Package: x11-xserver-utils
Version: 7.6+3
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropiate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
Using netbook with small screen (1024 x 600), I use a virtual
screen of 1024x1024.
That has worked until the recent xorg packages updates on testing.
The script I have been using is:
-------------------------------
#!/bin/bash
# set decent vertical height, and fix dpi while we are at it
virtual_size=1024x1024
xrandr --fb $virtual_size --output LVDS1 --mode 1024x600 --panning $virtual_size
xrandr --dpi 133*134
-------------------------------------
That is
xrandr --fb 1024x1024 --output LVDS1 --mode 1024x600 --panning 1024x1024
no longer works.
After issuing the above,
$ xrandx --verbose gives:
Screen 0: minimum 320 x 200, current 1024 x 1024, maximum 4096 x 4096
LVDS1 connected 1024x1024+0+0 (0x43) normal (normal left inverted right x axis
y axis) 195mm x 113mm panning 1024x1024+0+0
Identifier: 0x41
Timestamp: 6943587
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 1
Panning: 1024x1024+0+0
Tracking: 0x0+0+0
Border: 0/0/0/0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0006afc21100000000
0112010380140b780afa569256549824
1a4f5400000001010101010101010101
010101010101b0130040415819201888
3100c371000000180000000f00000000
00000000000000000020000000fe0041
554f0a202020202020202020000000fe
004230383941573031205631200a0058
scaling mode: Full aspect
supported: None Full Center Full aspect
1024x600 (0x43) 50.4MHz -HSync -VSync *current +preferred
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 37.5KHz
v: height 600 start 603 end 604 total 625 clock 60.0Hz
800x600 (0x44) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x45) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x46) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
VGA1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x42
Timestamp: 6943587
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
-----------------------------------------------------------------
although plain $xrandr is probably enough to notice the mode oddity:
Screen 0: minimum 320 x 200, current 1024 x 1024, maximum 4096 x 4096
LVDS1 connected 1024x1024+0+0 (normal left inverted right x axis y axis) 195mm
x 113mm panning 1024x1024+0+0
1024x600 60.0*+
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
-----------------------------------------------------------------
The xorg packages just upgraded are:
2011-09-28 10:32:31 upgrade xserver-common 2:1.10.4-1 2:1.11.1-1
2011-09-28 10:32:32 upgrade xserver-xorg-video-intel 2:2.15.0-3 2:2.16.0-1
2011-09-28 10:32:32 upgrade xserver-xorg-input-evdev 1:2.6.0-2+b1 1:2.6.0-2+b2
2011-09-28 10:32:32 upgrade xserver-xorg-core 2:1.10.4-1 2:1.11.1-1
2011-09-28 10:32:33 upgrade xserver-xorg-input-synaptics 1.4.1-1 1.4.1-1+b1
I have experimented with xrandr, checked the XSF and xorg pages and
more. I tried adding a Virtual declaration to xorg.conf. All to no
avail.
It is possible that my xrandr command line is astray since the
documentation isn't very clear, but it used to work...
---------------------------------------------------------------
Here is /var/log/Xorg.0.log:
[ 4803.738]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 4803.747] X Protocol Version 11, Revision 0
[ 4803.751] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 4803.754] Current Operating System: Linux elf 3.0.0-1-686-pae #1 SMP Sat Aug
27 16:41:03 UTC 2011 i686
[ 4803.757] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae
root=UUID=b0e0725b-0ebb-4a27-964d-75eb6e73e069 ro elevator=noop
enable_mtrr_cleanup
[ 4803.764] Build Date: 24 September 2011 10:02:42AM
[ 4803.767] xorg-server 2:1.11.1-1 (Cyril Brulebois <k...@debian.org>)
[ 4803.770] Current version of pixman: 0.22.2
[ 4803.773] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4803.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4803.789] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 28 18:05:10
2011
[ 4803.793] (==) Using config file: "/etc/X11/xorg.conf"
[ 4803.796] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4803.800] (==) No Layout section. Using the first Screen section.
