--- Begin Message ---
Package: juilia
Version: 1.5.3+dfsg-3
Severity: important
X-Debbugs-Cc: [email protected]
Dear Maintainer,
juilia was found to fail to build during a test rebuild with libgit2 1.3.0 in
unstable
Relevant part (hopefully):
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
sbuild-build-depends-main-dummy : Depends: llvm-9-dev but it is not installable
E: Unable to correct problems, you have held broken packages.
apt-get failed.
E: Package installation failed
Not removing build depends: cloned chroot in use
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 5.16.0-6-amd64 (SMP w/8 CPU threads; PREEMPT)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_CRAP, TAINT_OOT_MODULE,
TAINT_UNSIGNED_MODULE
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
sbuild (Debian sbuild) 0.83.0 (05 February 2022) on debian
+==============================================================================+
| julia 1.5.3+dfsg-3 (amd64) Wed, 06 Apr 2022 08:51:22 +0000 |
+==============================================================================+
Package: julia
Version: 1.5.3+dfsg-3
Source Version: 1.5.3+dfsg-3
Distribution: unstable
Machine Architecture: amd64
Host Architecture: amd64
Build Architecture: amd64
Build Type: full
I: NOTICE: Log filtering will replace
'var/run/schroot/mount/unstable-amd64-sbuild-bd26d172-6b38-407b-b66d-27123951e203'
with '<<CHROOT>>'
I: NOTICE: Log filtering will replace 'build/julia-kXamdB/resolver-h1Vc4j' with
'<<RESOLVERDIR>>'
+------------------------------------------------------------------------------+
| Update chroot |
+------------------------------------------------------------------------------+
Get:1 file:/build/julia-kXamdB/resolver-4NgOWX/apt_archive ./ InRelease
Ign:1 file:/build/julia-kXamdB/resolver-4NgOWX/apt_archive ./ InRelease
Get:2 file:/build/julia-kXamdB/resolver-4NgOWX/apt_archive ./ Release [954 B]
Get:2 file:/build/julia-kXamdB/resolver-4NgOWX/apt_archive ./ Release [954 B]
Get:3 file:/build/julia-kXamdB/resolver-4NgOWX/apt_archive ./ Release.gpg
Ign:3 file:/build/julia-kXamdB/resolver-4NgOWX/apt_archive ./ Release.gpg
Get:4 file:/build/julia-kXamdB/resolver-4NgOWX/apt_archive ./ Packages [1243 B]
Err:4 file:/build/julia-kXamdB/resolver-4NgOWX/apt_archive ./ Packages
Could not open file
/build/julia-kXamdB/resolver-4NgOWX/apt_archive/./Packages - open (13:
Permission denied)
Get:4 file:/build/julia-kXamdB/resolver-4NgOWX/apt_archive ./ Packages [3269 B]
Get:5 http://ftp.us.debian.org/debian unstable InRelease [165 kB]
Get:6 http://deb.debian.org/debian experimental InRelease [75.4 kB]
Get:7 http://deb.debian.org/debian experimental/main amd64 Packages [394 kB]
Get:8 http://ftp.us.debian.org/debian unstable/main Sources.diff/Index [63.6 kB]
Get:9 http://ftp.us.debian.org/debian unstable/main amd64 Packages.diff/Index
[63.6 kB]
Get:10 http://ftp.us.debian.org/debian unstable/main Sources
T-2022-04-06-0204.07-F-2022-04-06-0204.07.pdiff [15.0 kB]
Get:10 http://ftp.us.debian.org/debian unstable/main Sources
T-2022-04-06-0204.07-F-2022-04-06-0204.07.pdiff [15.0 kB]
Get:11 http://ftp.us.debian.org/debian unstable/main amd64 Packages
T-2022-04-06-0204.07-F-2022-04-06-0204.07.pdiff [7531 B]
Get:11 http://ftp.us.debian.org/debian unstable/main amd64 Packages
T-2022-04-06-0204.07-F-2022-04-06-0204.07.pdiff [7531 B]
