Package: radvd
Version: 1:1.6-1.1
Severity: normal
Package radvd fails to start on boot sequence without any warning or error
message to daemon.log/syslog. I am using a hurricane electric ipv6 tunnel with
following configuration:
auto he-ipv6
iface he-ipv6 inet6 v4tunnel
address 2001:470:1f0b:cf5::2
netmask 64
endpoint 216.66.80.30
local 192.168.10.103
gateway 2001:470:1f0b:cf5::1
ttl 64
I am routing all IPv6 traffic from my local network to this ipv6 interface.
When I start radvd manually it starts without any problems and all LAN client
PCs are receiving automaticly-configured IPv6 addresses. I've also tried to add
ipv6 to /etc/modules just to be sure.
I am able to provide any information that would be necessary to solve this
problem.
Thanks!
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.39-bpo.2-686-pae (SMP w/2 CPU cores)
Locale: LANG=cs_CZ.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages radvd depends on:
ii adduser 3.112+nmu2 add and remove users and groups
ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib
radvd recommends no packages.
radvd suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
