Your message dated Sun, 07 Sep 2025 14:40:00 +0000
with message-id <[email protected]>
and subject line Bug#1097172: fixed in libcommonmark-perl 0.310100-2
has caused the Debian Bug report #1097172,
regarding libcommonmark-perl: ftbfs with GCC-15
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1097172: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1097172
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: src:libcommonmark-perl
Version: 0.310100-1
Severity: important
Tags: sid forky
User: [email protected]
Usertags: ftbfs-gcc-15
[This bug is NOT targeted to the upcoming trixie release]
Please keep this issue open in the bug tracker for the package it
was filed for. If a fix in another package is required, please
file a bug for the other package (or clone), and add a block in this
package. Please keep the issue open until the package can be built in
a follow-up test rebuild.
The package fails to build in a test rebuild on at least amd64 with
gcc-15/g++-15, but succeeds to build with gcc-14/g++-14. The
severity of this report will be raised before the forky release.
The full build log can be found at:
http://qa-logs.debian.net/2025/02/16/amd64exp/libcommonmark-perl_0.310100-1_unstable_gccexp.log.gz
The last lines of the build log are at the end of this report.
To build with GCC 15, either set CC=gcc-15 CXX=g++-15 explicitly,
or install the gcc, g++, gfortran, ... packages from experimental.
apt-get -t=experimental install g++
GCC 15 now defaults to the C23/C++23 standards, exposing many FTBFS.
Other Common build failures are new warnings resulting in build failures
with -Werror turned on, or new/dropped symbols in Debian symbols files.
For other C/C++ related build failures see the porting guide at
http://gcc.gnu.org/gcc-15/porting_to.html
[...]
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by gregor herrmann <[email protected]>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture amd64
debian/rules clean
dh clean
dh_clean
debian/rules binary
dh binary
dh_update_autotools_config
dh_autoreconf
dh_auto_configure
/usr/bin/perl Makefile.PL INSTALLDIRS=vendor "OPTIMIZE=-g -O2
-Werror=implicit-function-declaration
-ffile-prefix-map=/build/reproducible-path/libcommonmark-perl-0.310100=.
-fstack-protector-strong -fstack-clash-protection -Wformat
-Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2"
"LD=x86_64-linux-gnu-gcc -g -O2 -Werror=implicit-function-declaration
-ffile-prefix-map=/build/reproducible-path/libcommonmark-perl-0.310100=.
-fstack-protector-strong -fstack-clash-protection -Wformat
-Werror=format-security -fcf-protection -Wl,-z,relro -Wl,-z,now"
WARNING: Older versions of ExtUtils::MakeMaker may errantly install README.pod
as part of this distribution. It is recommended to avoid using this path in
CPAN modules.
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for CommonMark
Writing MYMETA.yml and MYMETA.json
dh_auto_build
make -j8
make[1]: Entering directory
'/build/reproducible-path/libcommonmark-perl-0.310100'
Running Mkbootstrap for CommonMark ()
"/usr/bin/perl" "/usr/share/perl/5.40/ExtUtils/xsubpp" -typemap
'/usr/share/perl/5.40/ExtUtils/typemap' -typemap
'/build/reproducible-path/libcommonmark-perl-0.310100/typemap' CommonMark.xs >
CommonMark.xsc
chmod 644 "CommonMark.bs"
"/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- CommonMark.bs
blib/arch/auto/CommonMark/CommonMark.bs 644
cp lib/CommonMark.pod blib/lib/CommonMark.pod
cp lib/CommonMark.pm blib/lib/CommonMark.pm
cp lib/CommonMark/Parser.pod blib/lib/CommonMark/Parser.pod
cp lib/CommonMark/Node.pod blib/lib/CommonMark/Node.pod
cp lib/CommonMark/Iterator.pod blib/lib/CommonMark/Iterator.pod
mv CommonMark.xsc CommonMark.c
x86_64-linux-gnu-gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -g -O2 -Werror=implicit-function-declaration
-ffile-prefix-map=/build/reproducible-path/libcommonmark-perl-0.310100=.
