Package: libsane Version: 1.0.21-9 Severity: normal File: sane Dear Sir,
the command scanimage -L 192.167.2.115 is not working. Please find below the model of the printer: HP Officejet 4500 All-in-One Printer # nmap -sS -PN gives: Interesting ports on XXXX: Not shown: 989 closed ports PORT STATE SERVICE 80/tcp open http 6839/tcp open unknown 7435/tcp open unknown 8080/tcp open http-proxy 9100/tcp open jetdirect 9101/tcp open jetdirect 9102/tcp open jetdirect 9110/tcp open unknown 9220/tcp open unknown 9290/tcp open unknown 9500/tcp open unknown MAC Address: XXXX (Unknown) XX Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 55055/tcp open unknown MAC Address: XXXXX (Unknown) Nmap done: 30 IP addresses (25 hosts up) scanned in 22.95 seconds The HP is device an hpaio: Officejet_4500_G510g-m?serial=XXXX' is a Hewlett-Packard Officejet_4500_G510g-m all-in-one when I do scanimage -L # /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader # # Backends can also be enabled by configuration snippets under # /etc/sane.d/dll.d directory -- packages providing backends should drop # a config file similar to dll.conf in this directory, named after the package. # # The next line enables the network backend; comment it out if you don't need # to use a remote SANE scanner over the network - see sane-net(5) and saned(8) net abaton agfafocus apple avision artec artec_eplus48u as6e bh canon canon630u canon_dr #canon_pp apt-get hplip libsane-hpaio has been done successfully # apt-get install hplip libsane-hpaio Reading package lists... Done Building dependency tree Reading state information... Done hplip is already the newest version. libsane-hpaio is already the newest version. libsane-hpaio set to manually installed. 0 upgraded, 0 newly installed, 0 to remove and 22 not upgraded. # ls /etc/sane.d/ abaton.conf canon_dr.conf dell1600n_net.conf geniusvp2.conf ibm.conf mustek_pp.conf qcam.conf sp15c.conf umax1220u.conf agfafocus.conf canon_pp.conf dll.conf gphoto2.conf kodak.conf mustek_usb.conf ricoh.conf st400.conf umax.conf apple.conf cardscan.conf dll.d gt68xx.conf leo.conf nec.conf rts8891.conf stv680.conf umax_pp.conf artec.conf coolscan2.conf dmc.conf hp3900.conf lexmark.conf net.conf s9036.conf tamarack.conf v4l.conf artec_eplus48u.conf coolscan3.conf epjitsu.conf hp4200.conf ma1509.conf p5.conf saned.conf teco1.conf xerox_mfp.conf avision.conf coolscan.conf epson2.conf hp5400.conf matsushita.conf pie.conf sceptre.conf teco2.conf bh.conf dc210.conf epson.conf hp.conf microtek2.conf pixma.conf sharp.conf teco3.conf canon630u.conf dc240.conf fujitsu.conf hpsj5s.conf microtek.conf plustek.conf sm3840.conf test.conf canon.conf dc25.conf genesys.conf hs2p.conf mustek.conf plustek_pp.conf snapscan.conf u12.conf /etc/sane.d #------------------------------ General ----------------------------------- # Change to the fully qualified filename of your firmware file, if # firmware upload is needed by the scanner firmware /usr/share/sane/snapscan/your-firmwarefile.bin # If not automatically found you may manually specify a device name. # For USB scanners also specify bus=usb, e.g. # /dev/usb/scanner0 bus=usb # For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux. # /dev/sg0 #--------------------------------------------------------------------------- # No changes should be necessary below this line #--------------------------------------------------------------------------- #-------------------------- SCSI scanners ---------------------------------- # These SCSI devices will be probed automatically scsi AGFA * Scanner scsi COLOR * Scanner scsi Color * Scanner scsi ACERPERI * Scanner #--------------------------- USB scanners ----------------------------------- # These USB devices will be probed automatically # (This will currently work only on Linux) # Benq/Acer/Vuego 310U usb 0x04a5 0x1a20 usb 0x04a5 0x1a26 # Benq/Acer/Vuego 320U usb 0x04a5 0x2022 # Benq/Acer/Vuego 620U / 620UT usb 0x04a5 0x1a2a usb 0x04a5 0x2040 # Benq/Acer/Vuego 640U usb 0x04a5 0x2060 # Benq/Acer/Vuego 640BU usb 0x04a5 0x207e # Benq/Acer/Vuego 640BT usb 0x04a5 0x20be # Benq/Acer/Vuego 1240U usb 0x04a5 0x20c0 # Benq/Acer/Vuego 3300 / 4300 usb 0x04a5 0x20b0 # Benq/Acer/Vuego 4300 usb 0x04a5 0x20de # Benq 5000E / 5000U usb 0x04a5 0x20f8 # Benq 5000 usb 0x04a5 0x20fc # Benq/Acer 5300 usb 0x04a5 0x20fe # Benq 5250C usb 0x04a5 0x2137 # Agfa 1236U usb 0x06bd 0x0002 # Agfa 1212U usb 0x06bd 0x0001 usb 0x06bd 0x2061 # Agfa Snapscan e10 usb 0x06bd 0x2093 # Agfa Snapscan e20 usb 0x06bd 0x2091 # Agfa Snapscan e25 usb 0x06bd 0x2095 # Agfa Snapscan e26 usb 0x06bd 0x2097 # Agfa Snapscan e40 usb 0x06bd 0x208d # Agfa Snapscan e42 usb 0x06bd 0x20ff # Agfa Snapscan e50 usb 0x06bd 0x208f # Agfa Snapscan e52 usb 0x06bd 0x20fd # Epson Perfection 660 usb 0x04b8 0x0114 # Epson Perfection 1670 usb 0x04b8 0x011f # Epson Perfection 2480 usb 0x04b8 0x0121 # Epson Perfection 3490 usb 0x04b8 0x0122 # Epson Stylus CX-1500 usb 0x04b8 0x080c I think that the net should see the printer somehow when I nmap it, telling that scanimage is shared and everyone on the network can scan. It is not really a bug. Maybe you could place it to wishlist as "making sane simpler and user-friendly" All the best Kind regards Y. -- System Information: Debian Release: 6.0.2 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686-bigmem (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libsane depends on: ii adduser 3.112+nmu2 add and remove users and groups ii libavahi-client3 0.6.27-2+squeeze1 Avahi client library ii libavahi-common3 0.6.27-2+squeeze1 Avahi common library ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib ii libexif12 0.6.19-1 library to parse EXIF files ii libgphoto2-2 2.4.6-3 gphoto2 digital camera library ii libgphoto2-port0 2.4.6-3 gphoto2 digital camera port librar ii libieee1284-3 0.2.11-6 cross-platform library for paralle ii libjpeg62 6b1-1 The Independent JPEG Group's JPEG ii libsane-extras 1.0.21.2 API library for scanners -- extra ii libtiff4 3.9.4-5+squeeze3 Tag Image File Format (TIFF) libra ii libusb-0.1-4 2:0.1.12-16 userspace USB programming library ii libv4l-0 0.8.0-1 Collection of video4linux support ii udev 164-3 /dev/ and hotplug management daemo Versions of packages libsane recommends: ii sane-utils 1.0.21-9 API library for scanners -- utilit Versions of packages libsane suggests: ii avahi-daemon 0.6.27-2+squeeze1 Avahi mDNS/DNS-SD daemon ii hplip 3.10.6-2 HP Linux Printing and Imaging Syst pn hpoj <none> (no description available) -- Configuration Files: /etc/sane.d/net.conf changed: 192.168.1.4 -- no debconf information -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
