Your message dated Sat, 28 Oct 2006 03:47:16 -0700
with message-id <[EMAIL PROTECTED]>
and subject line Bug#395859: fixed in libgeo-postcode-perl 0.15.dfsg.1-3
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: libgeo-postcode-perl
Version: 0.15.dfsg.1-2
Severity: serious
Hello,
There was a problem while autobuilding your package:
> Automatic build of libgeo-postcode-perl_0.15.dfsg.1-2 on avidan by
> sbuild/i386 98
> Build started at 20061028-0038
> ******************************************************************************
> Checking available source versions...
> Fetching source files...
> Reading package lists...
> Building dependency tree...
> Need to get 16.4kB of source archives.
> Get:1 http://ftp.fr.debian.org sid/main libgeo-postcode-perl 0.15.dfsg.1-2
> (dsc) [669B]
> Get:2 http://ftp.fr.debian.org sid/main libgeo-postcode-perl 0.15.dfsg.1-2
> (tar) [12.2kB]
> Get:3 http://ftp.fr.debian.org sid/main libgeo-postcode-perl 0.15.dfsg.1-2
> (diff) [3462B]
> Fetched 16.4kB in 0s (49.2kB/s)
> Download complete and in download only mode
> ** Using build dependencies supplied by package:
> Build-Depends: debhelper (>= 5.0.0)
> Build-Depends-Indep: perl (>= 5.8.0-7)
> Checking for already installed source dependencies...
> debhelper: missing
> perl: already installed (5.8.8-6.1 >= 5.8.0-7 is satisfied)
> Checking for source dependency conflicts...
> /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install
> debhelper
> Reading package lists...
> Building dependency tree...
> The following extra packages will be installed:
> file gettext gettext-base html2text intltool-debian libmagic1 po-debconf
> Suggested packages:
> dh-make cvs gettext-doc
> Recommended packages:
> curl wget lynx libmail-sendmail-perl libcompress-zlib-perl
> The following NEW packages will be installed:
> debhelper file gettext gettext-base html2text intltool-debian libmagic1
> po-debconf
> 0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded.
> Need to get 0B/3142kB of archives.
> After unpacking 9896kB of additional disk space will be used.
> Selecting previously deselected package gettext-base.
> (Reading database ... 9958 files and directories currently installed.)
> Unpacking gettext-base (from .../gettext-base_0.15-2_i386.deb) ...
> Selecting previously deselected package libmagic1.
> Unpacking libmagic1 (from .../libmagic1_4.17-4_i386.deb) ...
> Selecting previously deselected package file.
> Unpacking file (from .../archives/file_4.17-4_i386.deb) ...
> Selecting previously deselected package html2text.
> Unpacking html2text (from .../html2text_1.3.2a-3_i386.deb) ...
> Selecting previously deselected package gettext.
> Unpacking gettext (from .../gettext_0.15-2_i386.deb) ...
> Selecting previously deselected package intltool-debian.
> Unpacking intltool-debian (from
> .../intltool-debian_0.35.0+20060710.1_all.deb) ...
> Selecting previously deselected package po-debconf.
> Unpacking po-debconf (from .../po-debconf_1.0.7_all.deb) ...
> Selecting previously deselected package debhelper.
> Unpacking debhelper (from .../debhelper_5.0.40_all.deb) ...
> Setting up gettext-base (0.15-2) ...
>
> Setting up libmagic1 (4.17-4) ...
>
> Setting up file (4.17-4) ...
> Setting up html2text (1.3.2a-3) ...
>
> Setting up gettext (0.15-2) ...
>
> Setting up intltool-debian (0.35.0+20060710.1) ...
> Setting up po-debconf (1.0.7) ...
> Setting up debhelper (5.0.40) ...
> Checking correctness of source dependencies...
> Toolchain package versions: libc6-dev_2.3.6.ds1-7
> linux-kernel-headers_2.6.18-6 gcc-4.1_4.1.1-17 g++-4.1_4.1.1-17
> binutils_2.17-3 libstdc++6-4.1-dev_4.1.1-17 libstdc++6_4.1.1-17
> ------------------------------------------------------------------------------
> gpg: Signature made Thu Oct 12 12:15:48 2006 CEST using DSA key ID 5178E2A5
> gpg: Can't check signature: public key not found
> dpkg-source: extracting libgeo-postcode-perl in
> libgeo-postcode-perl-0.15.dfsg.1
> dpkg-source: unpacking libgeo-postcode-perl_0.15.dfsg.1.orig.tar.gz
> dpkg-source: applying
> /home/buildd/build/libgeo-postcode-perl_0.15.dfsg.1-2.diff.gz
> dpkg-buildpackage: source package is libgeo-postcode-perl
> dpkg-buildpackage: source version is 0.15.dfsg.1-2
> dpkg-buildpackage: host architecture i386
> dpkg-buildpackage: source version without epoch 0.15.dfsg.1-2
> /usr/bin/fakeroot debian/rules clean
> dh_testdir
> dh_testroot
> # Add commands to clean up after the build process here
> [ ! -f Makefile ] || /usr/bin/make realclean
> dh_clean build-stamp install-stamp
> debian/rules build
> dh_testdir
> # Add commands to compile the package here
> /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
> Checking if your kit is complete...
> Warning: the following files are missing in your kit:
> postcodedata/postcodes.csv
> Please inform the author.
