Package: gnue-navigator
Version: 0.0.9-1
Severity: serious
Justification: Fail To Build From Source

Hi!

gnue-navigator now fails to build from source:

  cd . && python setup.py build \
    --build-base="/tmp/buildd/gnue-navigator-0.0.9/./build"
  You need GNUe-Common 0.5.2 or newer installed to install
  GNUe-Navigator
  make: *** [common-build-impl] Error 1

Attached is the full build log.

Regards,
-- 
Jérémy
dpkg-buildpackage: source package is gnue-navigator
dpkg-buildpackage: source version is 0.0.9-1
dpkg-buildpackage: source changed by Andrew Mitchell <[EMAIL PROTECTED]>
dpkg-buildpackage: source version without epoch 0.0.9-1
 fakeroot debian/rules clean
/usr/share/cdbs/1/class/python-distutils.mk:104: 
########################################################
/usr/share/cdbs/1/class/python-distutils.mk:105: Your package does not conform 
to the new Python policy.
/usr/share/cdbs/1/class/python-distutils.mk:106: Please consider updating.  
Here is some documentation:
/usr/share/cdbs/1/class/python-distutils.mk:107: 
http://wiki.debian.org/DebianPython/NewPolicy
/usr/share/cdbs/1/class/python-distutils.mk:108: 
http://wiki.debian.org/DebianPythonFAQ
/usr/share/cdbs/1/class/python-distutils.mk:109: 
########################################################
test -x debian/rules
test "`id -u`" = 0
dh_clean 
/usr/bin/make -f debian/rules reverse-config
make[1]: Entering directory 
`/home/python-rebuild/gnue-navigator/gnue-navigator-0.0.9'
/usr/share/cdbs/1/class/python-distutils.mk:104: 
########################################################
/usr/share/cdbs/1/class/python-distutils.mk:105: Your package does not conform 
to the new Python policy.
/usr/share/cdbs/1/class/python-distutils.mk:106: Please consider updating.  
Here is some documentation:
/usr/share/cdbs/1/class/python-distutils.mk:107: 
http://wiki.debian.org/DebianPython/NewPolicy
/usr/share/cdbs/1/class/python-distutils.mk:108: 
http://wiki.debian.org/DebianPythonFAQ
/usr/share/cdbs/1/class/python-distutils.mk:109: 
########################################################
make[1]: Nothing to be done for `reverse-config'.
make[1]: Leaving directory 
`/home/python-rebuild/gnue-navigator/gnue-navigator-0.0.9'
if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; 
fi
patches: 
if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; 
fi
if [ "reverse-patches" != "reverse-patches" ] ; then \
                /usr/bin/make -f debian/rules update-config ; \
        fi
for dir in debian/patches ; do \
            rm -f $dir/*.log ; \
        done
python setup.py clean -a
You need GNUe-Common 0.5.2 or newer installed to install GNUe-Navigator
make: [clean] Error 1 (ignored)
find . -name '*.pyc' -exec rm '{}' ';'
find . -name \*pyc -exec rm '{}' \;
 dpkg-source -b gnue-navigator-0.0.9
dpkg-source: building gnue-navigator using existing 
gnue-navigator_0.0.9.orig.tar.gz
dpkg-source: building gnue-navigator in gnue-navigator_0.0.9-1.diff.gz
dpkg-source: building gnue-navigator in gnue-navigator_0.0.9-1.dsc
 dpkg-genchanges -S
dpkg-genchanges: including full source code in upload
dpkg-buildpackage: source only upload (original source is included)
I: using fakeroot in build.
pbuilder-buildpackage/amd64 $Id: pbuilder-buildpackage-funcs,v 1.31 2006/05/30 
23:45:45 dancer Exp $
$Id: pbuilder-buildpackage,v 1.127 2006/08/15 13:14:25 dancer Exp $

