Control: severity -1 normal Control: tags -1 moreinfo
Am 03.02.20 um 19:27 schrieb Eric Valette: > > If I let eth0 in /etc/network/interface I get my eth0 card correctly > configured by ifplugd > each time using full duplex and 1000Mbps > > ethtool eth0 > Settings for eth0: > Supported ports: [ TP ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Full > Supported pause frame use: No > Supports auto-negotiation: Yes > Supported FEC modes: Not reported > Advertised link modes: 1000baseT/Full > Advertised pause frame use: No > Advertised auto-negotiation: Yes > Advertised FEC modes: Not reported > Speed: 1000Mb/s > Duplex: Full > Port: Twisted Pair > PHYAD: 1 > Transceiver: internal > Auto-negotiation: on > MDI-X: off (auto) > Supports Wake-on: pumbg > Wake-on: g > Current message level: 0x00000007 (7) > drv probe link > Link detected: yes > > If I let network manager handle this interface and either set "allow autoneg" > or disable > it and force speed at 1000 I get no working interafce it keeps trying to > configure > it in a loop. > > The only config that works is: > 1) disable autoneg > 2) and set speed at 100Mbps > > but this is not what I want and fisrt ethtool command shows the ethernet card > is capable > of what I want. Please provide a verbose debug log https://wiki.gnome.org/Projects/NetworkManager/Debugging
signature.asc
Description: OpenPGP digital signature
