Your message dated Sun, 26 Oct 2025 19:51:23 +0000
with message-id <[email protected]>
and subject line Bug#1113188: fixed in libpolyclipping 6.4.2-9
has caused the Debian Bug report #1113188,
regarding libpolyclipping: FTBFS with CMake 4
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
1113188: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1113188
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Source: libpolyclipping
Version: 6.4.2-8
Severity: serious
User: [email protected]
Usertags: cmake-4
Tags: ftbfs, forky, sid
Dear maintainer,
During a test rebuild for CMake 4, libpolyclipping failed to rebuild.
Log Summary:
-------------------------------------------------------------------------------
[...]
9ed45a6037772f3311d534adeacd667a 5040 libpolyclipping_6.4.2-8.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=EpB/
-----END PGP SIGNATURE-----
dpkg-source: warning: cannot verify inline signature for
./libpolyclipping_6.4.2-8.dsc: no acceptable signature found
dpkg-source: info: extracting libpolyclipping in
/build/reproducible-path/libpolyclipping-6.4.2
dpkg-source: info: unpacking libpolyclipping_6.4.2.orig.tar.bz2
dpkg-source: info: unpacking libpolyclipping_6.4.2-8.debian.tar.xz
dpkg-source: info: using patch list from debian/patches/series
dpkg-source: info: applying 1000-fix-multiarch-paths.patch
Check disk space
----------------
Sufficient free space for build
User Environment
----------------
APT_CONFIG=/var/lib/sbuild/apt.conf
HOME=/sbuild-nonexistent
LANG=C.UTF-8
LC_ALL=C.UTF-8
LOGNAME=sbuild
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
SHELL=/bin/sh
USER=sbuild
dpkg-buildpackage
-----------------
Command: dpkg-buildpackage --sanitize-env -us -uc -b
dpkg-buildpackage: info: source package libpolyclipping
dpkg-buildpackage: info: source version 6.4.2-8
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by Petter Reinholdtsen <[email protected]>
dpkg-source --before-build .
dpkg-buildpackage: info: host architecture arm64
debian/rules clean
dh clean --buildsystem=cmake --sourcedirectory=cpp
dh_auto_clean -O--buildsystem=cmake -O--sourcedirectory=cpp
dh_autoreconf_clean -O--buildsystem=cmake -O--sourcedirectory=cpp
dh_clean -O--buildsystem=cmake -O--sourcedirectory=cpp
rm -f debian/debhelper-build-stamp
rm -rf debian/.debhelper/
rm -f -- debian/libpolyclipping22.substvars
debian/libpolyclipping-dev.substvars debian/files
rm -fr -- debian/libpolyclipping22/ debian/tmp/
debian/libpolyclipping-dev/
find . \( \( \
\( -path .\*/.git -o -path .\*/.svn -o -path .\*/.bzr -o -path
.\*/.hg -o -path .\*/CVS -o -path .\*/.pc -o -path .\*/_darcs \) -prune -o
-type f -a \
\( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \
-o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \
-o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \
-o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \
\) -exec rm -f {} + \) -o \
\( -type d -a \( -name autom4te.cache -o -name __pycache__ \)
-prune -exec rm -rf {} + \) \)
debian/rules binary
dh binary --buildsystem=cmake --sourcedirectory=cpp
dh_update_autotools_config -O--buildsystem=cmake -O--sourcedirectory=cpp
dh_autoreconf -O--buildsystem=cmake -O--sourcedirectory=cpp
dh_auto_configure -O--buildsystem=cmake -O--sourcedirectory=cpp
cd obj-aarch64-linux-gnu && DEB_PYTHON_INSTALL_LAYOUT=deb
PKG_CONFIG=/usr/bin/pkg-config cmake -DCMAKE_INSTALL_PREFIX=/usr
-DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc
-DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON
-DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF
-DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON
-DFETCHCONTENT_FULLY_DISCONNECTED=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run
-DCMAKE_SKIP_INSTALL_ALL_DEPENDENCY=ON "-GUnix Makefiles"
-DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_LIBDIR=lib/aarch64-linux-gnu ../cpp
CMake Error at CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED):
Compatibility with CMake < 3.5 has been removed from CMake.