> Warning: prerequisite DBD::SQLite 0 not found.
> Writing Makefile for Geo::Postcode
> /usr/bin/make OPTIMIZE="-Wall -O2 -g"
> make[1]: Entering directory `/build/buildd/libgeo-postcode-perl-0.15.dfsg.1'
> cp lib/Geo/Postcode.pm blib/lib/Geo/Postcode.pm
> cp lib/Geo/Postcode/Location.pm blib/lib/Geo/Postcode/Location.pm
> Manifying blib/man3/Geo::Postcode.3pm
> Manifying blib/man3/Geo::Postcode::Location.3pm
> make[1]: Leaving directory `/build/buildd/libgeo-postcode-perl-0.15.dfsg.1'
> touch build-stamp
> /usr/bin/fakeroot debian/rules binary
> dh_testdir
> dh_testroot
> dh_clean -k
> # Add commands to install the package into debian/ACKAGE_NAME here
> /usr/bin/make test
> make[1]: Entering directory `/build/buildd/libgeo-postcode-perl-0.15.dfsg.1'
> PERL_DL_NONLAZY=1 /usr/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
> Can't locate DBI.pm in @INC (@INC contains: ../lib ./test blib/lib blib/arch
> /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8
> /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8
> /usr/local/lib/site_perl .) at test.pl line 3.
> BEGIN failed--compilation aborted at test.pl line 3.
> make[1]: *** [test_dynamic] Error 2
> make[1]: Leaving directory `/build/buildd/libgeo-postcode-perl-0.15.dfsg.1'
> make: *** [install-stamp] Error 2
> ******************************************************************************
> Build finished at 20061028-0038
> FAILED [dpkg-buildpackage died]
> Purging chroot-unstable/build/buildd/libgeo-postcode-perl-0.15.dfsg.1
> ------------------------------------------------------------------------------
> /usr/bin/sudo dpkg --root=/home/buildd/build/chroot-unstable --purge
> po-debconf intltool-debian libmagic1 gettext file html2text gettext-base
> debhelper
> (Reading database ... 10591 files and directories currently installed.)
> Removing debhelper ...
> Removing po-debconf ...
> Removing intltool-debian ...
> Removing gettext ...
> Removing file ...
> Purging configuration files for file ...
> Removing html2text ...
> Purging configuration files for html2text ...
> Removing gettext-base ...
> Removing libmagic1 ...
> Purging configuration files for libmagic1 ...
> ******************************************************************************
> Finished at 20061028-0038
> Build needed 00:00:08, 264k disk space
--
Julien Danjou
.''`. Debian Developer
: :' : http://julien.danjou.info
`. `' http://people.debian.org/~acid
`- 9A0D 5FD9 EB42 22F6 8974 C95C A462 B51E C2FE E5CD
signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---
Source: libgeo-postcode-perl
Source-Version: 0.15.dfsg.1-3
We believe that the bug you reported is fixed in the latest version of
libgeo-postcode-perl, which is due to be installed in the Debian FTP archive:
libgeo-postcode-perl_0.15.dfsg.1-3.diff.gz
to
pool/main/libg/libgeo-postcode-perl/libgeo-postcode-perl_0.15.dfsg.1-3.diff.gz
libgeo-postcode-perl_0.15.dfsg.1-3.dsc
to pool/main/libg/libgeo-postcode-perl/libgeo-postcode-perl_0.15.dfsg.1-3.dsc
libgeo-postcode-perl_0.15.dfsg.1-3_all.deb
to
pool/main/libg/libgeo-postcode-perl/libgeo-postcode-perl_0.15.dfsg.1-3_all.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [EMAIL PROTECTED],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Dominic Hargreaves <[EMAIL PROTECTED]> (supplier of updated
libgeo-postcode-perl package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [EMAIL PROTECTED])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.7
Date: Sat, 28 Oct 2006 11:30:58 +0100
Source: libgeo-postcode-perl
Binary: libgeo-postcode-perl
Architecture: source all
Version: 0.15.dfsg.1-3
Distribution: unstable
Urgency: medium
Maintainer: Dominic Hargreaves <[EMAIL PROTECTED]>
Changed-By: Dominic Hargreaves <[EMAIL PROTECTED]>
Description:
libgeo-postcode-perl - UK Postcode validation and location
Closes: 395859
Changes:
libgeo-postcode-perl (0.15.dfsg.1-3) unstable; urgency=medium
.
* Fix FTBFS (build-dep on libdbi-perl, closes: #395859)
* Also Depends on libdbi-perl; even though not all functionality
requires it.
Files:
e99cc6b29825d8b62e63911a6580be96 682 perl optional
libgeo-postcode-perl_0.15.dfsg.1-3.dsc
e39635b131f3c56cfd4f9e5a19155f6f 3562 perl optional
libgeo-postcode-perl_0.15.dfsg.1-3.diff.gz
c03574f84679b772ddf5950bea9b039e 24654 perl optional
libgeo-postcode-perl_0.15.dfsg.1-3_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFQzGgYzuFKFF44qURAoKMAKC0wOmnUoq9/wUWodkveHElzf/8QACfUZX8
N/TFrjtEKU1zSx39BShDKVI=
=EbXo
-----END PGP SIGNATURE-----
--- End Message ---
