--- Begin Message ---
Package: rt73-modules-2.6.26-2-686
Version: 2.6.26+1.0.3.6-cvs20080623-dfsg1-3+lenny1
Severity: grave
Justification: renders package unusable
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-15) (da...@debian.org)
(gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26
01:08:11 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffbe000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262064
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262064
[ 0.000000] On node 0 totalpages: 262064
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32432 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FA850, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 3FFB0100, 0044 (r1 A M I OEMXSDT 11000620 MSFT
97)
[ 0.000000] ACPI: FACP 3FFB0290, 00F4 (r3 A M I OEMFACP 11000620 MSFT
97)
[ 0.000000] ACPI: DSDT 3FFB0440, 49B0 (r1 A0710 A0710000 0 INTL
2002026)
[ 0.000000] ACPI: FACS 3FFBE000, 0040
[ 0.000000] ACPI: APIC 3FFB0390, 0068 (r1 A M I OEMAPIC 11000620 MSFT
97)
[ 0.000000] ACPI: MCFG 3FFB0400, 003C (r1 A M I OEMMCFG 11000620 MSFT
97)
[ 0.000000] ACPI: OEMB 3FFBE040, 0046 (r1 A M I AMI_OEM 11000620 MSFT
97)
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 260016
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 1995.352 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1027556k/1048256k available (1769k kernel code, 19988k
reserved, 752k data, 244k init, 130752k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4eb - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4eb (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084100] Calibrating delay using timer specific routine.. 3993.31
BogoMIPS (lpj=7986634)
[ 0.084134] Security Framework initialized
[ 0.084139] SELinux: Disabled at boot.
[ 0.084142] Capability LSM initialized
[ 0.084156] Mount-cache hash table entries: 512
[ 0.084287] Initializing cgroup subsys ns
[ 0.084290] Initializing cgroup subsys cpuacct
[ 0.084293] Initializing cgroup subsys devices
[ 0.084310] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.084312] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.084315] Intel machine check architecture supported.
[ 0.084318] Intel machine check reporting enabled on CPU#0.
[ 0.084329] Checking 'hlt' instruction... OK.
[ 0.100301] SMP alternatives: switching to UP code
[ 0.106131] ACPI: Core revision 20080321
[ 0.112007] ENABLING IO-APIC IRQs
[ 0.112007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.151702] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02
[ 0.152009] Brought up 1 CPUs
[ 0.152009] Total of 1 processors activated (3993.31 BogoMIPS).
[ 0.152009] CPU0 attaching sched-domain:
[ 0.152009] domain 0: span 0
[ 0.152009] groups: 0
[ 0.152009] net_namespace: 660 bytes
[ 0.152009] Booting paravirtualized kernel on bare hardware
[ 0.152009] NET: Registered protocol family 16
[ 0.152009] ACPI: bus type pci registered
[ 0.152009] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.152009] PCI: Not using MMCONFIG.
[ 0.152009] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.152009] PCI: Using configuration type 1 for base access
[ 0.152009] Setting up standard PCI resources
[ 0.156009] ACPI: EC: Look up EC in DSDT
[ 0.161974] ACPI: Interpreter enabled
[ 0.161977] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.161991] ACPI: Using IOAPIC for interrupt routing
[ 0.162041] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.165709] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.165711] PCI: Using MMCONFIG for extended config space
[ 0.170899] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.172010] PCI: Transparent bridge - 0000:00:13.1
[ 0.172010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.172236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.172311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.172435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.172505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.172591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[ 0.187319] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.187424] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.187527] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.187632] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.187735] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.187838] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.187941] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.188011] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.188149] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB]
- 47, should be 41 [20080321]
[ 0.188157] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.188180] pnp: PnP ACPI init
[ 0.188187] ACPI: bus type pnp registered
[ 0.191152] pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR
8 (0x0-0xfffff), disabling
[ 0.191156] pnp 00:0d: mem resource (0xc0000-0xcffff) overlaps 0000:00:03.0
BAR 8 (0x0-0xfffff), disabling
[ 0.191159] pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:03.0
BAR 8 (0x0-0xfffff), disabling
[ 0.191505] pnp: PnP ACPI: found 14 devices
[ 0.191507] ACPI: ACPI bus type pnp unregistered
[ 0.191510] PnPBIOS: Disabled by ACPI PNP
[ 0.191705] PCI: Using ACPI for IRQ routing
[ 0.191710] PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
[ 0.191974] ACPI: RTC can wake from S4
[ 0.191996] system 00:06: ioport range 0x290-0x297 has been reserved
[ 0.192003] system 00:07: ioport range 0x3e0-0x3e7 has been reserved
[ 0.192006] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.192009] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.192012] system 00:07: ioport range 0x400-0x41f has been reserved
[ 0.192012] system 00:07: iomem range 0xff300000-0xff3fffff has been reserved
[ 0.192024] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.192028] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.192035] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.192041] system 00:0d: iomem range 0x100000-0x3fffffff could not be
reserved
[ 0.192045] system 00:0d: iomem range 0xff780000-0xffffffff could not be
reserved
[ 0.222370] PCI: Bridge: 0000:00:01.0
[ 0.222372] IO window: disabled.