Current time: Sun Oct  8 23:41:58 CEST 2006
pbuilder-time-stamp: 1160343718
Building the build Environment
 -> extracting base tarball [/var/cache/pbuilder/base.tgz]
 -> creating local configuration
 -> copying local configuration
 -> mounting /proc filesystem
 -> mounting /dev/pts filesystem
-> Mounting /home/lunar/debian/results
-> Mounting /var/cache/pbuilder/ccache
 -> policy-rc.d already exists
Obtaining the cached apt archive contents
Installing the build-deps
 -> Attempting to parse the build-deps : pbuilder-satisfydepends,v 1.28 
2006/05/30 23:45:45 dancer Exp $
 -> Considering  debhelper (>= 4.2.28)
   -> Trying debhelper
 -> Considering  python-dev (>= 2.3)
   -> Trying python-dev
 -> Considering  cdbs (>= 0.4.25-1ubuntu1)
   -> Trying cdbs
 -> Considering  gnue-common (>= 0.6.0)
   -> Trying gnue-common
 -> Installing  debhelper python-dev cdbs gnue-common
Reading package lists...
Building dependency tree...
The following extra packages will be installed:
  file gettext html2text intltool-debian libmagic1 mime-support po-debconf
  python python-central python-egenix-mxdatetime python-egenix-mxtools
  python-minimal python2.4 python2.4-dev python2.4-minimal
Suggested packages:
  devscripts doc-base dh-make cvs gettext-doc gnue-designer python-doc
  python-tk python-profiler python2.4-doc
Recommended packages:
  autotools-dev gnue-reports gnue-forms python-psycopg python-pygresql
  python-mysqldb libmail-sendmail-perl libcompress-zlib-perl
The following NEW packages will be installed:
  cdbs debhelper file gettext gnue-common html2text intltool-debian libmagic1
  mime-support po-debconf python python-central python-dev
  python-egenix-mxdatetime python-egenix-mxtools python-minimal python2.4
  python2.4-dev python2.4-minimal
0 upgraded, 19 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/10.7MB of archives.
After unpacking 35.6MB of additional disk space will be used.
Selecting previously deselected package libmagic1.
(Reading database ... 12096 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_4.17-4_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_4.17-4_amd64.deb) ...
Selecting previously deselected package mime-support.
Unpacking mime-support (from .../mime-support_3.37-1_all.deb) ...
Selecting previously deselected package python2.4-minimal.
Unpacking python2.4-minimal (from .../python2.4-minimal_2.4.3-9_amd64.deb) ...
Selecting previously deselected package python2.4.
Unpacking python2.4 (from .../python2.4_2.4.3-9_amd64.deb) ...
Selecting previously deselected package python-minimal.
Unpacking python-minimal (from .../python-minimal_2.4.3-11_all.deb) ...
Selecting previously deselected package python.
Unpacking python (from .../python_2.4.3-11_all.deb) ...
Selecting previously deselected package python-central.
Unpacking python-central (from .../python-central_0.5.6_all.deb) ...
Selecting previously deselected package cdbs.
Unpacking cdbs (from .../archives/cdbs_0.4.46_all.deb) ...
Selecting previously deselected package html2text.
Unpacking html2text (from .../html2text_1.3.2a-3_amd64.deb) ...
Selecting previously deselected package gettext.
Unpacking gettext (from .../gettext_0.15-2_amd64.deb) ...
Selecting previously deselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) 
...
Selecting previously deselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.6_all.deb) ...
Selecting previously deselected package debhelper.
Unpacking debhelper (from .../debhelper_5.0.40_all.deb) ...
Selecting previously deselected package python-egenix-mxtools.
Unpacking python-egenix-mxtools (from 
.../python-egenix-mxtools_2.0.6-4_amd64.deb) ...
Selecting previously deselected package python-egenix-mxdatetime.
Unpacking python-egenix-mxdatetime (from 
.../python-egenix-mxdatetime_2.0.6-4_amd64.deb) ...
Selecting previously deselected package gnue-common.
Unpacking gnue-common (from .../gnue-common_0.6.1-1_all.deb) ...
Selecting previously deselected package python2.4-dev.
Unpacking python2.4-dev (from .../python2.4-dev_2.4.3-9_amd64.deb) ...
Selecting previously deselected package python-dev.
Unpacking python-dev (from .../python-dev_2.4.3-11_all.deb) ...
Setting up libmagic1 (4.17-4) ...

Setting up file (4.17-4) ...
Setting up mime-support (3.37-1) ...

Setting up python2.4-minimal (2.4.3-9) ...

Setting up python2.4 (2.4.3-9) ...

Setting up python-minimal (2.4.3-11) ...
Setting up python (2.4.3-11) ...

Setting up python-central (0.5.6) ...
Setting up cdbs (0.4.46) ...

Setting up html2text (1.3.2a-3) ...

Setting up gettext (0.15-2) ...

Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.6) ...
Setting up debhelper (5.0.40) ...
Setting up python-egenix-mxtools (2.0.6-4) ...

Setting up python-egenix-mxdatetime (2.0.6-4) ...

Setting up gnue-common (0.6.1-1) ...
Setting up python2.4-dev (2.4.3-9) ...
Setting up python-dev (2.4.3-11) ...
 -> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
ccache is already the newest version.
The following NEW packages will be installed:
  fakeroot
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/97.4kB of archives.
After unpacking 406kB of additional disk space will be used.
Selecting previously deselected package fakeroot.
(Reading database ... 14042 files and directories currently installed.)
Unpacking fakeroot (from .../fakeroot_1.5.10_amd64.deb) ...
Setting up fakeroot (1.5.10) ...

Copying back the cached apt archive contents
Copying source file
    -> copying [../gnue-navigator_0.0.9-1.dsc]
    -> copying [../gnue-navigator_0.0.9.orig.tar.gz]
    -> copying [../gnue-navigator_0.0.9-1.diff.gz]
Extracting source
dpkg-source: warning: no utmp entry available and LOGNAME not defined; using 
uid of process (1234)
dpkg-source: warning: extracting unsigned source package 
(./gnue-navigator_0.0.9-1.dsc)
dpkg-source: extracting gnue-navigator in gnue-navigator-0.0.9
dpkg-source: unpacking gnue-navigator_0.0.9.orig.tar.gz
dpkg-source: applying ./gnue-navigator_0.0.9-1.diff.gz
 -> Building the package
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
dpkg-buildpackage: source package is gnue-navigator
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
dpkg-buildpackage: source version is 0.0.9-1
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
dpkg-buildpackage: source changed by Andrew Mitchell <[EMAIL PROTECTED]>
dpkg-architecture: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
dpkg-architecture: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
dpkg-buildpackage: host architecture amd64
dpkg-buildpackage: source version without epoch 0.0.9-1
dpkg-checkbuilddeps: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
dpkg-architecture: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
dpkg-architecture: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
 fakeroot debian/rules clean
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (0)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (0)
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (0)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (0)
/usr/share/cdbs/1/class/python-distutils.mk:104: 
########################################################
/usr/share/cdbs/1/class/python-distutils.mk:105: Your package does not conform 
to the new Python policy.
/usr/share/cdbs/1/class/python-distutils.mk:106: Please consider updating.  
Here is some documentation:
/usr/share/cdbs/1/class/python-distutils.mk:107: 
http://wiki.debian.org/DebianPython/NewPolicy
/usr/share/cdbs/1/class/python-distutils.mk:108: 
http://wiki.debian.org/DebianPythonFAQ
/usr/share/cdbs/1/class/python-distutils.mk:109: 
########################################################
test -x debian/rules
test "`id -u`" = 0
dh_clean 
/usr/bin/make -f debian/rules reverse-config
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (0)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (0)
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (0)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (0)
make[1]: Entering directory `/tmp/buildd/gnue-navigator-0.0.9'
/usr/share/cdbs/1/class/python-distutils.mk:104: 
########################################################
/usr/share/cdbs/1/class/python-distutils.mk:105: Your package does not conform 
to the new Python policy.
/usr/share/cdbs/1/class/python-distutils.mk:106: Please consider updating.  
Here is some documentation:
/usr/share/cdbs/1/class/python-distutils.mk:107: 
http://wiki.debian.org/DebianPython/NewPolicy
/usr/share/cdbs/1/class/python-distutils.mk:108: 
http://wiki.debian.org/DebianPythonFAQ
/usr/share/cdbs/1/class/python-distutils.mk:109: 
########################################################
make[1]: Nothing to be done for `reverse-config'.
make[1]: Leaving directory `/tmp/buildd/gnue-navigator-0.0.9'
if [ "reverse-patches" = "reverse-patches" ]; then rm -f debian/stamp-patched; 
fi
patches: 
if [ "reverse-patches" != "reverse-patches" ]; then touch debian/stamp-patched; 
fi
if [ "reverse-patches" != "reverse-patches" ] ; then \
