Your message dated Fri, 31 Mar 2023 12:34:00 +0000
with message-id <[email protected]>
and subject line Bug#1030595: fixed in dkms 3.0.10-8
has caused the Debian Bug report #1030595,
regarding dkms autoinstall fails if headers are not available but a module 
could be built
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
1030595: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1030595
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:linux
Version: 6.1.8-1
Severity: normal
X-Debbugs-Cc: [email protected]

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?
        trying to make an update
   * What exactly did you do (or not do) that was effective (or
     ineffective)?
        sudo apt update && sudo apt upgrade
   * What was the outcome of this action?
**********************************
Paramétrage de linux-image-6.1.0-3-amd64 (6.1.8-1) ...
I: /initrd.img is now a symlink to boot/initrd.img-6.1.0-3-amd64
/etc/kernel/postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-3-amd64:Sign command:
/lib/modules/6.1.0-3-amd64/build/scripts/sign-file
Binary /lib/modules/6.1.0-3-amd64/build/scripts/sign-file not found, modules
won't be signed
Error! Your kernel headers for kernel 6.1.0-3-amd64 cannot be found at
/lib/modules/6.1.0-3-amd64/build or /lib/modules/6.1.0-3-amd64/source.
Please install the linux-headers-6.1.0-3-amd64 package or use the
--kernelsourcedir option to tell DKMS where it's located.
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
 failed!
run-parts: /etc/kernel/postinst.d/dkms exited with return code 11
dpkg: erreur de traitement du paquet linux-image-6.1.0-3-amd64 (--configure) :
 installed linux-image-6.1.0-3-amd64 package post-installation script
subprocess returned error exit status 1
Paramétrage de linux-image-6.1.0-2-amd64 (6.1.7-1) ...
I: /initrd.img.old is now a symlink to boot/initrd.img-6.1.0-2-amd64
/etc/kernel/postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-2-amd64:Sign command:
/lib/modules/6.1.0-2-amd64/build/scripts/sign-file
Binary /lib/modules/6.1.0-2-amd64/build/scripts/sign-file not found, modules
won't be signed
Error! Your kernel headers for kernel 6.1.0-2-amd64 cannot be found at
/lib/modules/6.1.0-2-amd64/build or /lib/modules/6.1.0-2-amd64/source.
Please install the linux-headers-6.1.0-2-amd64 package or use the
--kernelsourcedir option to tell DKMS where it's located.
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
 failed!
run-parts: /etc/kernel/postinst.d/dkms exited with return code 11
dpkg: erreur de traitement du paquet linux-image-6.1.0-2-amd64 (--configure) :
 installed linux-image-6.1.0-2-amd64 package post-installation script
subprocess returned error exit status 1
dpkg: des problèmes de dépendances empêchent la configuration de linux-image-
amd64 :
 linux-image-amd64 dépend de linux-image-6.1.0-3-amd64 (= 6.1.8-1) ;
cependant :
 Le paquet linux-image-6.1.0-3-amd64 n'est pas encore configuré.

dpkg: erreur de traitement du paquet linux-image-amd64 (--configure) :
 problèmes de dépendances - laissé non configuré
Des erreurs ont été rencontrées pendant l'exécution :
 linux-image-6.1.0-3-amd64
 linux-image-6.1.0-2-amd64
 linux-image-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)

**********************************
   * What outcome did you expect instead?
        a proper installation and configuration
*** End of the template - remove these template lines ***


-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: Z370 AORUS Ultra Gaming
product_version: Default string
chassis_vendor: Default string
chassis_version: Default string
bios_vendor: American Megatrends Inc.
bios_version: F6
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z370 AORUS Ultra Gaming-CF
board_version: x.x

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 8th Gen Core Processor Host 
Bridge/DRAM Registers [8086:3ec2] (rev 07)
        Subsystem: Gigabyte Technology Co., Ltd 8th Gen Core Processor Host 
Bridge/DRAM Registers [1458:5000]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 0
        Capabilities: <access denied>
        Kernel driver in use: skl_uncore
        Kernel modules: ie31200_edac

