--- Begin Message ---
Package: runit-run
Version: 1.0.0
Severity: serious
User: [email protected]
Usertags: piuparts piuparts.d.o
Hi,
during a test with piuparts I noticed your package failed to install.
From the attached log (scroll to the bottom...):
Unpacking runit-run (from .../runit-run_1.0.0_all.deb) ...
This package diverts sysvinit's /sbin/init program. After the first
installation of the runit-run package, migrate essential services from
sysvinit to runit, so that these will get started after reboot. Then,
use
# /sbin/init.sysv 6
to reboot the system with runit as process no 1.
Please read the runit documentation before proceeding:
http://smarden.org/runit/
Press ENTER to continue, press Ctrl-C to abort... dpkg: error
processing /var/cache/apt/archives/runit-run_1.0.0_all.deb (--unpack):
subprocess new pre-installation script returned error exit status 1
Errors were encountered while processing:
/var/cache/apt/archives/runit-run_1.0.0_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
I understand what you are trying to do, but this is the wrong way.
Quoting: Policy 3.9.1 Prompting in maintainer scripts:
Package maintainer scripts may prompt the user if necessary. Prompting must
be done by communicating through a program, such as debconf, which conforms
to the Debian Configuration Management Specification, version 2 or higher.
regards,
Holger
Start: 2009-05-27 02:46:19 UTC
Package: runit-run
Priority: optional
Section: admin
Installed-Size: 180
Maintainer: Gerrit Pape <[email protected]>
Architecture: all
Version: 1.0.0
Replaces: daemontools-run
Depends: runit (>= 1.8.0-3), sysv-rc, initscripts
Recommends: fgetty
Filename: pool/main/r/runit-run/runit-run_1.0.0_all.deb
Size: 11250
MD5sum: c9c463b01fea1e65828bc0b5602335a4
SHA1: 37127b90fa09c6b6281109254735812a2937f2dc
SHA256: 192c205dda5f7314bb8023b1538f6d640f77c373a2a884c3a82db4e092ad7381
Description: a UNIX init scheme with service supervision
runit is a replacement for SysV-init and other init schemes. It runs on
Debian GNU/Linux, *BSD, MacOSX, and Solaris, and may be easily adapted
to other Unix operating systems. runit implements a simple three-stage
concept. Stage 1 performs the system's one-time initialization tasks.
Stage 2 starts the system's uptime services (via the runsvdir program).
Stage 3 handles the tasks necessary to shutdown and halt or reboot.
.
See http://smarden.org/runit/ for more information.
.
This package replaces the /sbin/init program and configures runit to run
as process no 1 after the next reboot.
Tag: admin::boot, interface::daemon, network::server, role::program
Executing: sudo /org/piuparts.debian.org/sbin/piuparts --no-symlinks --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad sid -b sid.tar.gz --mirror http://piatti.debian.org/debian/ runit-run
Guessed: debian
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile.
0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: piuparts version 0.36~20090526 starting up.
0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --no-symlinks --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad sid -b sid.tar.gz --mirror http://piatti.debian.org/debian/ runit-run
0m0.0s INFO: Running on: Linux piatti 2.6.29.4-dsa-amd64 #1 SMP Mon May 25 13:46:27 CEST 2009 x86_64
0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpu_NPvK
0m0.0s DEBUG: Unpacking sid.tar.gz into /org/piuparts.debian.org/tmp/tmpu_NPvK
0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpu_NPvK', '-zxf', 'sid.tar.gz']
0m3.2s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpu_NPvK', '-zxf', 'sid.tar.gz']
0m3.2s DEBUG: Created policy-rc.d and chmodded it.
0m3.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', 'update']
0m16.8s DUMP:
Get:1 http://piatti.debian.org sid Release.gpg [1032B]
Get:2 http://piatti.debian.org sid Release [94.4kB]
Ign http://piatti.debian.org sid/main Packages/DiffIndex
Ign http://piatti.debian.org sid/contrib Packages/DiffIndex
Ign http://piatti.debian.org sid/non-free Packages/DiffIndex
Get:3 http://piatti.debian.org sid/main Packages [7704kB]
Get:4 http://piatti.debian.org sid/contrib Packages [71.6kB]
Get:5 http://piatti.debian.org sid/non-free Packages [127kB]
Fetched 7999kB in 1s (7354kB/s)
Reading package lists...