[ 0.222376] MEM window: disabled.
[ 0.222379] PREFETCH window: disabled.
[ 0.222384] PCI: Bridge: 0000:00:02.0
[ 0.222386] IO window: disabled.
[ 0.222391] MEM window: 0xf9000000-0xfbefffff
[ 0.222395] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.222401] PCI: Bridge: 0000:00:03.0
[ 0.222402] IO window: disabled.
[ 0.222407] MEM window: disabled.
[ 0.222410] PREFETCH window: disabled.
[ 0.222416] PCI: Bridge: 0000:00:13.0
[ 0.222417] IO window: disabled.
[ 0.222421] MEM window: 0xfbf00000-0xfbffffff
[ 0.222425] PREFETCH window: disabled.
[ 0.222429] PCI: Bridge: 0000:00:13.1
[ 0.222431] IO window: disabled.
[ 0.222434] MEM window: disabled.
[ 0.222437] PREFETCH window: disabled.
[ 0.222454] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.222468] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) ->
IRQ 27
[ 0.222474] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.222487] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) ->
IRQ 31
[ 0.222493] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.222503] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 0.222513] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 0.222542] NET: Registered protocol family 2
[ 0.222624] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.222911] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.223594] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.223925] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.223928] TCP reno registered
[ 0.224029] Switched to high resolution mode on CPU 0
[ 0.224048] NET: Registered protocol family 1
[ 0.224152] checking if image is initramfs... it is
[ 0.824715] Freeing initrd memory: 7655k freed
[ 0.825332] audit: initializing netlink socket (disabled)
[ 0.825344] type=2000 audit(1239949287.824:1): initialized
[ 0.825476] highmem bounce pool size: 64 pages
[ 0.825480] Total HugeTLB memory allocated, 0
[ 0.825557] VFS: Disk quotas dquot_6.5.1
[ 0.825587] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.825623] msgmni has been set to 1767
[ 0.825723] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.825727] io scheduler noop registered
[ 0.825728] io scheduler anticipatory registered
[ 0.825730] io scheduler deadline registered
[ 0.825744] io scheduler cfq registered (default)
[ 0.825751] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.825762] PCI: VIA PCI bridge detected.Disabling DAC.
[ 0.825852] pci 0000:02:00.0: Boot video device
[ 0.825958] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.825995] assign_interrupt_mode Found MSI capability
[ 0.825998] Allocate Port Service[0000:00:02.0:pcie00]
[ 0.826033] Allocate Port Service[0000:00:02.0:pcie01]
[ 0.826065] Allocate Port Service[0000:00:02.0:pcie02]
[ 0.826095] Allocate Port Service[0000:00:02.0:pcie03]
[ 0.826174] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.826210] assign_interrupt_mode Found MSI capability
[ 0.826212] Allocate Port Service[0000:00:03.0:pcie00]
[ 0.826247] Allocate Port Service[0000:00:03.0:pcie01]
[ 0.826277] Allocate Port Service[0000:00:03.0:pcie02]
[ 0.826308] Allocate Port Service[0000:00:03.0:pcie03]
[ 0.828037] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC
support
[ 0.829567] AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC
support
[ 0.829747] isapnp: Scanning for PnP cards...