                /usr/bin/make -f debian/rules update-config ; \
        fi
for dir in debian/patches ; do \
            rm -f $dir/*.log ; \
        done
python setup.py clean -a
You need GNUe-Common 0.5.2 or newer installed to install GNUe-Navigator
make: [clean] Error 1 (ignored)
find . -name '*.pyc' -exec rm '{}' ';'
find . -name \*pyc -exec rm '{}' \;
 dpkg-source -b gnue-navigator-0.0.9
dpkg-source: warning: no utmp entry available and LOGNAME not defined; using 
uid of process (1234)
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
dpkg-architecture: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
dpkg-source: building gnue-navigator using existing 
gnue-navigator_0.0.9.orig.tar.gz
dpkg-source: building gnue-navigator in gnue-navigator_0.0.9-1.diff.gz
dpkg-source: building gnue-navigator in gnue-navigator_0.0.9-1.dsc
 debian/rules build
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
/usr/share/cdbs/1/class/python-distutils.mk:104: 
########################################################
/usr/share/cdbs/1/class/python-distutils.mk:105: Your package does not conform 
to the new Python policy.
/usr/share/cdbs/1/class/python-distutils.mk:106: Please consider updating.  
Here is some documentation:
/usr/share/cdbs/1/class/python-distutils.mk:107: 
http://wiki.debian.org/DebianPython/NewPolicy
/usr/share/cdbs/1/class/python-distutils.mk:108: 
http://wiki.debian.org/DebianPythonFAQ
/usr/share/cdbs/1/class/python-distutils.mk:109: 
########################################################
test -x debian/rules
mkdir -p "."
/usr/bin/make -f debian/rules reverse-config
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
make[1]: Entering directory `/tmp/buildd/gnue-navigator-0.0.9'
/usr/share/cdbs/1/class/python-distutils.mk:104: 
########################################################
/usr/share/cdbs/1/class/python-distutils.mk:105: Your package does not conform 
to the new Python policy.
/usr/share/cdbs/1/class/python-distutils.mk:106: Please consider updating.  
Here is some documentation:
/usr/share/cdbs/1/class/python-distutils.mk:107: 
http://wiki.debian.org/DebianPython/NewPolicy
/usr/share/cdbs/1/class/python-distutils.mk:108: 
http://wiki.debian.org/DebianPythonFAQ
/usr/share/cdbs/1/class/python-distutils.mk:109: 
########################################################
make[1]: Nothing to be done for `reverse-config'.
make[1]: Leaving directory `/tmp/buildd/gnue-navigator-0.0.9'
if [ "debian/stamp-patched" = "reverse-patches" ]; then rm -f 
debian/stamp-patched; fi
patches: 
if [ "debian/stamp-patched" != "reverse-patches" ]; then touch 
debian/stamp-patched; fi
if [ "debian/stamp-patched" != "reverse-patches" ] ; then \
                /usr/bin/make -f debian/rules update-config ; \
        fi
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
dpkg-parsechangelog: warning: no utmp entry available and LOGNAME not defined; 
using uid of process (1234)
debian: warning: no utmp entry available and LOGNAME not defined; using uid of 
process (1234)
make[1]: Entering directory `/tmp/buildd/gnue-navigator-0.0.9'
/usr/share/cdbs/1/class/python-distutils.mk:104: 
########################################################
/usr/share/cdbs/1/class/python-distutils.mk:105: Your package does not conform 
to the new Python policy.
/usr/share/cdbs/1/class/python-distutils.mk:106: Please consider updating.  
Here is some documentation:
/usr/share/cdbs/1/class/python-distutils.mk:107: 
http://wiki.debian.org/DebianPython/NewPolicy
/usr/share/cdbs/1/class/python-distutils.mk:108: 
http://wiki.debian.org/DebianPythonFAQ
/usr/share/cdbs/1/class/python-distutils.mk:109: 
########################################################
make[1]: Nothing to be done for `update-config'.
make[1]: Leaving directory `/tmp/buildd/gnue-navigator-0.0.9'
cd . && python setup.py build 
--build-base="/tmp/buildd/gnue-navigator-0.0.9/./build"
You need GNUe-Common 0.5.2 or newer installed to install GNUe-Navigator
make: *** [common-build-impl] Error 1
pbuilder: Failed autobuilding of package
 -> Aborting with an error
 -> unmounting dev/pts filesystem
 -> unmounting proc filesystem
 -> unmounting /var/cache/pbuilder/ccache filesystem
 -> unmounting /home/lunar/debian/results filesystem
 -> cleaning the build env 
    -> removing directory /var/cache/pbuilder/build//23137 and its 
subdirectories

Attachment: signature.asc
Description: Digital signature

Reply via email to