[ 4803.800] (**) |-->Screen "945GME" (0)
[ 4803.800] (**) | |-->Monitor "<default monitor>"
[ 4803.800] (==) No monitor specified for screen "945GME".
Using a default monitor configuration.
[ 4803.800] (==) Automatically adding devices
[ 4803.800] (==) Automatically enabling devices
[ 4803.801] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4803.801] Entry deleted from font path.
[ 4803.801] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 4803.801] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4803.801] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 4803.801] (II) Loader magic: 0x822b800
[ 4803.801] (II) Module ABI versions:
[ 4803.801] X.Org ANSI C Emulation: 0.4
[ 4803.801] X.Org Video Driver: 11.0
[ 4803.801] X.Org XInput driver : 13.0
[ 4803.801] X.Org Server Extension : 6.0
[ 4803.804] (--) PCI:*(0:0:2:0) 8086:27ae:1025:015b rev 3, Mem @
0x78480000/524288, 0x60000000/268435456, 0x78500000/262144, I/O @ 0x000060c0/8
[ 4803.804] (--) PCI: (0:0:2:1) 8086:27a6:1025:015b rev 3, Mem @
0x78400000/524288
[ 4803.804] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4803.804] (II) LoadModule: "extmod"
[ 4803.805] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4803.806] (II) Module extmod: vendor="X.Org Foundation"
[ 4803.806] compiled for 1.11.1, module version = 1.0.0
[ 4803.806] Module class: X.Org Server Extension
[ 4803.806] ABI class: X.Org Server Extension, version 6.0
[ 4803.806] (II) Loading extension SELinux
[ 4803.806] (II) Loading extension MIT-SCREEN-SAVER
[ 4803.806] (II) Loading extension XFree86-VidModeExtension
[ 4803.806] (II) Loading extension XFree86-DGA
[ 4803.806] (II) Loading extension DPMS
[ 4803.806] (II) Loading extension XVideo
[ 4803.806] (II) Loading extension XVideo-MotionCompensation
[ 4803.806] (II) Loading extension X-Resource
[ 4803.806] (II) LoadModule: "dbe"
[ 4803.807] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4803.807] (II) Module dbe: vendor="X.Org Foundation"
[ 4803.807] compiled for 1.11.1, module version = 1.0.0
[ 4803.807] Module class: X.Org Server Extension
[ 4803.807] ABI class: X.Org Server Extension, version 6.0
[ 4803.807] (II) Loading extension DOUBLE-BUFFER
[ 4803.807] (II) LoadModule: "glx"
[ 4803.807] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4803.808] (II) Module glx: vendor="X.Org Foundation"
[ 4803.808] compiled for 1.11.1, module version = 1.0.0
[ 4803.808] ABI class: X.Org Server Extension, version 6.0
[ 4803.808] (==) AIGLX enabled
[ 4803.808] (II) Loading extension GLX
[ 4803.808] (II) LoadModule: "record"
[ 4803.808] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4803.809] (II) Module record: vendor="X.Org Foundation"
[ 4803.809] compiled for 1.11.1, module version = 1.13.0
[ 4803.809] Module class: X.Org Server Extension
[ 4803.809] ABI class: X.Org Server Extension, version 6.0
[ 4803.809] (II) Loading extension RECORD
[ 4803.809] (II) LoadModule: "dri"
[ 4803.809] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4803.809] (II) Module dri: vendor="X.Org Foundation"
[ 4803.809] compiled for 1.11.1, module version = 1.0.0
[ 4803.810] ABI class: X.Org Server Extension, version 6.0
[ 4803.810] (II) Loading extension XFree86-DRI
[ 4803.810] (II) LoadModule: "dri2"
[ 4803.810] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4803.810] (II) Module dri2: vendor="X.Org Foundation"
[ 4803.810] compiled for 1.11.1, module version = 1.2.0
[ 4803.810] ABI class: X.Org Server Extension, version 6.0
[ 4803.810] (II) Loading extension DRI2
[ 4803.810] (==) Matched intel as autoconfigured driver 0
[ 4803.810] (==) Matched vesa as autoconfigured driver 1
[ 4803.810] (==) Matched fbdev as autoconfigured driver 2
[ 4803.811] (==) Assigned the driver to the xf86ConfigLayout
