On 12/10/2011 04:37 PM, Roland Gruber wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I have some problem to get a Sitecom USB WLAN stick to run.
Ben tried to help me but we did not get it to work. So he pointed me to you. :)
It is the Sitecom WLA-2000 v1.001.
Vendor 0df6
Product 005d
Chipset Realtek RTL8191S
Dec 10 18:45:10 roland kernel: [18513.016012] usb 2-3: new high speed USB
device number 9 using ehci_hcd
Dec 10 18:45:10 roland kernel: [18513.151122] usb 2-3: New USB device found,
idVendor=0df6, idProduct=005d
Dec 10 18:45:10 roland kernel: [18513.151126] usb 2-3: New USB device strings:
Mfr=1, Product=2, SerialNumber=3
Dec 10 18:45:10 roland kernel: [18513.151129] usb 2-3: Product: RTL8191S WLAN
Adapter
Dec 10 18:45:10 roland kernel: [18513.151130] usb 2-3: Manufacturer:
Manufacturer Realtek
Dec 10 18:45:10 roland kernel: [18513.151132] usb 2-3: SerialNumber:
00e04c000001
We tried to use the kernel module rtl8192cu by adding the IDs with "echo 0df6 005d>
/sys/bus/usb/drivers/rtl8192cu/new_id".
But this led to a kernel oops.
Is there any way to setup the rtl8192cu kernel module so that it accepts the
WLAN stick?
We also tried the module r8192u_usb but it complains about firmware loading
problems when connecting the stick.
If rtl8192cu generates an oops when you use the new_id, then it is the wrong
driver for your device.
The driver for the RTL8188SU is r8712u. Try
modprobe -rv r8712u
echo 0df6 005d > /sys/bus/usb/drivers/r8712u/new_id
If that works, I can add that device ID to the driver.
Larry
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