0m16.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', 'update']
0m16.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'mount', '-t', 'proc', 'proc', '/proc']
0m16.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'mount', '-t', 'proc', 'proc', '/proc']
0m16.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', '-yf', 'upgrade']
0m22.2s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be upgraded:
debianutils dpkg gcc-4.4-base libc6 libgcc1 libncurses5 libstdc++6 login
ncurses-base ncurses-bin passwd sed
12 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 10.6MB of archives.
After this operation, 471kB disk space will be freed.
WARNING: The following packages cannot be authenticated!
debianutils dpkg login ncurses-bin sed gcc-4.4-base libgcc1 libstdc++6 libc6
libncurses5 ncurses-base passwd
Authentication warning overridden.
Get:1 http://piatti.debian.org sid/main debianutils 3.1.3 [48.7kB]
Get:2 http://piatti.debian.org sid/main dpkg 1.15.2 [2191kB]
Get:3 http://piatti.debian.org sid/main login 1:4.1.4.1-1 [758kB]
Get:4 http://piatti.debian.org sid/main ncurses-bin 5.7+20090523-1 [308kB]
Get:5 http://piatti.debian.org sid/main sed 4.2-1 [259kB]
Get:6 http://piatti.debian.org sid/main gcc-4.4-base 4.4.0-5 [108kB]
Get:7 http://piatti.debian.org sid/main libgcc1 1:4.4.0-5 [53.5kB]
Get:8 http://piatti.debian.org sid/main libstdc++6 4.4.0-5 [341kB]
Get:9 http://piatti.debian.org sid/main libc6 2.9-12 [4938kB]
Get:10 http://piatti.debian.org sid/main libncurses5 5.7+20090523-1 [356kB]
Get:11 http://piatti.debian.org sid/main ncurses-base 5.7+20090523-1 [180kB]
Get:12 http://piatti.debian.org sid/main passwd 1:4.1.4.1-1 [1047kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 10.6MB in 0s (46.7MB/s)
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5834 files and directories currently installed.)
Preparing to replace debianutils 3.1.2 (using .../debianutils_3.1.3_amd64.deb) ...
Unpacking replacement debianutils ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up debianutils (3.1.3) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5834 files and directories currently installed.)
Preparing to replace dpkg 1.14.26 (using .../archives/dpkg_1.15.2_amd64.deb) ...
Unpacking replacement dpkg ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up dpkg (1.15.2) ...
Installing new version of config file /etc/logrotate.d/dpkg ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5831 files and directories currently installed.)
Preparing to replace login 1:4.1.3.1-1 (using .../login_1%3a4.1.4.1-1_amd64.deb) ...
Unpacking replacement login ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up login (1:4.1.4.1-1) ...
Installing new version of config file /etc/login.defs ...
Installing new version of config file /etc/securetty ...
Installing new version of config file /etc/pam.d/login ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5830 files and directories currently installed.)
Preparing to replace ncurses-bin 5.7+20090425-1 (using .../ncurses-bin_5.7+20090523-1_amd64.deb) ...
Unpacking replacement ncurses-bin ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up ncurses-bin (5.7+20090523-1) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5830 files and directories currently installed.)
Preparing to replace sed 4.1.5-8 (using .../archives/sed_4.2-1_amd64.deb) ...
Unpacking replacement sed ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up sed (4.2-1) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5833 files and directories currently installed.)
Preparing to replace gcc-4.4-base 4.4.0-3 (using .../gcc-4.4-base_4.4.0-5_amd64.deb) ...
Unpacking replacement gcc-4.4-base ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up gcc-4.4-base (4.4.0-5) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5833 files and directories currently installed.)
Preparing to replace libgcc1 1:4.4.0-3 (using .../libgcc1_1%3a4.4.0-5_amd64.deb) ...
Unpacking replacement libgcc1 ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up libgcc1 (1:4.4.0-5) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5833 files and directories currently installed.)
Preparing to replace libstdc++6 4.4.0-3 (using .../libstdc++6_4.4.0-5_amd64.deb) ...