[ 4803.811] (II) LoadModule: "intel"
[ 4803.811] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4803.811] (II) Module intel: vendor="X.Org Foundation"
[ 4803.811] compiled for 1.11.0, module version = 2.16.0
[ 4803.811] Module class: X.Org Video Driver
[ 4803.811] ABI class: X.Org Video Driver, version 11.0
[ 4803.811] (II) LoadModule: "vesa"
[ 4803.812] (WW) Warning, couldn't open module vesa
[ 4803.812] (II) UnloadModule: "vesa"
[ 4803.812] (II) Unloading vesa
[ 4803.812] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4803.816] (II) LoadModule: "fbdev"
[ 4803.816] (WW) Warning, couldn't open module fbdev
[ 4803.816] (II) UnloadModule: "fbdev"
[ 4803.816] (II) Unloading fbdev
[ 4803.817] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4803.820] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 4803.821] (--) using VT number 7
[ 4803.835] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4803.836] drmOpenDevice: node name is /dev/dri/card0
[ 4803.836] drmOpenDevice: open result is 9, (OK)
[ 4803.836] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 4803.837] drmOpenDevice: node name is /dev/dri/card0
[ 4803.837] drmOpenDevice: open result is 9, (OK)
[ 4803.837] drmOpenByBusid: drmOpenMinor returns 9
[ 4803.837] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 4803.837] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4803.837] (==) intel(0): RGB weight 888
[ 4803.837] (==) intel(0): Default visual is TrueColor
[ 4803.837] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 4803.837] (--) intel(0): Chipset: "945GME"
[ 4803.837] (**) intel(0): Relaxed fencing disabled
[ 4803.837] (**) intel(0): Wait on SwapBuffers? enabled
[ 4803.838] (**) intel(0): Triple buffering? enabled
[ 4803.838] (**) intel(0): Framebuffer tiled
[ 4803.838] (**) intel(0): Pixmaps tiled
[ 4803.838] (**) intel(0): 3D buffers tiled
[ 4803.838] (**) intel(0): SwapBuffers wait enabled
[ 4803.838] (==) intel(0): video overlay key set to 0x101fe
[ 4803.838] (II) intel(0): Output LVDS1 has no monitor section
[ 4803.868] (II) intel(0): Output VGA1 has no monitor section
[ 4803.868] (II) intel(0): EDID for output LVDS1
[ 4803.868] (II) intel(0): Manufacturer: AUO Model: 11c2 Serial#: 0
[ 4803.868] (II) intel(0): Year: 2008 Week: 1
[ 4803.869] (II) intel(0): EDID Version: 1.3
[ 4803.869] (II) intel(0): Digital Display Input
[ 4803.869] (II) intel(0): Max Image Size [cm]: horiz.: 20 vert.: 11
[ 4803.869] (II) intel(0): Gamma: 2.20
[ 4803.869] (II) intel(0): No DPMS capabilities specified
[ 4803.869] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 4803.869] (II) intel(0): First detailed timing is preferred mode
[ 4803.869] (II) intel(0): redX: 0.573 redY: 0.339 greenX: 0.330 greenY:
0.596
[ 4803.869] (II) intel(0): blueX: 0.142 blueY: 0.103 whiteX: 0.310 whiteY:
0.330
[ 4803.869] (II) intel(0): Manufacturer's mask: 0
[ 4803.870] (II) intel(0): Supported detailed timing:
[ 4803.870] (II) intel(0): clock: 50.4 MHz Image Size: 195 x 113 mm
[ 4803.870] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184
h_blank_end 1344 h_border: 0
[ 4803.870] (II) intel(0): v_active: 600 v_sync: 603 v_sync_end 604
v_blanking: 625 v_border: 0
[ 4803.870] (II) intel(0): Unknown vendor-specific block f
[ 4803.870] (II) intel(0): AUO
[ 4803.870] (II) intel(0): B089AW01 V1
[ 4803.870] (II) intel(0): EDID (in hex):
[ 4803.870] (II) intel(0): 00ffffffffffff0006afc21100000000
[ 4803.870] (II) intel(0): 0112010380140b780afa569256549824
[ 4803.870] (II) intel(0): 1a4f5400000001010101010101010101
[ 4803.871] (II) intel(0): 010101010101b0130040415819201888
[ 4803.871] (II) intel(0): 3100c371000000180000000f00000000
[ 4803.871] (II) intel(0): 00000000000000000020000000fe0041
[ 4803.871] (II) intel(0): 554f0a202020202020202020000000fe
