Il 13/01/2012 04:02, Rolf Leggewie ha scritto:
Hello Giorgio,
thank you for your report.
On 12.01.2012 18:35, Giorgio Volpe wrote:
I recently update isdnutils-base from 1:3.9.20060704+dfsg.2-4 to
1:3.9.20060704+dfsg.2-12 and isdnutils doesn’t work
I believe the problems you were seeing were fixed in the upload I made a
few hours before you filed this ticket. Please retry with that version
once it is available to you.
Regards
Rolf
Today I upgraded
[AGGIORNATO] isdnlog 1:3.9.20060704+dfsg.2-12 -> 1:3.9.20060704+dfsg.3-3
[AGGIORNATO] isdnlog-data 1:3.9.20060704+dfsg.2-12 ->
1:3.9.20060704+dfsg.3-3
[AGGIORNATO] isdnutils-base 1:3.9.20060704+dfsg.2-12 ->
1:3.9.20060704+dfsg.3-3
[AGGIORNATO] isdnutils-doc 1:3.9.20060704+dfsg.2-12 ->
1:3.9.20060704+dfsg.3-3
[AGGIORNATO] isdnutils-xtools 1:3.9.20060704+dfsg.2-12 ->
1:3.9.20060704+dfsg.3-
3
[AGGIORNATO] isdnvbox 1:3.9.20060704+dfsg.2-12 -> 1:3.9.20060704+dfsg.3-3
[AGGIORNATO] isdnvboxclient 1:3.9.20060704+dfsg.2-12 ->
1:3.9.20060704+dfsg.3-3
[AGGIORNATO] isdnvboxserver 1:3.9.20060704+dfsg.2-12 ->
1:3.9.20060704+dfsg.3-3
The problem is still there! :-(
Now devices are created but I always get "/dev/isdnctrl: No such device"
I think it comes from a "hisaxctrl - 1 4" in init.d.functions
Can you help me to control which modulese should I have installed for a
USB TA?
I'have this in syslog when I connect it
Jan 30 10:01:53 movi kernel: [1521202.316016] usb 2-3: new full speed
USB device using ohci_hcd and address 4
Jan 30 10:01:53 movi kernel: [1521202.564807] usb 2-3: New USB device
found, idVendor=07b0, idProduct=0007
Jan 30 10:01:53 movi kernel: [1521202.564838] usb 2-3: New USB device
strings: Mfr=1, Product=1, SerialNumber=1
Jan 30 10:01:53 movi kernel: [1521202.564874] usb 2-3: Product: ISDN USB TA
Jan 30 10:01:53 movi kernel: [1521202.564895] usb 2-3: Manufacturer:
ISDN USB TA
Jan 30 10:01:53 movi kernel: [1521202.564916] usb 2-3: SerialNumber:
ISDN USB TA
Jan 30 10:01:53 movi kernel: [1521202.565083] usb 2-3: configuration #1
chosen from 1 choice
Jan 30 10:01:53 movi kernel: [1521202.567857] hfcsusb_probe:
interface(0) actalt(0) minor(-1) vend_idx(2)
Jan 30 10:01:53 movi kernel: [1521202.567893] HFC-S_USB: probe of
2-3:1.0 failed with error -5
Jan 30 10:01:53 movi kernel: [1521202.567924] HFC-S USB: probing
interface(0) actalt(0) minor(-1)
Jan 30 10:01:53 movi kernel: [1521202.567952] hfc_usb: probe of 2-3:1.0
failed with error -5
Jan 30 10:01:53 movi kernel: [1521202.568037] hfcsusb_probe:
interface(1) actalt(0) minor(-1) vend_idx(2)
Jan 30 10:01:53 movi kernel: [1521202.568075] HFC-S_USB: hfcsusb_probe:
detected "Billion tiny USB ISDN TA 128" (4 Isochron IN + 3 Isochron OUT,
if=1 alt=1)
Jan 30 10:01:53 movi kernel: [1521202.573992] HFC-S_USB: registered as
'HFC-S_USB.1'
Jan 30 10:01:54 movi mtp-probe: checking bus 2, device 4:
"/sys/devices/pci0000:00/0000:00:03.0/usb2/2-3"
Jan 30 10:01:54 movi mtp-probe: bus: 2, device: 4 was not an MTP device
Thannks ...
Giorgio
--
*MoVI Regionale FVG
*Via Garibaldi 23, 33038-San Daniele del Friuli.
*Tel*. 0432 943002 - *Cell*. 346 8216304
*Email* giorgio.vo...@movi.fvg.it
