Package: src:python-fluids Version: 1.0.27-1 Severity: serious Tags: ftbfs forky sid
Dear maintainer: During a rebuild of all packages in unstable, this package failed to build. Below you will find the last part of the build log (probably the most relevant part, but not necessarily). If required, the full build log is available here: https://people.debian.org/~sanvila/build-logs/202512/ About the archive rebuild: The build was made on virtual machines from AWS, using sbuild and a reduced chroot with only build-essential packages. If you cannot reproduce the bug please contact me privately, as I am willing to provide ssh access to a virtual machine where the bug is fully reproducible. If this is really a bug in one of the build-depends, please use reassign and add an affects on src:python-fluids, so that this is still visible in the BTS web page for this package. Thanks. -------------------------------------------------------------------------------- [...] debian/rules clean dh clean --with python3,sphinxdoc --buildsystem=pybuild --test-pytest dh_auto_clean -O--buildsystem=pybuild -O--test-pytest I: pybuild base:317: python3.14 setup.py clean /usr/lib/python3/dist-packages/setuptools/dist.py:759: SetuptoolsDeprecationWarning: License classifiers are deprecated. !! ******************************************************************************** Please consider removing the following classifiers in favor of a SPDX license expression: License :: OSI Approved :: MIT License See https://packaging.python.org/en/latest/guides/writing-pyproject-toml/#license for details. ******************************************************************************** [... snipped ...] copying notebooks ... [ 72%] Examples/Crane TP 410 Solved Problems/7.32 NPSH Available Calculation.ipynb copying notebooks ... [ 74%] Examples/Crane TP 410 Solved Problems/7.33 Pump Affinity Rules.ipynb copying notebooks ... [ 77%] Examples/Crane TP 410 Solved Problems/7.34 Pump Power and Operating Cost.ipynb copying notebooks ... [ 79%] Examples/Crane TP 410 Solved Problems/7.35 Hydraulic Resistance of a Converging Tee.ipynb copying notebooks ... [ 82%] Examples/Crane TP 410 Solved Problems/7.36 Hydraulic Resistance of a Diverging Wye.ipynb copying notebooks ... [ 85%] Examples/Crane TP 410 Solved Problems/7.4 Venturi Type Valves.ipynb copying notebooks ... [ 87%] Examples/Crane TP 410 Solved Problems/7.5 Lift Check Valves.ipynb copying notebooks ... [ 90%] Examples/Crane TP 410 Solved Problems/7.6 Reduced Port Ball Valve.ipynb copying notebooks ... [ 92%] Examples/Crane TP 410 Solved Problems/7.7 Laminar flow in Valves, Fittings, and Pipe - System from Example 7.6.ipynb copying notebooks ... [ 95%] Examples/Crane TP 410 Solved Problems/7.8 Laminar flow in Valves, Fittings, and Pipe - SAE oil through a pipe and globe valve.ipynb copying notebooks ... [ 97%] Examples/Crane TP 410 Solved Problems/7.9 Laminar Flow in Valves, Fittings, and Pipe.ipynb copying notebooks ... [100%] Samples/Tank.ipynb highlighting module code... [ 4%] fluids.atmosphere highlighting module code... [ 9%] fluids.compressible highlighting module code... [ 13%] fluids.control_valve highlighting module code... [ 17%] fluids.core highlighting module code... [ 22%] fluids.drag highlighting module code... [ 26%] fluids.filters highlighting module code... [ 30%] fluids.fittings highlighting module code... [ 35%] fluids.flow_meter highlighting module code... [ 39%] fluids.friction highlighting module code... [ 43%] fluids.geometry highlighting module code... [ 48%] fluids.jet_pump highlighting module code... [ 52%] fluids.mixing highlighting module code... [ 57%] fluids.open_flow highlighting module code... [ 61%] fluids.packed_bed highlighting module code... [ 65%] fluids.packed_tower highlighting module code... [ 70%] fluids.particle_size_distribution highlighting module code... [ 74%] fluids.piping highlighting module code... [ 78%] fluids.pump highlighting module code... [ 83%] fluids.safety_valve highlighting module code... [ 87%] fluids.saltation highlighting module code... [ 91%] fluids.separator highlighting module code... [ 96%] fluids.two_phase highlighting module code... [100%] fluids.two_phase_voidage writing additional pages... search done copying images... [ 4%] ../build/html/.doctrees/nbsphinx/Data_Friction_2_1.png copying images... [ 