[ 4803.871] (II) intel(0): 004230383941573031205631200a0058
[ 4803.871] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4803.871] (II) intel(0): Printing DDC gathered Modelines:
[ 4803.871] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4803.872] (II) intel(0): Not using default mode "320x240" (doublescan mode
not supported)
[ 4803.872] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "400x300" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "512x384" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "640x480" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "640x512" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "800x600" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "576x432" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "680x384" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "680x384" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "700x525" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "720x450" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "800x512" (doublescan mode
not supported)
[ 4803.873] (II) intel(0): Not using default mode "840x525" (doublescan mode
not supported)
[ 4803.874] (II) intel(0): Not using default mode "840x525" (doublescan mode
not supported)
[ 4803.874] (II) intel(0): Not using default mode "960x540" (doublescan mode
not supported)
[ 4803.874] (II) intel(0): Not using default mode "960x600" (doublescan mode
not supported)
[ 4803.874] (II) intel(0): Printing probed modes for output LVDS1
[ 4803.874] (II) intel(0): Modeline "1024x600"x60.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4803.874] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz)
[ 4803.874] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz)
[ 4803.874] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz)
[ 4803.904] (II) intel(0): EDID for output VGA1
[ 4803.904] (II) intel(0): Output LVDS1 connected
[ 4803.904] (II) intel(0): Output VGA1 disconnected
[ 4803.904] (II) intel(0): Using exact sizes for initial modes
[ 4803.904] (II) intel(0): Output LVDS1 using initial mode 1024x600
[ 4803.904] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
otherwise stated.
[ 4803.904] (II) intel(0): Kernel page flipping support detected, enabling
[ 4803.904] (**) intel(0): Display dimensions: (200, 110) mm
[ 4803.905] (**) intel(0): DPI set to (130, 236)
[ 4803.905] (II) Loading sub module "fb"
[ 4803.905] (II) LoadModule: "fb"
[ 4803.905] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4803.906] (II) Module fb: vendor="X.Org Foundation"
[ 4803.906] compiled for 1.11.1, module version = 1.0.0
[ 4803.906] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4803.907] (II) Loading sub module "dri2"
[ 4803.907] (II) LoadModule: "dri2"
[ 4803.907] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4803.907] (II) Module dri2: vendor="X.Org Foundation"
[ 4803.908] compiled for 1.11.1, module version = 1.2.0
[ 4803.908] ABI class: X.Org Server Extension, version 6.0
[ 4803.908] (==) Depth 24 pixmap format is 32 bpp
[ 4803.908] (II) intel(0): [DRI2] Setup complete
[ 4803.908] (II) intel(0): [DRI2] DRI driver: i915
[ 4803.908] (II) intel(0): Allocated new frame buffer 1024x1024 stride 4096,
tiled
[ 4803.909] (II) UXA(0): Driver registered support for the following
operations:
[ 4803.909] (II) solid
[ 4803.909] (II) copy
[ 4803.909] (II) composite (RENDER acceleration)
[ 4803.909] (II) put_image
[ 4803.909] (II) get_image
[ 4803.909] (==) intel(0): Backing store disabled
[ 4803.909] (==) intel(0): Silken mouse enabled
[ 4803.910] (II) intel(0): Initializing HW Cursor
[ 4803.928] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 4803.929] (==) intel(0): DPMS enabled
[ 4803.929] (==) intel(0): Intel XvMC decoder disabled