Fetched 784 kB in 4s (181 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+------------------------------------------------------------------------------+
| Fetch source files |
+------------------------------------------------------------------------------+
Local sources
-------------
/tmp/tmp.7fZ7QtUXb5/julia_1.5.3+dfsg-3.dsc exists in /tmp/tmp.7fZ7QtUXb5;
copying to chroot
I: NOTICE: Log filtering will replace 'build/julia-kXamdB/julia-1.5.3+dfsg'
with '<<PKGBUILDDIR>>'
I: NOTICE: Log filtering will replace 'build/julia-kXamdB' with '<<BUILDDIR>>'
+------------------------------------------------------------------------------+
| Install package build dependencies |
+------------------------------------------------------------------------------+
Setup apt archive
-----------------
Merged Build-Depends: curl, debhelper-compat (= 12), dpkg-dev (>= 1.16.2~),
libcurl4-gnutls-dev | libcurl-dev, libdsfmt-dev (>= 2.2.3), libgit2-dev (>=
0.27.0~), libgmp-dev, libmbedtls-dev, libmpfr-dev, libopenlibm-dev (>=
0.4.1+dfsg-4~), libpcre2-dev (>= 10.20-3~), libunwind8-dev, libutf8proc-dev (>=
2.1.1), llvm-9-dev, openssl, p7zip, python3-minimal, unicode-data, gfortran,
libblas-dev | libblas.so, liblapack-dev | liblapack.so, zlib1g-dev,
build-essential, fakeroot, fonts-lato, latexmk, python3-pkg-resources,
python3-pygments, texlive, texlive-extra-utils, texlive-fonts-extra,
texlive-latex-base, texlive-latex-extra, texlive-latex-recommended,
texlive-luatex, texlive-plain-generic
Filtered Build-Depends: curl, debhelper-compat (= 12), dpkg-dev (>= 1.16.2~),
libcurl4-gnutls-dev, libdsfmt-dev (>= 2.2.3), libgit2-dev (>= 0.27.0~),
libgmp-dev, libmbedtls-dev, libmpfr-dev, libopenlibm-dev (>= 0.4.1+dfsg-4~),
libpcre2-dev (>= 10.20-3~), libunwind8-dev, libutf8proc-dev (>= 2.1.1),
llvm-9-dev, openssl, p7zip, python3-minimal, unicode-data, gfortran,
libblas-dev, liblapack-dev, zlib1g-dev, build-essential, fakeroot, fonts-lato,
latexmk, python3-pkg-resources, python3-pygments, texlive, texlive-extra-utils,
texlive-fonts-extra, texlive-latex-base, texlive-latex-extra,
texlive-latex-recommended, texlive-luatex, texlive-plain-generic
dpkg-deb: building package 'sbuild-build-depends-main-dummy' in
'/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-main-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [963 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [711 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [712 B]
Fetched 2386 B in 0s (0 B/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ Release [954 B]
Get:2 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ Release [954 B]
Get:3 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ Release.gpg
Reading package lists...
Hit:1 http://deb.debian.org/debian experimental InRelease
Reading package lists...
Reading package lists...
Install main build dependencies (apt-based resolver)
----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
sbuild-build-depends-main-dummy : Depends: llvm-9-dev but it is not installable
E: Unable to correct problems, you have held broken packages.
apt-get failed.
E: Package installation failed
Not removing build depends: cloned chroot in use
Setup apt archive
-----------------
Merged Build-Depends: dose-distcheck
Filtered Build-Depends: dose-distcheck
dpkg-deb: building package 'sbuild-build-depends-dose3-dummy' in
'/<<RESOLVERDIR>>/apt_archive/sbuild-build-depends-dose3-dummy.deb'.
