Package: linux-image-2.6.26-1-686
Followup-For: Bug #494374
This bug is fixed on my ASUS L2000D, too. Great.
Karsten
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-8) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9 15:18:09 UTC
2008
** Command line:
root=/dev/hda1 ro vga=791 lapic resume=/dev/hda5
** Not tainted
** Kernel log:
[ 9.812583] hdc: UDMA/33 mode selected
[ 9.861947] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 10.392005] ide1 at 0x170-0x177,0x376 on irq 15
[ 10.564264] hda: max request size: 512KiB
[ 10.627590] hda: 156301488 sectors (80026 MB) w/8192KiB Cache,
CHS=16383/255/63
[ 10.680003] hda: cache flushes supported
[ 10.724161] hda: hda1 hda2 < hda5 >
[ 10.807649] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 10.856228] Uniform CD-ROM driver Revision: 3.20
[ 11.338322] PM: Starting manual resume from disk
[ 11.571725] kjournald starting. Commit interval 5 seconds
[ 11.621145] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.039207] udevd version 125 started
[ 16.323966] Linux agpgart interface v0.103
[ 17.085216] agpgart: Detected SiS chipset - id:1840
[ 17.144003] agpgart: AGP aperture is 64M @ 0xec000000
[ 17.293404] input: Power Button (FF) as /class/input/input2
[ 18.016350] ACPI: Power Button (FF) [PWRF]
[ 18.780550] input: Power Button (CM) as /class/input/input3
[ 19.347220] ACPI: Power Button (CM) [PWRB]
[ 19.539006] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.789627] Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1594]
[ 19.973875] input: PC Speaker as /class/input/input4
[ 20.079072] input: Sleep Button (CM) as /class/input/input5
[ 20.511380] ACPI: Unable to turn cooling device [db422748] 'on'
[ 20.684701] Yenta: ISA IRQ mask 0x0498, PCI irq 11
[ 20.735448] Socket status: 30000006
[ 20.828787] ACPI: Sleep Button (CM) [SLPB]
[ 20.946897] Asus Laptop ACPI Extras version 0.30
[ 21.003432] L2D model detected, supported
[ 21.078390] Yenta: CardBus bridge found at 0000:00:0a.1 [1043:1594]
[ 21.389124] input: Lid Switch as /class/input/input6
[ 21.451792] Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps:
0x80471b/0x0
[ 21.502264] Yenta: ISA IRQ mask 0x0018, PCI irq 5
[ 21.551088] Socket status: 30000006
[ 21.604005] ACPI: Lid Switch [LID]
[ 21.652765] ACPI: AC Adapter [AC] (on-line)
[ 21.766391] ACPI: Battery Slot [BAT0] (battery present)
[ 21.852789] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 21.939174] parport_pc 00:0a: reported by Plug and Play ACPI
[ 21.988869] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 22.093084] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
[ 22.143178] PCI: setting IRQ 3 as level-triggered
[ 22.143183] ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 3
(level, low) -> IRQ 3
[ 22.284601] Error: Driver 'pcspkr' is already registered, aborting...
[ 22.715376] ACPI: PCI Interrupt 0000:00:01.6[C] -> Link [LNKC] -> GSI 5
(level, low) -> IRQ 5
[ 22.783906] gameport: Trident 4DWave is pci0000:00:01.4/gameport0, speed
2130kHz
[ 22.836965] codec_semaphore: semaphore is not ready [0x1][0x1300]
[ 22.889524] codec_semaphore: semaphore is not ready [0x1][0x1300]
[ 22.940706] codec_semaphore: semaphore is not ready [0x1][0x1300]
[ 22.991149] codec_semaphore: semaphore is not ready [0x1][0x300]
[ 23.040762] codec_semaphore: semaphore is not ready [0x1][0x300]
[ 23.091536] codec_semaphore: semaphore is not ready [0x1][0x300]
[ 23.139869] codec_semaphore: semaphore is not ready [0x1][0x300]
[ 23.185105] codec_semaphore: semaphore is not ready [0x1][0x300]
[ 23.231767] codec_semaphore: semaphore is not ready [0x1][0x300]
[ 23.995341] cs: IO port probe 0x100-0x3af: clean.