[ 4803.929] (II) intel(0): Set up textured video
[ 4803.929] (II) intel(0): Set up overlay video
[ 4803.929] (II) intel(0): direct rendering: DRI2 Enabled
[ 4803.929] (==) intel(0): hotplug detection: "enabled"
[ 4803.929] (--) RandR disabled
[ 4803.930] (II) Initializing built-in extension Generic Event Extension
[ 4803.930] (II) Initializing built-in extension SHAPE
[ 4803.930] (II) Initializing built-in extension MIT-SHM
[ 4803.930] (II) Initializing built-in extension XInputExtension
[ 4803.930] (II) Initializing built-in extension XTEST
[ 4803.930] (II) Initializing built-in extension BIG-REQUESTS
[ 4803.930] (II) Initializing built-in extension SYNC
[ 4803.930] (II) Initializing built-in extension XKEYBOARD
[ 4803.930] (II) Initializing built-in extension XC-MISC
[ 4803.930] (II) Initializing built-in extension SECURITY
[ 4803.930] (II) Initializing built-in extension XINERAMA
[ 4803.930] (II) Initializing built-in extension XFIXES
[ 4803.930] (II) Initializing built-in extension RENDER
[ 4803.930] (II) Initializing built-in extension RANDR
[ 4803.930] (II) Initializing built-in extension COMPOSITE
[ 4803.930] (II) Initializing built-in extension DAMAGE
[ 4803.931] (II) SELinux: Disabled on system
[ 4803.966] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4803.966] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4803.966] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4803.966] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 4803.966] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4803.967] (II) AIGLX: Loaded and initialized i915
[ 4803.967] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4803.968] (II) intel(0): Setting screen physical size to 270 x 158
[ 4803.969] (II) intel(0): Allocated new frame buffer 1024x600 stride 4096,
tiled
[ 4804.131] (II) config/udev: Adding input device Power Button
(/dev/input/event4)
[ 4804.131] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4804.131] (II) LoadModule: "evdev"
[ 4804.132] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4804.132] (II) Module evdev: vendor="X.Org Foundation"
[ 4804.132] compiled for 1.11.0, module version = 2.6.0
[ 4804.132] Module class: X.Org XInput Driver
[ 4804.132] ABI class: X.Org XInput driver, version 13.0
[ 4804.132] (II) Using input driver 'evdev' for 'Power Button'
[ 4804.132] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4804.133] (**) Power Button: always reports core events
[ 4804.133] (**) Power Button: Device: "/dev/input/event4"
[ 4804.133] (--) Power Button: Found keys
[ 4804.133] (II) Power Button: Configuring as keyboard
[ 4804.133] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 4804.133] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 6)
[ 4804.133] (**) Option "xkb_rules" "evdev"
[ 4804.133] (**) Option "xkb_model" "pc105"
[ 4804.133] (**) Option "xkb_layout" "gb"
[ 4804.193] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 4804.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4804.193] (II) Using input driver 'evdev' for 'Video Bus'
[ 4804.193] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4804.194] (**) Video Bus: always reports core events
[ 4804.194] (**) Video Bus: Device: "/dev/input/event5"
[ 4804.194] (--) Video Bus: Found keys
[ 4804.194] (II) Video Bus: Configuring as keyboard
[ 4804.194] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[ 4804.194] (II) XINPUT: Adding extended input device "Video Bus" (type:
KEYBOARD, id 7)
[ 4804.194] (**) Option "xkb_rules" "evdev"
[ 4804.194] (**) Option "xkb_model" "pc105"
[ 4804.194] (**) Option "xkb_layout" "gb"
[ 4804.195] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 4804.196] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4804.196] (II) Using input driver 'evdev' for 'Power Button'