[ 1.183826] isapnp: No Plug & Play device found
[ 1.185985] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 1.186147] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.186476] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.187720] brd: module loaded
[ 1.187799] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[ 1.188404] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.188409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.188540] mice: PS/2 mouse device common for all mice
[ 1.188649] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.188672] rtc0: alarms up to one year, y3k
[ 1.188701] cpuidle: using governor ladder
[ 1.188704] cpuidle: using governor menu
[ 1.188708] No iBFT detected.
[ 1.189150] TCP cubic registered
[ 1.189153] NET: Registered protocol family 17
[ 1.189158] Using IPI No-Shortcut mode
[ 1.189255] registered taskstats version 1
[ 1.189412] rtc_cmos 00:02: setting system clock to 2009-04-17 06:21:29 UTC
(1239949289)
[ 1.189566] Freeing unused kernel memory: 244k freed
[ 1.218347] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.296688] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.296727] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.296731] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 1.501771] Linux agpgart interface v0.103
[ 1.502693] agpgart: Detected AGP bridge 0
[ 1.506160] agpgart: AGP aperture is 128M @ 0xf0000000
[ 1.596174] No dock devices found.
[ 1.604676] SCSI subsystem initialized
[ 1.613869] libata version 3.00 loaded.
[ 1.614688] sata_via 0000:00:0f.0: version 2.3
[ 1.614710] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) ->
IRQ 21
[ 1.614745] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.614795] scsi0 : sata_via
[ 1.614868] scsi1 : sata_via
[ 1.616098] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 21
[ 1.616101] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 21
[ 1.620243] Uniform Multi-Platform E-IDE driver
[ 1.620247] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 1.625881] usbcore: registered new interface driver usbfs
[ 1.625906] usbcore: registered new interface driver hub
[ 1.625937] usbcore: registered new device driver usb
[ 1.640114] USB Universal Host Controller Interface driver v3.0
[ 1.653828] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.824031] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.988322] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
[ 1.988325] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.020321] ata1.00: configured for UDMA/133
[ 2.224026] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.224107] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10
PQ: 0 ANSI: 5
[ 2.224429] VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at PCI slot
0000:00:0f.1
[ 2.224453] VP_IDE: not 100% native mode: will probe irqs later
[ 2.224470] VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on
pci0000:00:0f.1
[ 2.224478] ide0: BM-DMA at 0xfc00-0xfc07
[ 2.224485] ide1: BM-DMA at 0xfc08-0xfc0f
[ 2.224488] Probing IDE interface ide0...
[ 3.088121] hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive
[ 3.872125] hdb: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
[ 3.928050] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.928154] hda: UDMA/33 mode selected
[ 3.928310] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.929047] hdb: UDMA/33 mode selected
[ 3.929511] Probing IDE interface ide1...
[ 4.496053] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.509915] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.509915] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) ->
IRQ 20
[ 4.509915] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 4.509915] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[ 4.509915] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c800
[ 4.509915] usb usb1: configuration #1 chosen from 1 choice
[ 4.509915] hub 1-0:1.0: USB hub found
[ 4.509915] hub 1-0:1.0: 2 ports detected
[ 4.616101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.616103] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.616106] usb usb1: Product: UHCI Host Controller
[ 4.616108] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 4.616110] usb usb1: SerialNumber: 0000:00:10.0
[ 4.616170] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) ->
IRQ 22
[ 4.616176] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 4.616194] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[ 4.616215] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c400
[ 4.616278] usb usb2: configuration #1 chosen from 1 choice
[ 4.616302] hub 2-0:1.0: USB hub found
[ 4.616310] hub 2-0:1.0: 2 ports detected
[ 4.720109] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.720113] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.720115] usb usb2: Product: UHCI Host Controller
[ 4.720117] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 4.720119] usb usb2: SerialNumber: 0000:00:10.1
[ 4.721124] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) ->
IRQ 21
[ 4.721134] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 4.721157] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 3
[ 4.721178] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