Update the VERSION argument <min> value. Or, use the <min>...<max> syntax
to tell CMake that the project requires at least <min> but has been updated
to work with policies introduced by <max> or earlier.
Or, add -DCMAKE_POLICY_VERSION_MINIMUM=3.5 to try configuring anyway.
-- Configuring incomplete, errors occurred!
cd obj-aarch64-linux-gnu && tail -v -n \+0 CMakeCache.txt
==> CMakeCache.txt <==
# This is the CMakeCache file.
# For build in directory:
/build/reproducible-path/libpolyclipping-6.4.2/obj-aarch64-linux-gnu
# It was generated by CMake: /usr/bin/cmake
# You can edit this file to change values found and used by cmake.
# If you do not want to change any of the values, simply exit the editor.
# If you do want to change a value, simply edit, save, and exit the editor.
# The syntax for the file is as follows:
# KEY:TYPE=VALUE
# KEY is the name of a variable in the cache.
# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!.
# VALUE is the current value for the KEY.
########################
# EXTERNAL cache entries
########################
//No help, variable specified on the command line.
CMAKE_BUILD_TYPE:UNINITIALIZED=None
//No help, variable specified on the command line.
CMAKE_EXPORT_NO_PACKAGE_REGISTRY:UNINITIALIZED=ON
//No help, variable specified on the command line.
CMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY:UNINITIALIZED=ON
//Value Computed by CMake.
CMAKE_FIND_PACKAGE_REDIRECTS_DIR:STATIC=/build/reproducible-path/libpolyclipping-6.4.2/obj-aarch64-linux-gnu/CMakeFiles/pkgRedirects
//No help, variable specified on the command line.
CMAKE_FIND_USE_PACKAGE_REGISTRY:UNINITIALIZED=OFF
//No help, variable specified on the command line.
CMAKE_INSTALL_LIBDIR:UNINITIALIZED=lib/aarch64-linux-gnu
//No help, variable specified on the command line.
CMAKE_INSTALL_LOCALSTATEDIR:UNINITIALIZED=/var
//No help, variable specified on the command line.
CMAKE_INSTALL_PREFIX:UNINITIALIZED=/usr
//No help, variable specified on the command line.
CMAKE_INSTALL_RUNSTATEDIR:UNINITIALIZED=/run
//No help, variable specified on the command line.
CMAKE_INSTALL_SYSCONFDIR:UNINITIALIZED=/etc
//No help, variable specified on the command line.
CMAKE_SKIP_INSTALL_ALL_DEPENDENCY:UNINITIALIZED=ON
//No help, variable specified on the command line.
CMAKE_VERBOSE_MAKEFILE:UNINITIALIZED=ON
//No help, variable specified on the command line.
FETCHCONTENT_FULLY_DISCONNECTED:UNINITIALIZED=ON
########################
# INTERNAL cache entries
########################
//This is the directory where this CMakeCache.txt was created
CMAKE_CACHEFILE_DIR:INTERNAL=/build/reproducible-path/libpolyclipping-6.4.2/obj-aarch64-linux-gnu
//Major version of cmake used to create the current loaded cache
CMAKE_CACHE_MAJOR_VERSION:INTERNAL=4
//Minor version of cmake used to create the current loaded cache
CMAKE_CACHE_MINOR_VERSION:INTERNAL=1
//Patch version of cmake used to create the current loaded cache
CMAKE_CACHE_PATCH_VERSION:INTERNAL=1
//Path to CMake executable.
CMAKE_COMMAND:INTERNAL=/usr/bin/cmake
//Path to cpack program executable.
CMAKE_CPACK_COMMAND:INTERNAL=/usr/bin/cpack
//Path to ctest program executable.
CMAKE_CTEST_COMMAND:INTERNAL=/usr/bin/ctest
//Name of external makefile project generator.
CMAKE_EXTRA_GENERATOR:INTERNAL=
//Name of generator.
CMAKE_GENERATOR:INTERNAL=Unix Makefiles
//Generator instance identifier.