[ 4804.196] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4804.196] (**) Power Button: always reports core events
[ 4804.196] (**) Power Button: Device: "/dev/input/event1"
[ 4804.196] (--) Power Button: Found keys
[ 4804.196] (II) Power Button: Configuring as keyboard
[ 4804.196] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 4804.196] (II) XINPUT: Adding extended input device "Power Button" (type:
KEYBOARD, id 8)
[ 4804.196] (**) Option "xkb_rules" "evdev"
[ 4804.196] (**) Option "xkb_model" "pc105"
[ 4804.196] (**) Option "xkb_layout" "gb"
[ 4804.198] (II) config/udev: Adding input device Lid Switch
(/dev/input/event2)
[ 4804.198] (II) No input driver/identifier specified (ignoring)
[ 4804.199] (II) config/udev: Adding input device Sleep Button
(/dev/input/event3)
[ 4804.199] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4804.199] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4804.199] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4804.199] (**) Sleep Button: always reports core events
[ 4804.199] (**) Sleep Button: Device: "/dev/input/event3"
[ 4804.199] (--) Sleep Button: Found keys
[ 4804.199] (II) Sleep Button: Configuring as keyboard
[ 4804.199] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 4804.199] (II) XINPUT: Adding extended input device "Sleep Button" (type:
KEYBOARD, id 9)
[ 4804.199] (**) Option "xkb_rules" "evdev"
[ 4804.200] (**) Option "xkb_model" "pc105"
[ 4804.200] (**) Option "xkb_layout" "gb"
[ 4804.203] (II) config/udev: Adding input device HDA Digital PCBeep
(/dev/input/event8)
[ 4804.203] (II) No input driver/identifier specified (ignoring)
[ 4804.204] (II) config/udev: Adding input device HDA Intel Headphone
(/dev/input/event10)
[ 4804.204] (II) No input driver/identifier specified (ignoring)
[ 4804.205] (II) config/udev: Adding input device HDA Intel Mic
(/dev/input/event9)
[ 4804.205] (II) No input driver/identifier specified (ignoring)
[ 4804.207] (II) config/udev: Adding input device Acer Crystal Eye webcam
(/dev/input/event7)
[ 4804.207] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard
catchall"
[ 4804.207] (II) Using input driver 'evdev' for 'Acer Crystal Eye webcam'
[ 4804.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4804.207] (**) Acer Crystal Eye webcam: always reports core events
[ 4804.207] (**) Acer Crystal Eye webcam: Device: "/dev/input/event7"
[ 4804.207] (--) Acer Crystal Eye webcam: Found keys
[ 4804.207] (II) Acer Crystal Eye webcam: Configuring as keyboard
[ 4804.207] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7/event7"
[ 4804.207] (II) XINPUT: Adding extended input device "Acer Crystal Eye
webcam" (type: KEYBOARD, id 10)
[ 4804.207] (**) Option "xkb_rules" "evdev"
[ 4804.207] (**) Option "xkb_model" "pc105"
[ 4804.207] (**) Option "xkb_layout" "gb"
[ 4804.209] (II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
[ 4804.209] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev
keyboard catchall"
[ 4804.209] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4804.209] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4804.209] (**) AT Translated Set 2 keyboard: always reports core events
[ 4804.209] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4804.209] (--) AT Translated Set 2 keyboard: Found keys
[ 4804.209] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 4804.210] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4804.210] (II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD, id 11)
[ 4804.210] (**) Option "xkb_rules" "evdev"
[ 4804.210] (**) Option "xkb_model" "pc105"
[ 4804.210] (**) Option "xkb_layout" "gb"
[ 4804.211] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/event11)