[ 24.041916] cs: IO port probe 0x100-0x3af: clean.
[ 24.189370] cs: IO port probe 0x3e0-0x4ff: clean.
[ 24.233240] cs: IO port probe 0x3e0-0x4ff: clean.
[ 24.275387] cs: IO port probe 0x820-0x8ff: clean.
[ 24.322868] cs: IO port probe 0x820-0x8ff: clean.
[ 24.364650] cs: IO port probe 0xc00-0xcf7: clean.
[ 24.402739] cs: IO port probe 0xc00-0xcf7: clean.
[ 24.441138] cs: IO port probe 0xa00-0xaff: clean.
[ 24.478657] cs: IO port probe 0xa00-0xaff: clean.
[ 24.520012] AC'97 1 does not respond - RESET
[ 24.556644] codec_semaphore: semaphore is not ready [0x1][0x300]
[ 24.593553] codec_semaphore: semaphore is not ready [0x1][0x300]
[ 24.628550] AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 24.663648] Unable to initialize codec #1
[ 24.698342] ACPI: PCI interrupt for device 0000:00:01.6 disabled
[ 24.732436] Intel ICH Modem: probe of 0000:00:01.6 failed with error -5
[ 24.767989] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.605406] EXT3 FS on hda1, internal journal
[ 27.105546] loop: module loaded
[ 27.426215] device-mapper: uevent: version 1.0.3
[ 27.467167] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
[EMAIL PROTECTED]
[ 30.836261] Adding 1048568k swap on /swapfile.2. Priority:10 extents:1724
across:1967032k
[ 35.500013] eth1: Media Link On 100mbps full-duplex
[ 38.921191] NET: Registered protocol family 10
[ 38.971584] lo: Disabled Privacy Extensions
[ 46.732999] powernow: PowerNOW! Technology present. Can scale: frequency and
voltage.
[ 46.737663] powernow: SGTC: 30000
[ 46.737667] powernow: Minimum speed 995 MHz. Maximum speed 1393 MHz.
[ 49.788050] eth1: no IPv6 routers present
[ 59.504931] warning: `avahi-daemon' uses 32-bit capabilities (legacy support
in use)
[ 60.068469] lp0: using parport0 (interrupt-driven).
[ 60.164623] ppdev: user-space parallel port driver
[ 60.207492] Marking TSC unstable due to: cpufreq changes.
[ 60.728036] Clocksource tsc unstable (delta = -140313002 ns)
[ 64.662298] NET: Registered protocol family 23
[ 65.450675] ACPI: Unable to turn cooling device [db422748] 'on'
[ 87.098830] [drm] Initialized drm 1.1.0 20060810
[ 87.107329] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 87.107585] [drm] Initialized sis 1.3.0 20070626 on minor 0
[ 87.109728] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 87.109782] agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
[ 87.109834] agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
[ 492.557326] ACPI: Unable to turn cooling device [db422748] 'on'
** Loaded modules:
Module Size Used by
sis 5184 2
drm 65256 3 sis
binfmt_misc 7528 1
irtty_sir 4480 0
sir_dev 10724 1 irtty_sir
irda 95480 1 sir_dev
crc_ccitt 2080 1 irda
ppdev 6468 0
lp 8164 0
video 16400 0
output 2912 1 video
powernow_k7 6120 0
cpufreq_userspace 3172 0
cpufreq_stats 3776 0
cpufreq_conservative 5960 0
cpufreq_powersave 1856 0
cpufreq_ondemand 6476 1
freq_table 4224 3 powernow_k7,cpufreq_stats,cpufreq_ondemand
ipv6 235300 20
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
sbp2 18572 0
loop 12748 0
joydev 8480 0
pcmcia 29548 0
firmware_class 6816 1 pcmcia
snd_trident 32804 0
led_class 3908 0
gameport 10700 2 snd_trident
snd_intel8x0m 12492 0
snd_ac97_codec 88484 2 snd_trident,snd_intel8x0m
ac97_bus 1728 1 snd_ac97_codec
snd_util_mem 4032 1 snd_trident
snd_mpu401_uart 6368 1 snd_trident
snd_pcm_oss 32800 0
snd_pcm 62628 4
snd_trident,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss
snd_mixer_oss 12320 1 snd_pcm_oss
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
serio_raw 4740 0
psmouse 32336 0
shpchp 25528 0
snd_seq_dummy 2660 0
pcspkr 2432 0
yenta_socket 20620 2
rsrc_nonstatic 9504 1 yenta_socket
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
pci_hotplug 23460 1 shpchp
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18560 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 12
snd_trident,snd_intel8x0m,snd_ac97_codec,snd_mpu401_uart,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
battery 10180 0
asus_acpi 13852 0
ac 4196 0
button 6064 0
snd_page_alloc 7816 3 snd_trident,snd_intel8x0m,snd_pcm
sis_agp 6752 1
soundcore 6368 1 snd
i2c_sis630 5644 0
i2c_core 19828 1 i2c_sis630
agpgart 28776 2 drm,sis_agp
evdev 8000 6
ext3 105256 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 3
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
sis5513 6788 0 [permanent]
floppy 47716 0