00:01.0 PCI bridge [0604]: Intel Corporation 6th-10th Gen Core Processor PCIe 
Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 6th-10th Gen Core Processor 
PCIe Controller (x16) [1458:5000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 121
        IOMMU group: 1
        Bus: primary=00, secondary=01, subordinate=03, sec-latency=0
        I/O behind bridge: e000-efff [size=4K] [16-bit]
        Memory behind bridge: efa00000-efbfffff [size=2M] [32-bit]
        Prefetchable memory behind bridge: d0000000-e01fffff [size=258M] 
[32-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:08.0 System peripheral [0880]: Intel Corporation Xeon E3-1200 v5/v6 / 
E3-1500 v5 / 6th/7th/8th Gen Core Processor Gaussian Mixture Model [8086:1911]
        Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v5/v6 / E3-1500 v5 
/ 6th/7th/8th Gen Core Processor Gaussian Mixture Model [1458:5000]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 11
        IOMMU group: 2
        Region 0: Memory at eff4e000 (64-bit, non-prefetchable) [disabled] 
[size=4K]
        Capabilities: <access denied>

00:14.0 USB controller [0c03]: Intel Corporation 200 Series/Z370 Chipset Family 
USB 3.0 xHCI Controller [8086:a2af] (prog-if 30 [XHCI])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series/Z370 Chipset Family 
USB 3.0 xHCI Controller [1458:5007]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 135
        IOMMU group: 3
        Region 0: Memory at eff30000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation 200 Series PCH CSME 
HECI #1 [8086:a2ba]
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH CSME HECI 
[1458:1c3a]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 134
        IOMMU group: 4
        Region 0: Memory at eff4d000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: mei_me
        Kernel modules: mei_me

00:17.0 SATA controller [0106]: Intel Corporation 200 Series PCH SATA 
controller [AHCI mode] [8086:a282] (prog-if 01 [AHCI 1.0])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH SATA controller 
[AHCI mode] [1458:b005]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 136
        IOMMU group: 5
        Region 0: Memory at eff48000 (32-bit, non-prefetchable) [size=8K]
        Region 1: Memory at eff4c000 (32-bit, non-prefetchable) [size=256]
        Region 2: I/O ports at f050 [size=8]
        Region 3: I/O ports at f040 [size=4]
        Region 4: I/O ports at f020 [size=32]
        Region 5: Memory at eff4b000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1b.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #17 [8086:a2e7] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 122
        IOMMU group: 6
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1b.2 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #19 [8086:a2e9] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 123
        IOMMU group: 7
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: efe00000-efefffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1b.4 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #21 [8086:a2eb] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 124
        IOMMU group: 8
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: efd00000-efdfffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #1 [8086:a290] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 125
        IOMMU group: 9
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #3 [8086:a292] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 126
        IOMMU group: 10
        Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #5 [8086:a294] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 127
        IOMMU group: 11
        Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #6 [8086:a295] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 128
        IOMMU group: 12
        Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #7 [8086:a296] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 129
        IOMMU group: 13
        Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.7 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #8 [8086:a297] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin D routed to IRQ 130
        IOMMU group: 14
        Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: [disabled] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 PCI bridge [0604]: Intel Corporation 200 Series PCH PCI Express Root 
Port #9 [8086:a298] (rev f0) (prog-if 00 [Normal decode])
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH PCI Express Root 
Port [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 131
        IOMMU group: 15
        Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
        I/O behind bridge: [disabled] [16-bit]
        Memory behind bridge: efc00000-efcfffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: [disabled] [64-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1f.0 ISA bridge [0601]: Intel Corporation Z370 Chipset LPC/eSPI Controller 
[8086:a2c9]
        Subsystem: Gigabyte Technology Co., Ltd Z370 Chipset LPC/eSPI 
Controller [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 16

00:1f.2 Memory controller [0580]: Intel Corporation 200 Series/Z370 Chipset 
Family Power Management Controller [8086:a2a1]
        Subsystem: Gigabyte Technology Co., Ltd 200 Series/Z370 Chipset Family 
Power Management Controller [1458:5001]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        IOMMU group: 16
        Region 0: Memory at eff44000 (32-bit, non-prefetchable) [size=16K]