[ 4804.211] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev
touchpad catchall"
[ 4804.211] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[ 4804.212] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Synaptics
TouchPad"
[ 4804.212] (II) LoadModule: "synaptics"
[ 4804.212] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4804.212] (II) Module synaptics: vendor="X.Org Foundation"
[ 4804.213] compiled for 1.11.0, module version = 1.4.1
[ 4804.213] Module class: X.Org XInput Driver
[ 4804.213] ABI class: X.Org XInput driver, version 13.0
[ 4804.213] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[ 4804.213] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4804.213] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4804.213] (**) Option "Device" "/dev/input/event11"
[ 4804.236] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 4804.236] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5218
[ 4804.236] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 4804.236] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 4804.236] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 4804.236] (**) Option "LeftEdge" "1700"
[ 4804.236] (**) Option "BottomEdge" "5100"
[ 4804.237] (**) Option "FingerLow" "25"
[ 4804.237] (**) Option "FingerHigh" "30"
[ 4804.237] (**) Option "MaxTapTime" "180"
[ 4804.237] (**) Option "MaxDoubleTapTime" "140"
[ 4804.237] (**) Option "VertScrollDelta" "100"
[ 4804.237] (**) Option "VertEdgeScroll" "true"
[ 4804.237] (**) Option "HorizEdgeScroll" "true"
[ 4804.238] (**) Option "VertTwoFingerScroll" "true"
[ 4804.238] (**) Option "HorizTwoFingerScroll" "true"
[ 4804.238] (**) Option "RTCornerButton" "2"
[ 4804.238] (**) Option "TapButton1" "1"
[ 4804.238] (**) Option "TapButton2" "2"
[ 4804.239] (**) Option "MinSpeed" "0.5"
[ 4804.239] (**) Option "MaxSpeed" "20"
[ 4804.239] (**) Option "AccelFactor" "0.02"
[ 4804.239] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 4804.239] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4804.240] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio2/input/input11/event11"
[ 4804.240] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics
TouchPad" (type: TOUCHPAD, id 12)
[ 4804.240] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant
deceleration 2.0
[ 4804.240] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 40.00
[ 4804.240] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.020
[ 4804.241] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration
scheme 1
[ 4804.242] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 4804.242] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 4804.242] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 4804.242] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 4804.244] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad
(/dev/input/mouse0)
[ 4804.244] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad
catchall"
[ 4804.244] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics
TouchPad'
[ 4804.244] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4804.244] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4804.244] (**) Option "Device" "/dev/input/mouse0"
[ 4804.244] (--) SynPS/2 Synaptics TouchPad: invalid x-axis range. defaulting
to 1615 - 5685
[ 4804.245] (--) SynPS/2 Synaptics TouchPad: invalid y-axis range. defaulting
to 1729 - 4171
[ 4804.245] (--) SynPS/2 Synaptics TouchPad: invalid pressure range.
defaulting to 0 - 256
[ 4804.245] (--) SynPS/2 Synaptics TouchPad: invalid finger width range.
defaulting to 0 - 16
[ 4804.265] (EE) Query no Synaptics: 6003C8
[ 4804.266] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 4804.266] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize
Synaptics hardware.