Ign:1 copy:/<<RESOLVERDIR>>/apt_archive ./ InRelease
Get:2 copy:/<<RESOLVERDIR>>/apt_archive ./ Release [963 B]
Ign:3 copy:/<<RESOLVERDIR>>/apt_archive ./ Release.gpg
Get:4 copy:/<<RESOLVERDIR>>/apt_archive ./ Sources [856 B]
Get:5 copy:/<<RESOLVERDIR>>/apt_archive ./ Packages [845 B]
Fetched 2664 B in 0s (264 kB/s)
Reading package lists...
Get:1 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ InRelease
Ign:1 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ InRelease
Get:2 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ Release [954 B]
Get:2 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ Release [954 B]
Get:3 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ Release.gpg
Ign:3 file:/<<BUILDDIR>>/resolver-4NgOWX/apt_archive ./ Release.gpg
Reading package lists...
Hit:1 http://deb.debian.org/debian experimental InRelease
Reading package lists...
Reading package lists...
Install dose3 build dependencies (apt-based resolver)
-----------------------------------------------------
Installing build dependencies
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
dose-distcheck
The following NEW packages will be installed:
dose-distcheck sbuild-build-depends-dose3-dummy
0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 1067 kB of archives.
After this operation, 4362 kB of additional disk space will be used.
Get:1 copy:/<<RESOLVERDIR>>/apt_archive ./ sbuild-build-depends-dose3-dummy
0.invalid.0 [848 B]
Get:2 http://ftp.us.debian.org/debian unstable/main amd64 dose-distcheck amd64
7.0.0-1+b1 [1066 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 1067 kB in 5s (217 kB/s)
Selecting previously unselected package dose-distcheck.
(Reading database ... 12573 files and directories currently installed.)
Preparing to unpack .../dose-distcheck_7.0.0-1+b1_amd64.deb ...
Unpacking dose-distcheck (7.0.0-1+b1) ...
Selecting previously unselected package sbuild-build-depends-dose3-dummy.
Preparing to unpack .../sbuild-build-depends-dose3-dummy_0.invalid.0_amd64.deb
...
Unpacking sbuild-build-depends-dose3-dummy (0.invalid.0) ...
Setting up dose-distcheck (7.0.0-1+b1) ...
Setting up sbuild-build-depends-dose3-dummy (0.invalid.0) ...
(I)Doseparse: Parsing and normalizing...
(I)Dose_deb: Parsing Packages file -...
(I)Dose_common: total packages 68930
(I)Dose_applications: Cudf Universe: 68930 packages
(I)Dose_applications: --checkonly specified, consider all packages as
background packages
(I)Dose_applications: Solving...
output-version: 1.2
native-architecture: amd64
report:
-
package: sbuild-build-depends-main-dummy
version: 0.invalid.0
architecture: amd64
status: broken
reasons:
-
missing:
pkg:
package: sbuild-build-depends-main-dummy
version: 0.invalid.0
architecture: amd64
unsat-dependency: llvm-9-dev:amd64
background-packages: 68929
foreground-packages: 1
total-packages: 68930
broken-packages: 1
+------------------------------------------------------------------------------+
| Cleanup |
+------------------------------------------------------------------------------+
Purging /<<BUILDDIR>>
Not cleaning session: cloned chroot in use
E: Package build dependencies not satisfied; skipping
+------------------------------------------------------------------------------+
| Summary |
+------------------------------------------------------------------------------+
Build Architecture: amd64
Build Type: full
Build-Space: n/a
Build-Time: 0
Distribution: unstable
Fail-Stage: install-deps
Host Architecture: amd64
Install-Time: 0
Job: /tmp/tmp.7fZ7QtUXb5/julia_1.5.3+dfsg-3.dsc
Machine Architecture: amd64
Package: julia
Package-Time: 0
Source-Version: 1.5.3+dfsg-3
Space: n/a
Status: given-back
Version: 1.5.3+dfsg-3
--------------------------------------------------------------------------------
Finished at 2022-04-06T08:51:22Z
Build needed 00:00:00, no disk space
--- End Message ---