[ 4.721247] usb usb3: configuration #1 chosen from 1 choice
[ 4.721270] hub 3-0:1.0: USB hub found
[ 4.721277] hub 3-0:1.0: 2 ports detected
[ 4.824110] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.824113] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.824116] usb usb3: Product: UHCI Host Controller
[ 4.824118] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 4.824120] usb usb3: SerialNumber: 0000:00:10.2
[ 4.824180] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) ->
IRQ 23
[ 4.824188] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 4.824208] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 4
[ 4.824233] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000b800
[ 4.824300] usb usb4: configuration #1 chosen from 1 choice
[ 4.824325] hub 4-0:1.0: USB hub found
[ 4.824332] hub 4-0:1.0: 2 ports detected
[ 4.928081] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.928083] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.928086] usb usb4: Product: UHCI Host Controller
[ 4.928088] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 4.928089] usb usb4: SerialNumber: 0000:00:10.3
[ 4.928127] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) ->
IRQ 21
[ 4.928139] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 4.928159] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 5
[ 4.928187] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf8fffc00
[ 4.940031] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 4.940089] usb usb5: configuration #1 chosen from 1 choice
[ 4.940111] hub 5-0:1.0: USB hub found
[ 4.940118] hub 5-0:1.0: 8 ports detected
[ 5.044087] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.044090] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.044092] usb usb5: Product: EHCI Host Controller
[ 5.044094] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 5.044096] usb usb5: SerialNumber: 0000:00:10.4
[ 5.044178] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) ->
IRQ 23
[ 5.044445] eth0: VIA Rhine II at 0x1b400, 00:15:f2:cf:f7:42, IRQ 23.
[ 5.045158] eth0: MII PHY found at address 1, status 0x786d advertising 01e1
Link 45e1.
[ 5.053942] Driver 'sd' needs updating - please use bus_type methods
[ 5.054034] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 5.054051] sd 0:0:0:0: [sda] Write Protect is off
[ 5.054054] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.054080] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.054133] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 5.054147] sd 0:0:0:0: [sda] Write Protect is off
[ 5.054150] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.054175] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.054179] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 5.146204] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.164977] hda: ATAPI 48X DVD-ROM drive, 256kB Cache
[ 5.164984] Uniform CD-ROM driver Revision: 3.20
[ 5.169094] hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 5.447035] PM: Starting manual resume from disk
[ 5.470340] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.470344] EXT3-fs: write access will be enabled during recovery.
[ 5.880032] usb 5-4: new high speed USB device using ehci_hcd and address 2
[ 6.146186] usb 5-4: configuration #1 chosen from 1 choice
[ 6.155830] usb 5-4: New USB device found, idVendor=0b05, idProduct=1723
[ 6.155834] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.155837] usb 5-4: Product: 802.11 bg WLAN
[ 6.155838] usb 5-4: Manufacturer: Ralink
[ 6.392018] usb 5-7: new high speed USB device using ehci_hcd and address 3
[ 6.468073] kjournald starting. Commit interval 5 seconds
[ 6.468073] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 6.468073] ext3_orphan_cleanup: deleting unreferenced inode 4643983
[ 6.468073] ext3_orphan_cleanup: deleting unreferenced inode 4643980
[ 6.468073] ext3_orphan_cleanup: deleting unreferenced inode 4643979
[ 6.468073] ext3_orphan_cleanup: deleting unreferenced inode 4643978
[ 6.468073] ext3_orphan_cleanup: deleting unreferenced inode 4643977
[ 6.468073] ext3_orphan_cleanup: deleting unreferenced inode 4643976
[ 6.468073] EXT3-fs: sda1: 6 orphan inodes deleted
[ 6.468073] EXT3-fs: recovery complete.
[ 6.500497] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.526839] usb 5-7: configuration #1 chosen from 1 choice
[ 6.527137] usb 5-7: New USB device found, idVendor=058f, idProduct=6362
[ 6.527140] usb 5-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.527143] usb 5-7: Product: Mass Storage Device
[ 6.527144] usb 5-7: Manufacturer: Generic
[ 6.527146] usb 5-7: SerialNumber: 058F312D81B
[ 7.961798] udevd version 125 started
[ 8.745230] input: Power Button (FF) as /class/input/input1
[ 8.772065] ACPI: Power Button (FF) [PWRF]
[ 8.772207] input: Power Button (CM) as /class/input/input2
[ 8.796112] ACPI: Power Button (CM) [PWRB]
[ 8.882342] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.883860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.947855] rt73: init
[ 8.947871] rt73: idVendor = 0xb05, idProduct = 0x1723
[ 8.948459] firmware: requesting rt73.bin
[ 9.062253] input: PC Speaker as /class/input/input3
[ 9.416541] Initializing USB Mass Storage driver...