[ 4804.266] (EE) PreInit returned 11 for "SynPS/2 Synaptics TouchPad"
[ 4804.266] (II) UnloadModule: "synaptics"
[ 4804.266] (II) Unloading synaptics
[ 4804.268] (II) config/udev: Adding input device PC Speaker
(/dev/input/event6)
[ 4804.268] (II) No input driver/identifier specified (ignoring)
[ 4804.272] (II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event12)
[ 4804.272] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev
keyboard catchall"
[ 4804.272] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 4804.272] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4804.272] (**) ACPI Virtual Keyboard Device: always reports core events
[ 4804.272] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
[ 4804.272] (--) ACPI Virtual Keyboard Device: Found keys
[ 4804.272] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 4804.272] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input12/event12"
[ 4804.273] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard
Device" (type: KEYBOARD, id 13)
[ 4804.273] (**) Option "xkb_rules" "evdev"
[ 4804.273] (**) Option "xkb_model" "pc105"
[ 4804.273] (**) Option "xkb_layout" "gb"
[ 4804.704] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4804.704] (II) intel(0): Printing DDC gathered Modelines:
[ 4804.704] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4804.736] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4804.736] (II) intel(0): Printing DDC gathered Modelines:
[ 4804.736] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4805.579] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4805.579] (II) intel(0): Printing DDC gathered Modelines:
[ 4805.579] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4818.665] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4818.665] (II) intel(0): Printing DDC gathered Modelines:
[ 4818.665] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4818.710] (II) intel(0): Allocated new frame buffer 1024x1024 stride 4096,
tiled
[ 4818.879] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4818.879] (II) intel(0): Printing DDC gathered Modelines:
[ 4818.880] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4818.914] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4818.914] (II) intel(0): Printing DDC gathered Modelines:
[ 4818.914] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4818.944] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4818.944] (II) intel(0): Printing DDC gathered Modelines:
[ 4818.944] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4819.082] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4819.082] (II) intel(0): Printing DDC gathered Modelines:
[ 4819.082] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4819.113] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4819.113] (II) intel(0): Printing DDC gathered Modelines:
[ 4819.113] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4830.770] (II) intel(0): EDID vendor "AUO", prod id 4546
[ 4830.770] (II) intel(0): Printing DDC gathered Modelines:
[ 4830.770] (II) intel(0): Modeline "1024x600"x0.0 50.40 1024 1048 1184
1344 600 603 604 625 -hsync -vsync (37.5 kHz)
[ 4841.372] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 4898.404] (II) ACPI Virtual Keyboard Device: Close
[ 4898.405] (II) UnloadModule: "evdev"
[ 4898.405] (II) Unloading evdev
[ 4898.405] (II) UnloadModule: "synaptics"
[ 4898.405] (II) Unloading synaptics
[ 4898.405] (II) AT Translated Set 2 keyboard: Close
[ 4898.405] (II) UnloadModule: "evdev"
[ 4898.405] (II) Unloading evdev
[ 4898.405] (II) Acer Crystal Eye webcam: Close
[ 4898.405] (II) UnloadModule: "evdev"
[ 4898.405] (II) Unloading evdev
[ 4898.406] (II) Sleep Button: Close
[ 4898.406] (II) UnloadModule: "evdev"
[ 4898.406] (II) Unloading evdev
[ 4898.406] (II) Power Button: Close
[ 4898.406] (II) UnloadModule: "evdev"
[ 4898.406] (II) Unloading evdev
[ 4898.406] (II) Video Bus: Close
[ 4898.406] (II) UnloadModule: "evdev"
[ 4898.406] (II) Unloading evdev
[ 4898.406] (II) Power Button: Close
[ 4898.406] (II) UnloadModule: "evdev"
[ 4898.406] (II) Unloading evdev
[ 4898.410] Server terminated successfully (0). Closing log file.
----------------------------------------------------------------------
lsmod shows that the drm_kms_helper module is loaded.
lsmod|grep kms gives:
drm_kms_helper 22688 1 i915
drm 129847 3 i915,drm_kms_helper
i2c_core 19141 6
videodev,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
-----------------------------------------------------------------------
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.0.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages x11-xserver-utils depends on:
ii cpp 4:4.6.1-2
ii libc6 2.13-21
ii libice6 2:1.0.7-2
ii libx11-6 2:1.4.4-1
ii libxau6 1:1.0.6-3
ii libxaw7 2:1.0.9-2
ii libxcursor1 1:1.1.12-1
ii libxext6 2:1.3.0-3
ii libxi6 2:1.4.3-3
ii libxmu6 2:1.1.0-2
ii libxmuu1 2:1.1.0-2
ii libxrandr2 2:1.3.2-2
ii libxrender1 1:0.9.6-2
ii libxt6 1:1.1.1-2
ii libxxf86vm1 1:1.1.1-2
x11-xserver-utils recommends no packages.
Versions of packages x11-xserver-utils suggests:
ii cairo-5c <none>
ii nickle <none>
ii xorg-docs-core 1:1.6-1
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