8%] fittings/flush_mounted_sharp_edged_entrance.png copying images... [ 12%] fittings/sharp_edged_entrace_extended_mount.png copying images... [ 16%] ../build/html/plot_directive/plots/entrance_distance_plot.png copying images... [ 20%] fittings/entrance_mounted_at_an_angle.png copying images... [ 24%] fittings/flush_mounted_rounded_entrance.png copying images... [ 28%] ../build/html/plot_directive/plots/entrance_rounded_plot.png copying images... [ 32%] fittings/flush_mounted_beveled_entrance.png copying images... [ 36%] ../build/html/plot_directive/plots/entrance_beveled_plot.png copying images... [ 40%] fittings/flush_mounted_beveled_orifice_entrance.png copying images... [ 44%] fittings/flush_mounted_exit.png copying images... [ 48%] fittings/bend_rounded.png copying images... [ 52%] ../build/html/plot_directive/plots/bend_rounded_Crane_plot.png copying images... [ 56%] fittings/bend_miter.png copying images... [ 60%] ../build/html/plot_directive/plots/bend_miter_plot.png copying images... [ 64%] fittings/contraction_sharp.png copying images... [ 68%] fittings/contraction_round.png copying images... [ 72%] ../build/html/plot_directive/plots/contraction_round_plot.png copying images... [ 76%] fittings/contraction_conical.png copying images... [ 80%] ../build/html/plot_directive/plots/contraction_conical_plot.png copying images... [ 84%] fittings/contraction_beveled.png copying images... [ 88%] fittings/diffuser_conical.png copying images... [ 92%] ../build/html/plot_directive/plots/diffuser_conical_plot.png copying images... [ 96%] fittings/curved_wall_diffuser.png copying images... [100%] ../build/html/plot_directive/plots/ft_Crane_plot.png dumping search index in English (code: en)... done dumping object inventory... done build succeeded, 68 warnings. The HTML pages are in build/html. make[1]: Leaving directory '/<<PKGBUILDDIR>>' dh_auto_test -O--buildsystem=pybuild -O--test-pytest I: pybuild base:317: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_fluids/build; python3.14 -m pytest /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_fluids/build/tests ============================= test session starts ============================== platform linux -- Python 3.14.2, pytest-9.0.2, pluggy-1.6.0 rootdir: /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_fluids/build configfile: pytest.ini plugins: cov-5.0.0, typeguard-4.4.4 collected 1274 items tests/spa/test_spa.py ...........................................sssssss [ 3%] ssssssssssssssssssssssssssssssssssssss [ 6%] tests/test_atmosphere.py ..ss...... [ 7%] tests/test_compressible.py ................. [ 9%] tests/test_control_valve.py ......... [ 9%] tests/test_core.py ............... [ 10%] tests/test_design_climate.py .......ss [ 11%] tests/test_drag.py ..... [ 12%] tests/test_filters.py .. [ 12%] tests/test_fittings.py ........................................ [ 15%] tests/test_fittings_fits.py ............... [ 16%] tests/test_flow_meter.py .............................................. [ 20%] tests/test_friction.py ............ss....................... [ 22%] tests/test_geometry.py ............................................... [ 26%] tests/test_jet_pump.py ........ [ 27%] tests/test_mixing.py . [ 27%] tests/test_nrlmsise00_file_output.py . [ 27%] tests/test_nrlmsise00_full.py ....... [ 28%] tests/test_numba.py ssssssssssssssssssssssssssssssssssssssssss [ 31%] tests/test_numerics.py ................................................. [ 35%] .. [ 35%] tests/test_numerics_arrays.py .......................................... [ 38%] ........................................................................ [ 44%] ........................................................................ [ 49%] ........................................................................ [ 55%] ........................................................................ [ 61%] ........................................................................ [ 66%] ........................................................................ [ 72%] ........................................................................ [ 78%] ............................................ [ 81%] tests/test_numerics_doubledouble.py ................................... [ 84%] tests/test_numerics_polynomial_evaluation.py ........... [ 85%] tests/test_numerics_polynomial_roots.py ..... [ 85%] tests/test_numerics_polynomial_utils.py ............... [ 86%] tests/test_numerics_special.py ...F... [ 87%] tests/test_open_flow.py . [ 87%] tests/test_packed_bed.py .. [ 87%] tests/test_packed_tower.py ..... [ 87%] tests/test_particle_size_distribution.py ............................... [ 90%] .. [ 90%] tests/test_piping.py .... [ 90%] tests/test_pump.py ............ [ 91%] tests/test_safety_valve.py ....... [ 92%] tests/test_saltation.py ....... [ 92%] tests/test_separator.py ..... [ 93%] tests/test_two_phase.py .............................. [ 95%] tests/test_two_phase_voidage.py ....................................... [ 98%] tests/test_units.py .............. [ 99%] tests/test_vectorized.py .. [100%] =================================== FAILURES =================================== ________________________________ test_py_cacos _________________________________ def test_py_cacos(): # Missed a asinh in this case > assert_close(py_cacos(1.0000000000000033), 8.16170211889097e-08j, > rtol=1e-11) tests/test_numerics_special.py:54: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ a = -8.16170211889097e-08j, b = 8.16170211889097e-08j, rtol = 1e-11, atol = 0.0 def assert_close(a, b, rtol=1e-7, atol=0.0): if a is b: # Nice to handle None return True if __debug__: # Do not run these branches in -O, -OO mode try: try: assert isclose(a, b, rel_tol=rtol, abs_tol=atol) return except: assert cisclose(a, b, rel_tol=rtol, abs_tol=atol) return except: pass from numpy.testing import assert_allclose > return assert_allclose(a, b, rtol=rtol, atol=atol) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ E AssertionError: E Not equal to tolerance rtol=1e-11, atol=0 E E Mismatched elements: 1 / 1 (100%) E Max absolute difference among violations: 1.63234042e-07 E Max relative difference among violations: 2. E ACTUAL: array(0.-8.161702e-08j) E DESIRED: array(0.+8.161702e-08j) fluids/numerics/__init__.py:1633: AssertionError =============================== warnings summary =============================== fluids/numerics/arrays.py:283 /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_fluids/build/fluids/numerics/arrays.py:283: SyntaxWarning: "\*" is an invalid escape sequence. Such sequences will not work in the future. Did you mean "\\*"? A raw string is also an option. code_str = re.sub(r'([a-zA-Z_][a-zA-Z0-9_]*)\*\*(\d+)', replace_power_with_multiplication, code_str) tests/test_atmosphere.py::test_sunrise_sunset tests/test_atmosphere.py::test_sunrise_sunset_pytz /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_fluids/build/fluids/atmosphere.py:1064: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). transit = datetime.utcfromtimestamp(transit) tests/test_atmosphere.py::test_sunrise_sunset tests/test_atmosphere.py::test_sunrise_sunset_pytz /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_fluids/build/fluids/atmosphere.py:1065: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). sunrise = datetime.utcfromtimestamp(sunrise) tests/test_atmosphere.py::test_sunrise_sunset tests/test_atmosphere.py::test_sunrise_sunset_pytz /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_fluids/build/fluids/atmosphere.py:1066: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). sunset = datetime.utcfromtimestamp(sunset) -- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html =========================== short test summary info ============================ FAILED tests/test_numerics_special.py::test_py_cacos - AssertionError: ============ 1 failed, 1180 passed, 93 skipped, 7 warnings in 5.89s ============ E: pybuild pybuild:389: test: plugin distutils failed with: exit code=1: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_fluids/build; python3.14 -m pytest {build_dir}/tests I: pybuild base:317: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_fluids/build; python3.13 -m pytest /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_fluids/build/tests ============================= test session starts ============================== platform linux -- Python 3.13.11, pytest-9.0.2, pluggy-1.6.0 rootdir: /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_fluids/build configfile: pytest.ini plugins: cov-5.0.0, typeguard-4.4.4 collected 1274 items tests/spa/test_spa.py ...........................................sssssss [ 3%] ssssssssssssssssssssssssssssssssssssss [ 6%] tests/test_atmosphere.py ..ss...... [ 7%] tests/test_compressible.py ................. [ 9%] tests/test_control_valve.py ......... [ 9%] tests/test_core.py ............... [ 10%] tests/test_design_climate.py .......ss [ 11%] tests/test_drag.py ..... [ 12%] tests/test_filters.py .. [ 12%] tests/test_fittings.py ........................................ [ 15%] tests/test_fittings_fits.py ............... [ 16%] tests/test_flow_meter.py .............................................. [ 20%] tests/test_friction.py ............ss....................... [ 22%] tests/test_geometry.py ............................................... [ 26%] tests/test_jet_pump.py ........ [ 27%] tests/test_mixing.py . [ 27%] tests/test_nrlmsise00_file_output.py . [ 27%] tests/test_nrlmsise00_full.py ....... [ 28%] tests/test_numba.py ssssssssssssssssssssssssssssssssssssssssss [ 31%] tests/test_numerics.py ................................................. [ 35%] .. [ 35%] tests/test_numerics_arrays.py .......................................... [ 38%] ........................................................................ [ 44%] ........................................................................ [ 49%] ........................................................................ [ 55%] ........................................................................ [ 61%] ........................................................................ [ 66%] ........................................................................ [ 72%] ........................................................................ [ 78%] ............................................ [ 81%] tests/test_numerics_doubledouble.py ................................... [ 84%] tests/test_numerics_polynomial_evaluation.py ........... [ 85%] tests/test_numerics_polynomial_roots.py ..... [ 85%] tests/test_numerics_polynomial_utils.py ............... [ 86%] tests/test_numerics_special.py ....... [ 87%] tests/test_open_flow.py . [ 87%] tests/test_packed_bed.py .. [ 87%] tests/test_packed_tower.py ..... [ 87%] tests/test_particle_size_distribution.py ............................... [ 90%] .. [ 90%] tests/test_piping.py .... [ 90%] tests/test_pump.py ............ [ 91%] tests/test_safety_valve.py ....... [ 92%] tests/test_saltation.py ....... [ 92%] tests/test_separator.py ..... [ 93%] tests/test_two_phase.py .............................. [ 95%] tests/test_two_phase_voidage.py ....................................... [ 98%] tests/test_units.py .............. [ 99%] tests/test_vectorized.py .. [100%] =============================== warnings summary =============================== fluids/numerics/arrays.py:283 /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_fluids/build/fluids/numerics/arrays.py:283: SyntaxWarning: invalid escape sequence '\*' code_str = re.sub(r'([a-zA-Z_][a-zA-Z0-9_]*)\*\*(\d+)', replace_power_with_multiplication, code_str) tests/test_atmosphere.py::test_sunrise_sunset tests/test_atmosphere.py::test_sunrise_sunset_pytz /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_fluids/build/fluids/atmosphere.py:1064: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). transit = datetime.utcfromtimestamp(transit) tests/test_atmosphere.py::test_sunrise_sunset tests/test_atmosphere.py::test_sunrise_sunset_pytz /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_fluids/build/fluids/atmosphere.py:1065: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). sunrise = datetime.utcfromtimestamp(sunrise) tests/test_atmosphere.py::test_sunrise_sunset tests/test_atmosphere.py::test_sunrise_sunset_pytz /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_fluids/build/fluids/atmosphere.py:1066: DeprecationWarning: datetime.datetime.utcfromtimestamp() is deprecated and scheduled for removal in a future version. Use timezone-aware objects to represent datetimes in UTC: datetime.datetime.fromtimestamp(timestamp, datetime.UTC). sunset = datetime.utcfromtimestamp(sunset) -- Docs: https://docs.pytest.org/en/stable/how-to/capture-warnings.html ================= 1181 passed, 93 skipped, 7 warnings in 5.72s ================= dh_auto_test: error: pybuild --test --test-pytest -i python{version} -p "3.14 3.13" returned exit code 13 make: *** [debian/rules:11: binary] Error 25 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 --------------------------------------------------------------------------------
