap on /dev/sda5. Priority:-1 extents:1 across:3903744k [ 10.932000] EXT3-fs (sda6): using internal journal [ 11.368000] loop: module loaded [ 11.492000] fuse init (API version 7.16) [ 18.460000] EXT3-fs: barriers not enabled [ 18.472000] kjournald starting. Commit interval 5 seconds [ 18.476000] EXT3-fs (sda1): using internal journal [ 18.480000] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 18.696000] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 18.860000] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 18.992000] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) [ 19.096000] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null) [ 19.176000] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null) [ 19.276000] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null) [ 19.404000] EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: (null) [ 19.660000] EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: (null) [ 20.608000] r8169 0000:00:06.0: eth0: link down [ 21.452000] NET: Registered protocol family 10 [ 21.460000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.036000] r8169 0000:00:06.0: eth0: link up [ 22.044000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.308000] RPC: Registered named UNIX socket transport module. [ 22.312000] RPC: Registered udp transport module. [ 22.316000] RPC: Registered tcp transport module. [ 22.320000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 22.364000] FS-Cache: Loaded [ 22.452000] FS-Cache: Netfs 'nfs' registered for caching [ 22.500000] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 28.940000] ioctl32(Xorg:1305): Unknown cmd fd(8) cmd(8004f300){t:'�';sz:4} arg(7fd428b4) on /dev/fb0 [ 28.940000] ioctl32(Xorg:1305): Unknown cmd fd(8) cmd(80046ef8){t:'n';sz:4} arg(00989e60) on /dev/fb0 [ 28.940000] sisfb 0000:00:08.0: Invalid ROM contents [ 32.448000] eth0: no IPv6 routers present [ 38.064000] sisfb 0000:00:08.0: Invalid ROM contents [ 38.064000] sisfb 0000:00:08.0: Invalid ROM contents ** Model information system type : lemote-fuloong-2f-box cpu model : ICT Loongson-2 V0.3 FPU V0.1 ** Loaded modules: Module Size Used by cpufreq_stats 3130 0 cpufreq_conservative 6257 0 cpufreq_userspace 2128 0 cpufreq_powersave 1094 0 nfsd 359805 2 nfs 383137 0 lockd 92252 2 nfsd,nfs fscache 41569 1 nfs auth_rpcgss 48166 2 nfsd,nfs nfs_acl 2959 2 nfsd,nfs sunrpc 234434 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl ipv6 378237 26 ext4 424010 8 jbd2 76710 1 ext4 crc16 1447 1 ext4 autofs4 27460 3 fuse 80422 1 loop 18465 0 evdev 11734 5 usbhid 44648 0 hid 93455 1 usbhid snd_cs5535audio 11665 0 snd_ac97_codec 134508 1 snd_cs5535audio ac97_bus 1294 1 snd_ac97_codec snd_pcm 87605 2 snd_cs5535audio,snd_ac97_codec snd_seq 62903 0 snd_timer 22681 2 snd_pcm,snd_seq snd_seq_device 7017 1 snd_seq snd 72623 6 snd_cs5535audio,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device ohci_hcd 24339 0 ehci_hcd 46296 0 soundcore 6089 1 snd snd_page_alloc 6989 2 snd_cs5535audio,snd_pcm usbcore 176676 4 usbhid,ohci_hcd,ehci_hcd rtc_cmos 7696 0 loongson2_cpufreq 2827 0 loongson2_clock 2536 1 loongson2_cpufreq r8169 49164 0 mii 4787 1 r8169 ** PCI devices: 00:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 36 Region 0: I/O ports at 4000 [size=256] Region 1: Memory at 50072000 (32-bit, non-prefetchable) [size=256] Expansion ROM at 50040000 [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 00:08.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter [1039:0325] (prog-if 00 [VGA controller]) Subsystem: Device [3030:3030] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 71 (750ns min, 4000ns max) Interrupt: pin A routed to IRQ 38 BIST result: 00 Region 0: Memory at 40000000 (32-bit, prefetchable) [size=256M] Region 1: Memory at 50000000 (32-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 4800 [size=128] Expansion ROM at 50060000 [size=64K] Capabilities: <access denied> Kernel driver in use: sisfb 00:0e.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] ISA [1022:2090] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at 4cf0 [size=8] Region 1: I/O ports at 4400 [size=256] Region 2: I/O ports at 4c80 [size=64] Region 4: I/O ports at 4880 [size=128] Region 5: I/O ports at 4cc0 [size=32] 00:0e.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] IDE [1022:209a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 14 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at 4ce0 [size=16] Kernel driver in use: pata_amd 00:0e.3 Multimedia audio controller [0401]: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio [1022:2093] (rev 01) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio [1022:2093] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 4c00 [size=128] Kernel driver in use: cs5535audio 00:0e.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC [1022:2094] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at 50070000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:0e.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC [1022:2095] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at 50071000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ehci_hcd ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. Bus 002 Device 003: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler / Genius NetScroll 120 -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: mipsel (mips64) Kernel: Linux 3.0.0-1-loongson-2f Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-1-loongson-2f depends on: ii debconf [debconf-2.0] 1.5.41 Debian configuration management sy ii linux-base 3.3 Linux image base package ii module-init-tools 3.16-1 tools for managing Linux kernel mo Versions of packages linux-image-3.0.0-1-loongson-2f recommends: ii firmware-linux-free 3 Binary firmware for various driver Versions of packages linux-image-3.0.0-1-loongson-2f suggests: pn linux-doc-3.0.0 <none> (no description available) Versions of packages linux-image-3.0.0-1-loongson-2f is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.33 Binary firmware for various driver ii firmware-linux-nonfree 0.33 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information excluded -- Javier. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org