Unpacking replacement libstdc++6 ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up libstdc++6 (4.4.0-5) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5833 files and directories currently installed.)
Preparing to replace libc6 2.9-9 (using .../libc6_2.9-12_amd64.deb) ...
Unpacking replacement libc6 ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up libc6 (2.9-12) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5833 files and directories currently installed.)
Preparing to replace libncurses5 5.7+20090425-1 (using .../libncurses5_5.7+20090523-1_amd64.deb) ...
Unpacking replacement libncurses5 ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up libncurses5 (5.7+20090523-1) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5833 files and directories currently installed.)
Preparing to replace ncurses-base 5.7+20090502-1 (using .../ncurses-base_5.7+20090523-1_all.deb) ...
Unpacking replacement ncurses-base ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up ncurses-base (5.7+20090523-1) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
(Reading database ... 5833 files and directories currently installed.)
Preparing to replace passwd 1:4.1.3.1-1 (using .../passwd_1%3a4.1.4.1-1_amd64.deb) ...
Unpacking replacement passwd ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up passwd (1:4.1.4.1-1) ...
0m22.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', '-yf', 'upgrade']
0m22.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', 'install', 'debfoster']
0m23.1s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
debfoster
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 39.6kB of archives.
After this operation, 123kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
debfoster
Authentication warning overridden.
Get:1 http://piatti.debian.org sid/main debfoster 2.7-1 [39.6kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 39.6kB in 0s (0B/s)
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package debfoster.
(Reading database ... 5834 files and directories currently installed.)
Unpacking debfoster (from .../debfoster_2.7-1_amd64.deb) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up debfoster (2.7-1) ...
0m23.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', 'install', 'debfoster']
0m23.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'debfoster', '-o', 'MaxPriority=required', '-o', 'UseRecommends=no', '-f', '-n', 'apt', 'debfoster']
0m23.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'debfoster', '-o', 'MaxPriority=required', '-o', 'UseRecommends=no', '-f', '-n', 'apt', 'debfoster']
0m23.1s DEBUG: Removing /org/piuparts.debian.org/tmp/tmpu_NPvK/var/lib/debfoster/keepers
0m23.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'dpkg', '--purge', 'debfoster']
0m23.1s DUMP:
(Reading database ... 5848 files and directories currently installed.)
Removing debfoster ...
Purging configuration files for debfoster ...
0m23.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'dpkg', '--purge', 'debfoster']
0m23.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', 'clean']
0m23.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', 'clean']
0m23.1s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpu_NPvK/tmp/scripts/
0m23.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'dpkg', '--get-selections', '*']
0m23.8s DUMP:
adduser purge
apt install
apt-utils purge
aptitude purge
base-files install
base-passwd install
bash install
bsdmainutils purge
bsdutils install
coreutils install
cpio purge
cron purge
debconf install
debconf-i18n install
debfoster purge
debian-archive-keyring install
debianutils install
dhcp3-client purge
dhcp3-common purge
diff install
dmidecode purge
dpkg install
e2fslibs install
e2fsprogs install
ed purge
findutils install
gcc-4.2-base purge
gcc-4.3-base purge
gcc-4.4-base install
gnupg install
gpgv install
grep install
groff-base purge
gzip install
hostname install
ifupdown purge
info purge
initscripts install
iproute purge
iptables purge
iputils-ping purge
libacl1 install
libattr1 install
libblkid1 install
libbz2-1.0 install
libc6 install
libcomerr2 install
libconsole purge
libcwidget3 purge
libdb4.6 purge
libdb4.7 install
libdevmapper1.02.1 purge
libept0 purge
libgc1c2 install
libgcc1 install
libgcrypt11 purge
libgdbm3 purge
libgnutls26 purge
libgpg-error0 purge
liblocale-gettext-perl install
libncurses5 install
libncursesw5 purge
libnewt0.52 purge
libpam-modules install
libpam-runtime install
libpam0g install
libpopt0 purge
libreadline5 install
libsasl2-2 purge
libselinux1 install
libsepol1 install
libsigc++-2.0-0c2a purge
libslang2 install
libss2 install
libssl0.9.8 purge
libstdc++6 install
libtasn1-3 purge
libtext-charwidth-perl install
libtext-iconv-perl install
libtext-wrapi18n-perl install
libusb-0.1-4 install
libusb-1.0-0 purge
libuuid1 install
libvolume-id1 purge
libwrap0 purge
libxapian15 purge
login install
logrotate purge
lsb-base install
lzma install
makedev purge
man-db purge
manpages purge
mawk install
mktemp install
module-init-tools purge
mount install
nano purge
ncurses-base install
ncurses-bin install
net-tools purge
netbase purge
netcat-traditional purge
passwd install
perl-base install
procps purge
readline-common install
rsyslog purge
sed install
sensible-utils install
sysv-rc install
sysvinit install
sysvinit-utils install
tar install
tasksel purge
tasksel-data purge
tcpd purge
traceroute purge
tzdata install
udev purge
util-linux install
vim-common purge
vim-tiny purge
wget purge
whiptail purge
zlib1g install
0m23.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'dpkg', '--get-selections', '*']
0m23.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', '-y', 'install', 'runit-run']
0m25.2s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
libgc1c2
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
runit
Suggested packages:
socklog-run
Recommended packages:
fgetty
The following NEW packages will be installed:
runit runit-run
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 130kB of archives.