00:1f.3 Audio device [0403]: Intel Corporation 200 Series PCH HD Audio 
[8086:a2f0]
        Subsystem: Gigabyte Technology Co., Ltd 200 Series PCH HD Audio 
[1458:a182]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 32, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 137
        IOMMU group: 16
        Region 0: Memory at eff40000 (64-bit, non-prefetchable) [size=16K]
        Region 4: Memory at eff20000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

00:1f.4 SMBus [0c05]: Intel Corporation 200 Series/Z370 Chipset Family SMBus 
Controller [8086:a2a3]
        Subsystem: Gigabyte Technology Co., Ltd 200 Series/Z370 Chipset Family 
SMBus Controller [1458:5001]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        IOMMU group: 16
        Region 0: Memory at eff4a000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at f000 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c_i801

00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2) 
I219-V [8086:15b8]
        Subsystem: Gigabyte Technology Co., Ltd Ethernet Connection (2) I219-V 
[1458:e000]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 174
        IOMMU group: 17
        Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: e1000e
        Kernel modules: e1000e

01:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL 
Upstream Port of PCI Express Switch [1002:1478] (rev ca) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 132
        IOMMU group: 1
        Region 0: Memory at efb00000 (32-bit, non-prefetchable) [size=16K]
        Bus: primary=01, secondary=02, subordinate=03, sec-latency=0
        I/O behind bridge: e000-efff [size=4K] [16-bit]
        Memory behind bridge: efa00000-efafffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: d0000000-e01fffff [size=258M] 
[32-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

02:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL 
Downstream Port of PCI Express Switch [1002:1479] (prog-if 00 [Normal decode])
        Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL Downstream 
Port of PCI Express Switch [1002:1479]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 133
        IOMMU group: 1
        Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: e000-efff [size=4K] [16-bit]
        Memory behind bridge: efa00000-efafffff [size=1M] [32-bit]
        Prefetchable memory behind bridge: d0000000-e01fffff [size=258M] 
[32-bit]
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

03:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. 
[AMD/ATI] Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1002:731f] (rev 
ca) (prog-if 00 [VGA controller])
        Subsystem: Sapphire Technology Limited Navi 10 [Radeon RX 5600 OEM/5600 
XT / 5700/5700 XT] [1da2:e417]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 171
        IOMMU group: 1
        Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=2M]
        Region 4: I/O ports at e000 [size=256]
        Region 5: Memory at efa00000 (32-bit, non-prefetchable) [size=512K]
        Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: amdgpu
        Kernel modules: amdgpu

03:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 
HDMI Audio [1002:ab38]
        Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 HDMI Audio 
[1002:ab38]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 173
        IOMMU group: 1
        Region 0: Memory at efaa0000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd_hda_intel

05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM2142/ASM3142 USB 3.1 
Host Controller [1b21:2142] (prog-if 30 [XHCI])
        Subsystem: Gigabyte Technology Co., Ltd ASM2142/ASM3142 USB 3.1 Host 
Controller [1458:5007]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        IOMMU group: 18
        Region 0: Memory at efe00000 (64-bit, non-prefetchable) [size=32K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

06:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe 
SSD Controller SM981/PM981/PM983 [144d:a808] (prog-if 02 [NVM Express])
        Subsystem: Samsung Electronics Co Ltd SSD 970 EVO [144d:a801]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        NUMA node: 0
        IOMMU group: 19
        Region 0: Memory at efd00000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: nvme
        Kernel modules: nvme

0d:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe 
SSD Controller SM981/PM981/PM983 [144d:a808] (prog-if 02 [NVM Express])
        Subsystem: Samsung Electronics Co Ltd SSD 970 EVO [144d:a801]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        NUMA node: 0
        IOMMU group: 20
        Region 0: Memory at efc00000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: nvme
        Kernel modules: nvme


** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 152d:0578 JMicron Technology Corp. / JMicron USA 
Technology Corp. JMS578 SATA 6Gb/s
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 001 Device 006: ID 1a86:7523 QinHeng Electronics CH340 serial converter
Bus 001 Device 003: ID 33fa:0001  USB2.0-BT
Bus 001 Device 002: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 005: ID 046d:c542 Logitech, Inc. Wireless Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: bookworm/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 6.1.0-1-amd64 (SMP w/12 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.1.0-3-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.142
ii  kmod                                    30+20221128-1
ii  linux-base                              4.9