ide_pci_generic 3908 0 [permanent]
ohci_hcd 18500 0
ohci1394 24944 0
ieee1394 75800 2 sbp2,ohci1394
ide_core 96168 4 ide_cd_mod,ide_disk,sis5513,ide_pci_generic
ata_generic 4676 0
libata 140384 1 ata_generic
usbcore 118160 3 usbhid,ohci_hcd
scsi_mod 129356 2 sbp2,libata
sis900 17312 0
mii 4896 1 sis900
dock 8272 1 libata
thermal 15228 0
processor 32576 2 powernow_k7,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 730 Host
[1039:0730] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x2
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00:00.1 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE]
[1039:5513] (rev d0) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:1598]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 16
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at d800 [size=16]
Kernel driver in use: SIS_IDE
Kernel modules: sis5513
00:01.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
Bridge) [1039:0018]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: sis630_smbus
Kernel modules: i2c-sis630
00:01.1 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI
Fast Ethernet [1039:0900] (rev 82)
Subsystem: ASUSTeK Computer Inc. Device [1043:1455]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at eb800000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 30000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=160mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sis900
Kernel modules: sis900
00:01.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 07) (prog-if 10)
Subsystem: Silicon Integrated Systems [SiS] USB 1.1 Controller
[1039:7001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at eb000000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:01.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 07) (prog-if 10)
Subsystem: Silicon Integrated Systems [SiS] Device [1039:7000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at ea800000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:01.4 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS]
SiS PCI Audio Accelerator [1039:7018] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1453]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin B routed to IRQ 3
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at ea000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=55mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Trident4DWaveAudio
Kernel modules: trident, snd-trident
00:01.6 Modem [0703]: Silicon Integrated Systems [SiS] AC'97 Modem Controller
[1039:7013] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:1457]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at b800 [size=256]
Region 1: I/O ports at b400 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: snd-intel8x0m
00:02.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI
bridge (AGP) [1039:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e9800000-e9ffffff
Prefetchable memory behind bridge: f0000000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:0a.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 80)
Subsystem: ASUSTeK Computer Inc. Device [1043:1594]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 30020000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0a.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 80)
Subsystem: ASUSTeK Computer Inc. Device [1043:1594]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 5
Region 0: Memory at 30021000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 28000000-2bfff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:1597]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e9000000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e8800000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci1394
Kernel modules: ohci1394
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS]
630/730 PCI/AGP VGA Display Adapter [1039:6300] (rev 31)
Subsystem: ASUSTeK Computer Inc. Device [1043:1452]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
BIST result: 00
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e9800000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a800 [size=128]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=16 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x2
Kernel modules: sisfb
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-14 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