After this operation, 725kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
runit runit-run
Authentication warning overridden.
Get:1 http://piatti.debian.org sid/main runit 2.0.0-1 [119kB]
Get:2 http://piatti.debian.org sid/main runit-run 1.0.0 [11.2kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 130kB in 0s (250kB/s)
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package runit.
(Reading database ... 5834 files and directories currently installed.)
Unpacking runit (from .../runit_2.0.0-1_amd64.deb) ...
Selecting previously deselected package runit-run.
Unpacking runit-run (from .../runit-run_1.0.0_all.deb) ...
This package diverts sysvinit's /sbin/init program. After the first
installation of the runit-run package, migrate essential services from
sysvinit to runit, so that these will get started after reboot. Then,
use
# /sbin/init.sysv 6
to reboot the system with runit as process no 1.
Please read the runit documentation before proceeding:
http://smarden.org/runit/
Press ENTER to continue, press Ctrl-C to abort... dpkg: error processing /var/cache/apt/archives/runit-run_1.0.0_all.deb (--unpack):
subprocess new pre-installation script returned error exit status 1
Errors were encountered while processing:
/var/cache/apt/archives/runit-run_1.0.0_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m25.2s ERROR: Command failed (status=100): ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'apt-get', '-y', 'install', 'runit-run']
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
libgc1c2
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
runit
Suggested packages:
socklog-run
Recommended packages:
fgetty
The following NEW packages will be installed:
runit runit-run
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 130kB of archives.
After this operation, 725kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
runit runit-run
Authentication warning overridden.
Get:1 http://piatti.debian.org sid/main runit 2.0.0-1 [119kB]
Get:2 http://piatti.debian.org sid/main runit-run 1.0.0 [11.2kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 130kB in 0s (250kB/s)
Can not write log, openpty() failed (/dev/pts not mounted?)
Selecting previously deselected package runit.
(Reading database ... 5834 files and directories currently installed.)
Unpacking runit (from .../runit_2.0.0-1_amd64.deb) ...
Selecting previously deselected package runit-run.
Unpacking runit-run (from .../runit-run_1.0.0_all.deb) ...
This package diverts sysvinit's /sbin/init program. After the first
installation of the runit-run package, migrate essential services from
sysvinit to runit, so that these will get started after reboot. Then,
use
# /sbin/init.sysv 6
to reboot the system with runit as process no 1.
Please read the runit documentation before proceeding:
http://smarden.org/runit/
Press ENTER to continue, press Ctrl-C to abort... dpkg: error processing /var/cache/apt/archives/runit-run_1.0.0_all.deb (--unpack):
subprocess new pre-installation script returned error exit status 1
Errors were encountered while processing:
/var/cache/apt/archives/runit-run_1.0.0_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m25.2s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'umount', '/proc']
0m25.2s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpu_NPvK', 'umount', '/proc']
0m25.5s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpu_NPvK
End: 2009-05-27 02:46:44 UTC
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