-fstack-protector-strong -fstack-clash-protection -Wformat
-Werror=format-security -fcf-protection -Wdate-time -D_FORTIFY_SOURCE=2
-DVERSION=\"0.310100\" -DXS_VERSION=\"0.310100\" -fPIC
"-I/usr/lib/x86_64-linux-gnu/perl/5.40/CORE" CommonMark.c
CommonMark.c: In function ‘XS_CommonMark__Node_interface_get_node’:
CommonMark.c:675:18: error: too many arguments to function ‘XSFUNCTION’;
expected 0, have 1
675 | RETVAL = XSFUNCTION(node);
| ^~~~~~~~~~ ~~~~
CommonMark.c: In function ‘XS_CommonMark__Node_interface_get_int’:
CommonMark.c:701:18: error: too many arguments to function ‘XSFUNCTION’;
expected 0, have 1
701 | RETVAL = XSFUNCTION(node);
| ^~~~~~~~~~ ~~~~
CommonMark.c: In function ‘XS_CommonMark__Node_interface_set_int’:
CommonMark.c:729:18: error: too many arguments to function ‘XSFUNCTION’;
expected 0, have 2
729 | RETVAL = XSFUNCTION(node, value);
| ^~~~~~~~~~ ~~~~
CommonMark.c: In function ‘XS_CommonMark__Node_interface_get_utf8’:
CommonMark.c:754:18: error: too many arguments to function ‘XSFUNCTION’;
expected 0, have 1
754 | RETVAL = XSFUNCTION(node);
| ^~~~~~~~~~ ~~~~
CommonMark.c: In function ‘XS_CommonMark__Node_interface_set_utf8’:
CommonMark.c:783:18: error: too many arguments to function ‘XSFUNCTION’;
expected 0, have 2
783 | RETVAL = XSFUNCTION(node, value);
| ^~~~~~~~~~ ~~~~
CommonMark.c: In function ‘XS_CommonMark__Node_interface_move_node’:
CommonMark.c:882:18: error: too many arguments to function ‘XSFUNCTION’;
expected 0, have 2
882 | RETVAL = XSFUNCTION(node, other);
| ^~~~~~~~~~ ~~~~
CommonMark.c: In function ‘XS_CommonMark__Node_interface_render’:
CommonMark.c:920:18: error: too many arguments to function ‘XSFUNCTION’;
expected 0, have 2
920 | RETVAL = XSFUNCTION(root, options);
| ^~~~~~~~~~ ~~~~
CommonMark.c: In function ‘XS_CommonMark__Node_interface_render_width’:
CommonMark.c:966:18: error: too many arguments to function ‘XSFUNCTION’;
expected 0, have 3
966 | RETVAL = XSFUNCTION(root, options, width);
| ^~~~~~~~~~ ~~~~
make[1]: *** [Makefile:348: CommonMark.o] Error 1
make[1]: Leaving directory
'/build/reproducible-path/libcommonmark-perl-0.310100'
dh_auto_build: error: make -j8 returned exit code 2
make: *** [debian/rules:6: binary] Error 25
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
--- End Message ---
--- Begin Message ---
Source: libcommonmark-perl
Source-Version: 0.310100-2
Done: gregor herrmann <[email protected]>
We believe that the bug you reported is fixed in the latest version of
libcommonmark-perl, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
gregor herrmann <[email protected]> (supplier of updated libcommonmark-perl
package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Sun, 07 Sep 2025 15:34:15 +0200
Source: libcommonmark-perl
Architecture: source
Version: 0.310100-2
Distribution: unstable
Urgency: medium
Maintainer: Debian Perl Group <[email protected]>
Changed-By: gregor herrmann <[email protected]>
Closes: 1097172
Changes:
libcommonmark-perl (0.310100-2) unstable; urgency=medium
.
* Team upload.
* Build with -std=gnu17. (Closes: #1097172)
* Declare compliance with Debian Policy 4.7.2.
* Remove «Rules-Requires-Root: no», which is the current default.
* Remove «Priority: optional», which is the current default.
Checksums-Sha1:
7f842e1170f52cfc214ec07345eea4a325e1338b 2462 libcommonmark-perl_0.310100-2.dsc
1fcaeadb592dd6191d0956c54d5ffc3a591936ec 2072
libcommonmark-perl_0.310100-2.debian.tar.xz
Checksums-Sha256:
b99a19639f14188aced7cf63b879f5dc8e199e13229d0f358f3b5daed752473b 2462
libcommonmark-perl_0.310100-2.dsc
77454b8e80b6f574da5d90750cc6db3e3961d938efcbd81a60a7e907dadb0f91 2072
libcommonmark-perl_0.310100-2.debian.tar.xz
Files:
51e47af504035267e1ea9854781a1daf 2462 perl optional
libcommonmark-perl_0.310100-2.dsc
01bbf93c03e5e10c2365955ff5e8fe2c 2072 perl optional
libcommonmark-perl_0.310100-2.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=3stx
-----END PGP SIGNATURE-----
pgpkH4YablAQ7.pgp
Description: PGP signature
--- End Message ---