[ 9.444945] rt73: using permanent MAC addr
[ 9.444949] rt73: Active MAC addr: 00:18:f3:d9:04:fc
[ 9.444952] rt73: Local MAC = 00:18:f3:d9:04:fc
[ 9.446315] scsi2 : SCSI emulation for USB Mass Storage devices
[ 9.446539] usb-storage: device found at 3
[ 9.446541] usb-storage: waiting for device to settle before scanning
[ 9.446561] usbcore: registered new interface driver rt73
[ 9.446579] usbcore: registered new interface driver usb-storage
[ 9.446582] USB Mass Storage support registered.
[ 9.616893] input: ImExPS/2 Generic Explorer Mouse as /class/input/input4
[ 9.619579] parport_pc 00:05: reported by Plug and Play ACPI
[ 9.619675] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 9.639862] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 9.639886] PCI: Setting latency timer of device 0000:04:01.0 to 64
[ 9.639890] PCI: Disallowing DAC for device 0000:04:01.0
[ 9.642659] usbcore: registered new interface driver rt73usb
[ 9.669737] hda_codec: Unknown model for ALC861, trying auto-probe from
BIOS...
[ 10.576108] Adding 2931820k swap on /dev/sda6. Priority:-1 extents:1
across:2931820k
[ 10.982884] EXT3 FS on sda1, internal journal
[ 11.160012] loop: module loaded
[ 12.016550] kjournald starting. Commit interval 5 seconds
[ 12.016598] EXT3 FS on sda5, internal journal
[ 12.016598] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.068129] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
[ 12.825174] rt73: driver version - 1.0.3.6 CVS
[ 12.858260] rt73: using net dev supplied MAC addr
[ 12.858265] rt73: Active MAC addr: 00:18:f3:d9:04:fc
[ 12.858268] rt73: Local MAC = 00:18:f3:d9:04:fc
[ 13.065804] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 14.157536] NET: Registered protocol family 10
[ 14.158025] lo: Disabled Privacy Extensions
[ 14.444145] usb-storage: device scan complete
[ 14.444760] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00
PQ: 0 ANSI: 0
[ 14.445253] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01
PQ: 0 ANSI: 0
[ 14.445750] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02
PQ: 0 ANSI: 0
[ 14.446250] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03
PQ: 0 ANSI: 0
[ 14.451382] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 14.454320] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 14.457083] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 14.458320] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 16.174908] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+
processors (1 cpu cores) (version 2.20.00)
[ 16.174939] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6
[ 16.174942] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8
[ 16.174944] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 17.878202] divide error: 0000 [#1] SMP
[ 17.878375] Modules linked in: powernow_k8 cpufreq_conservative
cpufreq_stats cpufreq_ondemand freq_table cpufreq_powersave cpufreq_userspace
ipv6 nls_utf8 nls_cp437 vfat fat nls_base loop rt73usb crc_itu_t snd_hda_intel
rt2x00usb rt2x00lib snd_pcm_oss snd_mixer_oss rfkill snd_pcm led_class
snd_seq_dummy snd_seq_oss input_polldev snd_seq_midi snd_rawmidi mac80211
cfg80211 snd_seq_midi_event snd_seq snd_timer snd_seq_device parport_pc
usb_storage serio_raw parport snd pcspkr psmouse soundcore snd_page_alloc