CMAKE_GENERATOR_INSTANCE:INTERNAL=
//Name of generator platform.
CMAKE_GENERATOR_PLATFORM:INTERNAL=
//Name of generator toolset.
CMAKE_GENERATOR_TOOLSET:INTERNAL=
//Source directory with the top level CMakeLists.txt file for this
// project
CMAKE_HOME_DIRECTORY:INTERNAL=/build/reproducible-path/libpolyclipping-6.4.2/cpp
//Name of CMakeLists files to read
CMAKE_LIST_FILE_NAME:INTERNAL=CMakeLists.txt
//number of local generators
CMAKE_NUMBER_OF_MAKEFILES:INTERNAL=1
//Path to CMake installation.
CMAKE_ROOT:INTERNAL=/usr/share/cmake-4.1
dh_auto_configure: error: cd obj-aarch64-linux-gnu &&
DEB_PYTHON_INSTALL_LAYOUT=deb PKG_CONFIG=/usr/bin/pkg-config cmake
-DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None
-DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var
-DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF
-DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON
-DFETCHCONTENT_FULLY_DISCONNECTED=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run
-DCMAKE_SKIP_INSTALL_ALL_DEPENDENCY=ON "-GUnix Makefiles"
-DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_INSTALL_LIBDIR=lib/aarch64-linux-gnu ../cpp
returned exit code 1
make: *** [debian/rules:24: binary] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
--------------------------------------------------------------------------------
Build finished at 2025-08-30T04:21:47Z
-------------------------------------------------------------------------------
The above is just how the build ends and not necessarily the most relevant part.
If required, the full build log is available here (for the next 30 days):
https://debusine.debian.net/artifact/2401959/
The most likely cause of build failures is the removed backwards compatibility
for
CMake versions earlier than 3.5. You can find additional information in my
debian-devel announcement:
https://lists.debian.org/debian-devel/2025/04/msg00310.html
About the archive rebuild: The build was made on debusine.debian.net,
using sbuild.
You can find the build task here:
https://debusine.debian.net/work-request/153857/
If this is really a bug in one of the build-depends, please use
reassign and affects, so that this is still visible in the BTS web
page for this package.
Thanks,
Timo
--- End Message ---
--- Begin Message ---
Source: libpolyclipping
Source-Version: 6.4.2-9
Done: Christoph Berg <[email protected]>
We believe that the bug you reported is fixed in the latest version of
libpolyclipping, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Christoph Berg <[email protected]> (supplier of updated libpolyclipping package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Sun, 26 Oct 2025 20:45:52 +0100
Source: libpolyclipping
Architecture: source
Version: 6.4.2-9
Distribution: unstable
Urgency: medium
Maintainer: Debian 3-D Printing Packages
<[email protected]>
Changed-By: Christoph Berg <[email protected]>
Closes: 1113188
Changes:
libpolyclipping (6.4.2-9) unstable; urgency=medium
.
* Fix compatibility with cmake 4. (Closes: #1113188)
Checksums-Sha1:
18ddf9364dc90cf1a945e5e005b026d47c6e50f3 2166 libpolyclipping_6.4.2-9.dsc
6b9d7c57549aed780853e790c60d4deda01df729 5104
libpolyclipping_6.4.2-9.debian.tar.xz
Checksums-Sha256:
8e855133d3a60c978eeed062fcb8e0b8c0df6db0f904aace353267eb68a62534 2166
libpolyclipping_6.4.2-9.dsc
70b6d011c518435eee012a00e6888ccb245f6cf5949f4d22ccc79aabf072ed3b 5104
libpolyclipping_6.4.2-9.debian.tar.xz
Files:
0ecf8c3f8f3de24b58ca0fbff6ae25fa 2166 libs optional libpolyclipping_6.4.2-9.dsc
13af38a8c63e5187ececebf4e041fec6 5104 libs optional
libpolyclipping_6.4.2-9.debian.tar.xz
-----BEGIN PGP SIGNATURE-----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=0KMq
-----END PGP SIGNATURE-----
pgpiq1ve05O1B.pgp
Description: PGP signature
--- End Message ---
