On 1/4/06, Stephen Gran <[EMAIL PROTECTED]> wrote:
> This one time, at band camp, Remigiusz ??wic said:
> > Package: hdparm
> > Version: 6.3-3
> > Severity: grave
>
> This seems a bit inflated to me - do you actually lose data, or is it
> just that you heard someone with similar error mesages lost data?
>
Ok, my mistake. Sorry.
> > During boot I see errors in dmesg. I've done little investigation
> > and found that is not problem with my hard drive, but only with
> > hdparm which is starting by udev.
> > Errors look like that and I find them only at start of udev:
> >
> > hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
> > ide: failed opcode was: unknown
> > hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete
> > DataRequest }
>
> This means that you asked hdparm to do something that the kernel and
> your hardware couldn't agree to do.
>
No way. When I manually apply my settings to hdparm every thing is ok.
> > When I comment out options of hdparm in /etc/hdparm.conf errors just
> > disappeared.
>
> Can you send me the output of lspci, the relevant ide detection lines from
> dmesg, uname -a output, and the contents of the hdparm.conf corresponding
> to hda?
>
lspci:
0000:00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
0000:00:00.1 System peripheral: Intel Corporation 82852/82855
GM/GME/PM/GMV Processor to I/O Controller (rev 02)
0000:00:00.3 System peripheral: Intel Corporation 82852/82855
GM/GME/PM/GMV Processor to I/O Controller (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corporation 82852/855GM
Integrated Graphics Device (rev 02)
0000:00:02.1 Display controller: Intel Corporation 82852/855GM
Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM
(ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
0000:00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC
Interface Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 03)
0000:00:1f.5 Multimedia audio controller: Intel Corporation
82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
0000:00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
0000:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:01:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
0000:01:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
0000:01:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
0000:01:05.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394
Controller (rev 04)
uname -a:
Linux ithaqua 2.6.14_dópa #1 Mon Dec 1 21:22:25 CET 2005 i686 GNU/Linux
dmesg:
Dec 4 19:43:53 ithaqua kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Dec 4 19:43:53 ithaqua kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
Dec 4 19:43:53 ithaqua kernel: ICH4: IDE controller at PCI slot 0000:00:1f.1
Dec 4 19:43:53 ithaqua kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Dec 4 19:43:53 ithaqua kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] ->
GSI 18 (level, low) -> IRQ 18
Dec 4 19:43:53 ithaqua kernel: ICH4: chipset revision 3
Dec 4 19:43:53 ithaqua kernel: ICH4: not 100%% native mode: will
probe irqs later
Dec 4 19:43:53 ithaqua kernel: ide0: BM-DMA at 0xffa0-0xffa7,
BIOS settings: hda:DMA, hdb:pio
Dec 4 19:43:53 ithaqua kernel: ide1: BM-DMA at 0xffa8-0xffaf,
BIOS settings: hdc:DMA, hdd:pio
Dec 4 19:43:53 ithaqua kernel: Probing IDE interface ide0...
Dec 4 19:43:53 ithaqua kernel: hda: IC25N040ATMR04-0, ATA DISK drive
Dec 4 19:43:53 ithaqua kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 4 19:43:53 ithaqua kernel: Probing IDE interface ide1...
Dec 4 19:43:53 ithaqua kernel: hdc: ASUS SCB-2424V, ATAPI CD/DVD-ROM drive
Dec 4 19:43:53 ithaqua kernel: ide1 at 0x170-0x177,0x376 on irq 15
Dec 4 19:43:53 ithaqua kernel: hda: max request size: 1024KiB
Dec 4 19:43:53 ithaqua kernel: hda: 78140160 sectors (40007 MB)
w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
Dec 4 19:43:53 ithaqua kernel: hda: cache flushes supported
Dec 4 19:43:53 ithaqua kernel: hda: hda1 hda3 < hda5 >
hdparm.conf:
/dev/hda {
mult_sect_io = 16
io32_support = 1
write_cache = on
dma = on
}
and
ithaqua:/home/remik# hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 16383/255/63, sectors = 78140160, start = 0
> > Can you look at this closer?
>
> Will do.
>
> Thanks for reporting,
>
Thanks for replay.
With regards,
Remigiusz Świc