Versions of packages linux-image-6.1.0-3-amd64 recommends:
ii  apparmor             3.0.8-2+b1
ii  firmware-linux-free  20200122-1

Versions of packages linux-image-6.1.0-3-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi-amd64          2.06-7
pn  linux-doc-6.1           <none>

Versions of packages linux-image-6.1.0-3-amd64 is related to:
ii  firmware-amd-graphics     20221214-5
ii  firmware-atheros          20221214-5
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
ii  firmware-linux-nonfree    20221214-5
ii  firmware-misc-nonfree     20221214-5
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
ii  firmware-realtek          20221214-5
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

--- End Message ---
--- Begin Message ---
Source: dkms
Source-Version: 3.0.10-8
Done: Andreas Beckmann <[email protected]>

We believe that the bug you reported is fixed in the latest version of
dkms, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Andreas Beckmann <[email protected]> (supplier of updated dkms package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Fri, 31 Mar 2023 14:01:26 +0200
Source: dkms
Architecture: source
Version: 3.0.10-8
Distribution: unstable
Urgency: medium
Maintainer: Dynamic Kernel Module System Team <[email protected]>
Changed-By: Andreas Beckmann <[email protected]>
Closes: 651973 704917 717584 810665 968074 1019563 1030595 1033396
Changes:
 dkms (3.0.10-8) unstable; urgency=medium
 .
   * Disable tests broken by fix-builtin-archive-dkms-coinstallation.patch.
     (Closes: #1033396)
   * Run autopkgtest for all architectures using the headers from the
     linux-headers-generic (virtual) meta-package.
   * Generate dh_dkms.1 at build time.
   * Clean up /boot/*.old-dkms on upgrades from bullseye.  (Closes: #717584)
   * Clean up obsolete /etc/dkms/sign_helper.sh on upgrades. (Closes: #1019563)
   * dkms-autopkgtest: Try to 'dkms install' its BUILD_DEPENDS before testing a
     module. (Single level only, without recursion.)
   * Fix fallback value for BUILD_MODULE_NAME[0].  (Closes: #651973)
   * dkms.8: Clarify 'dkms add' arguments.  (Closes: #704917)
   * Print a warning if /proc is not mounted.  (Closes: #810665, #968074)
   * dkms_autoinstaller: Skip autoinstall if headers are missing (like
     dkms_common.postinst).  (Closes: #1030595)
   * Use return code 77 if skipping due to BUILD_EXCLUSIVE_*.
   * Sort kernels by version.
Checksums-Sha1:
 b07e3811c2659e43e292377e70c59299997352cb 2148 dkms_3.0.10-8.dsc
 d3babebb01e12746bacddfe4bcb1c07fcc7904f5 26032 dkms_3.0.10-8.debian.tar.xz
 a5ea151542a10f1f778091d193f584a1f6a792ae 5521 dkms_3.0.10-8_source.buildinfo
Checksums-Sha256:
 f255151b9ae2b3c4757e69d721780b5b9e27bc24d8c085345f061fb9f997d82a 2148 
dkms_3.0.10-8.dsc
 4d67e51dc59c5439752a0f4c8ddd2f3ebebe5631f7b0f1d4c59b86ccc0812b9b 26032 
dkms_3.0.10-8.debian.tar.xz
 d890fa8843500a8c4a4099841a1e1e0193bdc0eaad97d4a6b7128c4a9430009c 5521 
dkms_3.0.10-8_source.buildinfo
Files:
 dd32870de25cef7dc17690287d91c126 2148 kernel optional dkms_3.0.10-8.dsc
 b1262552c2e4cb131f71e773cd306e29 26032 kernel optional 
dkms_3.0.10-8.debian.tar.xz
 da5fef6cbbdad13888ad6ffeb4af239f 5521 kernel optional 
dkms_3.0.10-8_source.buildinfo

-----BEGIN PGP SIGNATURE-----
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=xybm
-----END PGP SIGNATURE-----

--- End Message ---

Reply via email to