k8temp rt73 firmware_class i2c_viapro i2c_core shpchp pci_hotplug button evdev
ext3 jbd mbcache ide_cd_mod cdrom sd_mod ide_pci_generic ata_generic via_rhine
mii uhci_hcd ehci_hcd usbcore via82cxxx ide_core sata_via libata scsi_mod dock
amd64_agp agpgart thermal processor fan thermal_sys
[ 17.880016]
[ 17.880016] Pid: 1617, comm: rt73Mlme Not tainted (2.6.26-2-686 #1)
[ 17.880016] EIP: 0060:[<f8992ef1>] EFLAGS: 00010246 CPU: 0
[ 17.880016] EIP is at RTUSBMlmeHardTransmit+0x196/0x1b6 [rt73]
[ 17.880016] EAX: 00000042 EBX: f7b40000 ECX: 00000000 EDX: 00000000
[ 17.880016] ESI: 00000042 EDI: f7b2c042 EBP: 0000002a ESP: f7a9bed0
[ 17.880016] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 17.880016] Process rt73Mlme (pid: 1617, ti=f7a9a000 task=f754eac0
task.ti=f7a9a000)
[ 17.880016] Stack: f7b4ab59 f7b5d400 f7b2c000 f7a9bf01 00000018 f7a9bf2a
01000001 f7b40190
[ 17.880016] f7b40000 00000286 f7b5d3e4 f8992f72 f7b40000 c0c2a000
f7b5d3e4 0000002a
[ 17.880016] f8993036 f7a9bf2a f7b40000 f7b4ab4c f7b4ab59 f898ebcf
00400202 ffff0000
[ 17.880016] Call Trace:
[ 17.880016] [<f8992f72>] RTUSBDequeueMLMEPacket+0x61/0xa6 [rt73]
[ 17.880016] [<f8993036>] MiniportMMRequest+0x7f/0xa8 [rt73]
[ 17.880016] [<f898ebcf>] ScanNextChannel+0x429/0x43b [rt73]
[ 17.880016] [<f8986c60>] StaQuickResponeForRateUpExec+0x11f/0x13b [rt73]
[ 17.880016] [<f8990597>] MlmeScanReqAction+0x129/0x15e [rt73]
[ 17.880016] [<f8986ac1>] StateMachinePerformAction+0x19/0x1c [rt73]
[ 17.880016] [<f898ab79>] MlmeHandler+0xc8/0x114 [rt73]
[ 17.880016] [<f89862b0>] MlmeThread+0x52/0x72 [rt73]
[ 17.880016] [<f898625e>] MlmeThread+0x0/0x72 [rt73]
[ 17.880016] [<c01044f3>] kernel_thread_helper+0x7/0x10
[ 17.880016] =======================
[ 17.880016] Code: 89 d8 6a 00 6a 00 8b 54 24 38 e8 49 f8 ff ff 8d 55 19 83
c4 30 f7 c6 01 00 00 00 0f 45 f2 0f b7 93 bc d2 01 00 89 f0 89 d1 31 d2 <f7> f1
8b 44 24 04 8d 4e 02 85 d2 0f 44 f1 89 70 0c 83 8b 00 e5
[ 17.880016] EIP: [<f8992ef1>] RTUSBMlmeHardTransmit+0x196/0x1b6 [rt73]
SS:ESP 0068:f7a9bed0
[ 17.889562] ---[ end trace c756012750c41d07 ]---
[ 18.864009] lp0: using parport0 (interrupt-driven).
[ 18.908007] ppdev: user-space parallel port driver
[ 21.220023] Clocksource tsc unstable (delta = -240233428 ns)
[ 24.360016] wlan0: no IPv6 routers present
[ 24.552029] eth0: no IPv6 routers present
[ 27.212840] nvidia: module license 'NVIDIA' taints kernel.
[ 27.468961] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 24 (level, low) ->
IRQ 24
[ 27.468978] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 27.469332] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun
4 23:43:17 PDT 2008
[ 27.472778] NVRM: API mismatch: the client has the version 177.82, but
[ 27.472782] NVRM: this kernel module has the version 173.14.09. Please
[ 27.472785] NVRM: make sure that this kernel module and all NVIDIA driver
[ 27.472788] NVRM: components have the same version.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: lang=de...@euro, lc_ctype=de...@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages rt73-modules-2.6.26-2-686 depends on:
ii linux-image-2.6.26-2-686 [lin 2.6.26-15 Linux 2.6.26 image on PPro/Celeron
rt73-modules-2.6.26-2-686 recommends no packages.
rt73-modules-2.6.26-2-686 suggests no packages.
-- no debconf information
--- End Message ---
signature.asc
